Tender For Installation Of Solar Submersible At Shikarpur Primary School
Tender Value
3.70 Lakhs
Estimated cost
Bid Submission
30 May 2023
0 days left
EMD
7406
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shikarpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Solar Submersible At Shikarpur Primary School
BOQ
| Sl. No. | Item Description |
| 1 | Labour for boring tube u,ell of required dia. by i.vater iet systeni thlough any type of soil\"strata including hire and labour charges fbr boring pipes. scafloldins. tools and plants as necessary and taliing out them and lowering pipes, strainers. blind pipe etc. ancl fitting and fixing the same complete inclLriiing blLcl |
| 2 | Labour for boring tube u,ell of required dia. by i.vater iet systeni thlough any type of soil\"strata including hire and labour charges fbr boring pipes. scafloldins. tools and plants as necessary and taliing out them and lowering pipes, strainers. blind pipe etc. ancl fitting and fixing the same complete inclLriiing blLcl |
| 3 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I) P-14/19-III(i) Reducing Socket (125mm X80 mm) |
| 4 | Supply of G. I. pipes of TATA make including necessary sockets(j) 125 mm dia. |
| 5 | Supply of PVC pipes & fittings Schedule 40 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I)P-14/19-III |
| 6 | Supply of PVC pipes & fittings Schedule 40 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I)P-14/19-III |
| 7 | Housing clamp of M.S. plate of 25mm. width and 20 mm. thick with arms extended on both sides upto 0.30 m. length (each side) with two drilled holes on both sides for insention of total 4 Nos. M.S. nuts & bolts of 75 x 20 mm. dia. size with M.S. vvashels etc. complcte. (a) I25 mm. dia. (Ret SE, CCapprovd rate) |
| 8 | Supplying. fitting and fixing steel cutter piece upto 450 mm long rvith sockets. (i) 75mm dia. [ P- 53 /9] |
| 9 | Supplying PVC strainer of approved make with adapter conforming to I.S.1281 8 specifications. [ P-52 / 6 ] (i) 80 mm dil.[P-53/52/6] |
| 10 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessaryarrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required.[P-55/20] |
| 11 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.Note: Initial 6 m. of Annular space between the housing pipe and the boreshould not be shrouded with Pea size gravel to avoid contamination with surface water[P-55/24] |
| 12 | supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(d) 2000 litre capacity[P-37/6] |
| 13 | Labour for punching hole in plastic water storage tank upto 50 mm dia.[P-38/13] |
| 14 | Labour for punching hole in plastic water storage tank upto 50 mm dia.[P-37/10]a) Upto 1st story from G.L. |
| 15 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting willbe made seperately)(a) For Exposed Work PVC Pipes (Dia)15 mm[P-12/9 |
| 16 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes (Dia)15 mm[P-12/9 |
| 17 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes (Dia)15 mm[P-12/9 |
| 18 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conlbrrning to ASTMD - 178-5 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(A) PVC Pipes 32 mur dia |
| 19 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).[P-6/7(a)] |
| 20 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or simila[P-6/7(b)] |
| 21 | Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings(tested to 21 kg per sq. cm.).(a)32 mm .dia [P-4/4] |
| 22 | Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings(tested to 21 kg per sq. cm.).(a)20 mm .dia [P-4/4] |
| 23 | Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming thebottom, bailing out water as required complete (a) Depth of excavation not exceeding 1,500 mm [P-1/2 of Buldg ,Sch.] |
| 24 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand |
| 25 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand[p-14/21of Buldg ,Sch.] |
| 26 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation.(a) 1:3:6 proportio[p-23/1of Buldg ,Sch.] |
| 27 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.[p-26/10 of Buldg ,Sch.] |
| 28 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth[p-15/8 of Buldg ,Sch.] |
| 29 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor[p-16/16 of Buldg ,Sch.] |
| 30 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction[p-43/40 of Buldg ,Sch.] |
| 31 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)[p-42/40 of Buldg ,Sch.] |
| 32 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar(c) 15 mm thick plaster[p-189/1 of Buldg ,Sch.] |
| 33 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(a) 10 mm thick plaster[p-189/1 of Buldg ,Sch.] |
| 34 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m[p-192/15of Buldg ,Sch.] |
| 35 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.[p-197/17of Buldg ,Sch.] |
| 36 | a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc..[p-200/1of Buldg ,Sch.] |
| 37 | A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessaryWith super gloss (hi-gloss)(ii) Two coats (white in shade) :[p-200/2of Buldg ,Sch.] |
| 38 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cement |
| 39 | Supplying, fitting & fixing best quality digital printed Ceramictiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid overexisting hard ready surface) all complete as per direction of Engineer-in-chargeNote: Add extra for each addl, floor over the rate for item 39 of subhead A (II) above 4th floor -Rs. 16/- per Sq.m.[p-68/39 of Buldg ,Sch.] |
| 40 | Solour moudile supply Tansport &installation complete 1300 WP with 30 WP SVP panel (vide SL No-38 of ZP Sch |
| 41 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.I) For structural members of specified sections weighing less than22.5 Kg./m[p-99/1 of Buldg ,Sch.] |
| 42 | Power contal unit including MPPT for 1 HP capacity submersible motor set (Vide SL No -40 of ZP Sch) |
| 43 | Supplyand instalation of 80 mm bore well 1 HP submersiblep pump including neeossary cable as per dircetion of EIC (Vide Sl No -42 of ZP) |
| 44 | Eathing with 50mm dia GI pipe 3.6 mm thickx 3.040 mts long and 4 SWG GI TATA mediumGI pipe (Vide Sl No -43 of ZP) |
| 45 | Light protection polo mounted lighting arrester with 3\" x 1.5 G.I pipe upto depth of 3.65Mts (Vide Sl No -44 of ZP) |
| 46 | R.C.C. well ring made with cement concrete 1:1.5:3 with stone chips and 0.80% reinforcement (including the cost of shuttering and reinforcement) cast at site fitted and fixed in position after proper curing true to plumb in the well including jointing with cement mortar 1:2 complete as per directiona) 65 mm thick and 0.9 metre internal dia.[p-265/2 of Buldg ,Sch.] |
| 47 | Supply ofordinary brick bast for filling the pit |
| 48 | Labour for filling the pit with bricks bats .1/2*1Mazdoor =1/2*Rs245.00=122.50 |
| 49 | Supplying,hoisting,fitting and fixing R.C.C. precast thin lintels, 75 mm. thick (1:1.5:3) conforming to the specification laid down in C.B.R.I. data sheet No.1 with stone chips, sand, cement and reinforcement (both main and distribution) bars upto 1.00 percent as per drawing and specificationincluding placing in situ and supporting arrangement for taking the load ofsuper-imposed brick work and striking of the same when directed.II. Other than SAIL/ TATA/RINL[p-42/34 of Buldg ,Sch.] |
| 50 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining withjointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.[p-212/21 of Buldg ,Sch.] |
AI Tender Summary
Tender Timeline
May 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender