Tender For Revival & Energisation Of B Nuagaon-Ii R/L L.I. Project Under Patrapur Block In Ganjam District Out Of State Plan Grant2022-23
Tender Value
14.58 Lakhs
Estimated cost
Bid Submission
31 May 2023
0 days left
EMD
14582
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nuagaon → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Revival & Energisation of B Nuagaon-II R/L L.I. Project under Patrapur Block in Ganjam District out of STATE PLAN Grant2022-23
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-May-2023 | Corrigendum-1 | Date | 31-May-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | ScheduleA( CivilWorks & Supply of Materials) |
| 2 | Earth work in hard soil for excavation of foundation including dressing and levlling the bed and depositing the soil within 50 mtr. initial lead and 1.5 mtr. initial lift as per direction of Engineer-in-charge. |
| 3 | Filling in foundation and plinth with sand wellwatered and rammed including cost of sand as per direction of Engineer-in-charge. |
| 4 | C.C(1:4:8) with 4 Cm. size H.B.G metal laying and hoistingetc. complete with curing as per direction of Engineer-in-charge |
| 5 | Brick work with Fly ash bricks of(23cm x 11 cm x 8 cm )in cement mortar (1:6) in foundation and plinth with curingetc.complete as per direction of Engineer-in-charge. |
| 6 | Cement concrete (1:2:4) for R.C.C. works with 12mm size h.g.b. chips including hoisting and laying etc. complete with curing as per direction of Engineer-in-charge |
| 7 | Providing & supplyingof M.S.Rod forfor M.S. Reinforcement for R.C.C work including cutting, bending, binding & tying the grills & placing in position including cost of binding wire etc.complete as per direction of Engineer-in-charge |
| 8 | Rigidsmooth centering and shuttering for R.C.C. works including false work and dismentling them after casting including cost of materials complete etc. completeforColumn baseetc |
| 9 | Rigidsmooth centering and shuttering for R.C.C. works including false work and dismentling them after casting including cost of materials complete etc. completefor Slab,Column,Beam etc. |
| 10 | Rigidsmooth centering and shuttering for R.C.C. works including false work and dismentling them after casting including cost of materials complete etc. completefor Lintel |
| 11 | Cement concrete (1:2:4) with 12mm size h.g.b. chips including hoisting and laying etc. complete with curing as per direction of Engineer-in-charge |
| 12 | 12 mm thick cement plastering with cement mortar(1:6)over brick work with curing etc.complete.as per direction of Engineer-in-charge. |
| 13 | Filling F & P with excavated materials, earth, moorum including watering and ramming as directed by the Engineer-in-charge. |
| 14 | Labour charges for conveyance of 200mmdiaPVC pipes from stack yardto work siteandLaying & fittingof the sameas per direction ofsite Engineer in charge. |
| 15 | Labour charges for conveyance of 160mmdiaPVC pipes from stack yardto work siteandLaying & fittingof the sameas per direction ofsite Engineer in charge. |
| 16 | Brick work with Fly ash bricks of size (23cm x 11 cm x 8 cm ) having crushing strength not less than 75kg./cm2 with dimensional tolerance+ 8% in cement mortar (1:6)inSuperstructurewith curingetc.complete as per direction of Engineer-in-charge. |
| 17 | 2.5 cm artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size hard broken granite chips etc. complete with curing as per direction of Engineer-in-charge |
| 18 | Finishing walls with water proofing cement paint of approved shade on new work two coats to give an even shape including cost of paint etc.complete as per direction of Engineer-in-Charge. |
| 19 | Painting two coats with any approved paint over a coat of primer on new M.S Shutter including cost of paint ,primer and labour charges and all taxes etc..complete as per direction of Engineer-in-Charge. |
| 20 | Providing electrificaton to the Pump chamber by wiring the room with required item of materials including cost ofmaterial,labour,T& P etc. complete as per direction of Engineer-in-charge. |
| 21 | Construction of Display Board with 45mm dia steel pipes 2nos with a height of 1.50mtr over the ground level having couping depth of 0.60mtrwith a width of 1mtr jointed with MS plate of size 1.00mtrx0.75mtr and painting,lettering the detail salient featuresof project over the plate having radium back ground etc. complete as per direction of Engineer-in-Charge |
| 22 | Installation ofMono Block Pump Set,on fixed foundation ,fitting of 100 mm dia G.I.Pipe in Suction side & delivery side with required G.I.Flange, Bend, socket, primary unit, foot valve,N.R.Valve, nut bolt, rubber packing etc., cutting ,threading & welding of G.I.Pipe connecting the same with Z type to main pressure P.V.C. pipe line including cost of white lead paint ,cotton tape,M seal ,hickaw blade and other unforseen items as required for fitting works ,earch cutting of river bank , river belt, making Sump pit for dipping of foot valve at required depth for smooth running of Pump set including all transportation of materials etc.& Electrical connectioncompleteas per direction of the site Engineer-in-charge |
| 23 | Supplythe hard copy & soft copy of 3 stage Photographs of the projectandpreparation of Handing over Documents of Panipanchayat etc.completeas perdirection of site Engineer in charge. |
| 24 | Providing ,fitting & fixingofM.S.shutter confirming to IS No.6248/7 of size (0.76x0.90) sq.mtrhaving32mmx32mm angle iron framed chowkhat and shutter plate with 18SWG MS Sheet includingall costs,taxes etccomplete with priming & paintingas per satisfaction of Engineer-in-Charge. |
| 25 | Providing ,fitting & fixingofM.S. WINDOWconfirming to IS No.6248/7 of size (0.76x1.00) sq.mtrhaving32mmx32mm angle iron framed chowkhat and shutter plate with 18SWG MS Sheet includingall costs,taxes etccomplete with priming & paintingas per satisfaction of Engineer-in-Charge. |
| 26 | Cost for canal crossing works by 150mm dia GI Pipe and fittings for S joint with cutting & welding works including laying & fitting Including transportation |
| 27 | 10 H.P Manoblock centrifugal pump set 1700 LPM at18 mtr head squarrel cage induction motor fitted with campanion flanges and CI \"F\" insulation suitable for operation at 415 volt + 6% - 15% , 3 phase 50 Hz A.C power supply confirming to I.S 9079 /2002 with ISI mark and guarantee. The materials of construction as given below.(a) Casing : F.C. 200 as per IS 210/1978.b)Impeller: Bronze grade LTB - 2 of IS 318/1981.c) Shaft : High Carbon steel grade 40c 8 of IS 1570(Part-2)d) Gasket: As per IS 5120/1977. |
| 28 | Auto Star Delta Starter of sheet Steel enclosure suitable for operation of squirrel cage Induction Motor up to 15 HP with 20 MP ( AC/3) duly contactor at 415 Volt + 6% - 15% , 3 phase 50 Hz , A.C supply with Over Load Relay range 8.9 to13.5 Amp and No volt coil with electronic timer suitable for operation at voltage range of 300 -440 volt and to provide dependable protection during over load and single phasing as per direction of Engineer-in-charge. |
| 29 | Main Switch 63 Amp including fitting and fixing as per IS No.-4064(Part-I & II) with utilisation capacity category AC-22. |
| 30 | 5 KVAR Capacitoras per ISI Standard specifications |
| 31 | Motor Hood cover size 0.60 mtr. X 0.45mtr. X0.45 mtrmade with.18 SWG(cold rolled) M.S. sheet with one coat of red oxide primer & two coats of smoke Gray enamel paint on both the sides (in side & out side)suitable to cover 3 phase centrifugal mono block pump set from 10 HP to 20 HP & havng provisiion for attachment weith the groups on rear side of the pannel board as per direction of Engineer-in-charge. |
| 32 | Basefor Motor of size 0.53mx0.28 made with 75mm M.S. Channel having suitable holes for fitting of different sizeand make 3 phase centrifugal mono block pump set from 10 HP to 20 HP colored with one coat of red oxide primer and two coats of smoke gray paint as per direction of Engineer-in-charge.. |
| 33 | 3 Core x 10mm² Insulated ( HD ) armoured Electric Cable with Alluminium conductor for use in 3 phase power system of working voltage up to and including 1100 Volts at 50 Hz confirming to IS 1554 (Pt - 5 ) / 1988.with ISI mark & guarantee.as per direction ofsite Engineer in charge. |
| 34 | 100mm dia nominal bore G.I.Pipe having wall thickness 4.5mm electrical resistance welded of medium class conforming to IS - 1239 (part-I/2004) with latest mendments,screwed at both ends as per IS -554 socketed at one end and the other end protected with plastic threaded protector. The socket conforming to IS:1239 (Part-II/1992) with latest Amendments in random length of 4 to 7 mtrs. Each pipe should bear ISI Certification and manufacturers name/trademark . |
| 35 | 150mm dia nominal bore G.I.Pipe having wall thickness 4.5mm electrical resistance welded of medium class conforming to IS - 1239 (part-I/2004) with latest mendments,screwed at both ends as per IS -554 socketed at one end and the other end protected with plastic threaded protector. The socket conforming to IS:1239 (Part-II/1992) with latest Amendments in random length of 4 to 7 mtrs. Each pipe should bear ISI Certification and manufacturers name/trademark . |
| 36 | 100 mm dia C.I. Screw Base Kirloskar Make Foot valve as per ISI standard specifications. |
| 37 | 100 mm dia C.I. N.R.Valve confirming to IS - 5312 (Pt-I) with ISI mark , GM fitting S/S hinge pin , without by pass |
| 38 | 100mm dia G.I.Bend confirming to IS No. 1239 (Pt-II/1992) |
| 39 | 100mm dia G.I.Screw Boss Flange conforming to IS:No.6392/72 |
| 40 | 150mm dia G.I.Screw Boss Flange conforming to IS:No.6392/72 |
| 41 | 50 mm dia C.I. Air Release Valve (Single Action) confirming to IS 14845 (SI)with all assericies such as Shaddle,pipe etc. |
| 42 | Rigid UPVC pipe of 200 mm diaIvory grey in colour having specific gravity of 1.4 to 1.46 Gm / CC ofstraightlength of 6 M for portable water supplies confirming to IS 4985 / 2000 of BIS - Amendment - 2 Read with Table - I , of IS specification bearing ISI Mark for working presure of 2.5Kgf/Cm2 as per latest amendment of ISI 4985 including cost of coupler for plain ended pipes or one end plain & other bell ended. The pipe should be tested by CIPET & each pipe should be clearly & indebile marked ink or Stenciled conforming to IS 4985/2000including transportationand laying at site all complete. (The Rate inclusive of CIPET Testing Charges) |
| 43 | 200 mm dia PVC End Cap(6Kgf/Cm2) |
| 44 | 200 x160mm dia PVCR/S(6Kgf/Cm2) |
| 45 | 200 x200x160mm dia PVC Tee (6Kgf/Cm2) |
| 46 | Rigid UPVC pipe of 160 mm diaIvory grey in colour having specific gravity of 1.4 to 1.46 Gm / CC ofstraightlength of 6 M for portable water supplies confirming to IS 4985 / 2000 of BIS - Amendment - 2 Read with Table - I , of IS specification bearing ISI Mark for working presure of 2.5 Kgf/Cm2 as per latest amendment of ISI 4985 including cost of coupler for plain ended pipes or one end plain & other bell ended. The pipe should be tested by CIPET & each pipe should be clearly & indebile marked ink or Stenciled conforming to IS 4985/2000including transportationand laying at site all complete. (The Rate inclusive of CIPET Testing Charges) |
| 47 | 160 mm dia PVC End Cap(6Kgf/Cm2) |
| 48 | 160 mm dia PVCEqualTee(6Kgf/Cm2) |
| 49 | 200X200X100mm dia M.S outlet Tee made with 202mm ID and 218mm OD M.S Pipe of 8mm thick 400mm long fitted with 1 mtr long 100mm dia M.S.Pipe welded with 2 nos of 100mm dia M.S.Flange in between the 1 mtr M.S.Pipe and 0.25 mtr long 100 mm dia M.S.Pipe fitted horizentally with 2 mtrs of 100mm dia M.S.Elbow with water locking arrangement made out of 1 no. of 100mm dia open flange and 1 no. of 100mm dia blind flange and with hingesgaskets arrangement that UPVC pipe should be inserted directly 100mm long inside the151mm dia ID M.S.Pipe at the both ends painted with two coats of anti corosive paints in complete set. |
| 50 | 150X150X100mm dia M.S outlet Tee made with 151mm ID and 166mm OD M.S Pipe of 8mm thick 400mm long fitted with 1 mtr long 100mm dia M.S.Pipe welded with 2 nos of 100mm dia M.S.Flange in between the 1 mtr M.S.Pipe and 0.25 mtr long 100 mm dia M.S.Pipe fitted horizentally with 2 mtrs of 100mm dia M.S.Elbow with water locking arrangement made out of 1 no. of 100mm dia open flange and 1 no. of 100mm dia blind flange and with hingesgaskets arrangement that UPVC pipe should be inserted directly 100mm long inside the151mm dia ID M.S.Pipe at the both ends painted with two coats of anti corosive paints in complete set. |
| 51 | Providing a T&P kit to the resistered PanipanchayathavingHand Gloves,DE Spanner,Ring Wrench,Sly Wrench , Screw Driver,Tester etc. Complete as directed by Engineer in site Charge |
| 52 | Schedule B (Electrical Works) |
| 53 | Upgradation of DTR fromof 11 /0.4 KV ,63 KVA to 100KVA plinth mounted Substationwith BIS Energy Level-II transformer confirming to RE Rules 1956, L.T distribution box with MCCB , Aluminium Busbar of single Bay with kitkat fuse for 63KVA S/Sincluding cost of 100KVA 11/0.4 K.V.Transformer , 55 Sqmm AAA conductor for jumpering , 3.5Core x 120mm² LT PVC Cable - 15 mtr couping & padding of Poles, Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets etc., including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. |
| 54 | Construction of 3 phase 4 wire Line using 8mtr long 200 kgPSC Poles with LT XLPE AB Cable of (3X35 mmSq.+ 1X25mm sq.) along with all required materials and concreting of stay/poles LT Dead end clamp, suspension clamp with I - hook, stay accessories such as Wire Insulators, clamp etc.to completepower supply as per the field condition (40m Span length) |
| 55 | Earthing installation with required earthing materials like charcoal, common salt, conduit pipe, soft solder alcaps ,nuts & bolts, cable socket etc. including excavationof earth pits2 Nos of size 1200mm X1200mm X 3000mm for fixing of earthing pipe2 Nos of size 30mm dia X 3000 mm length with required slotting in pipes & fittings with 30 mm dia G.I.Flange etc. includidng excavation of earthing trench for laying of earthing G.I.Wire & filling the Trench Pits after fixing of pipes on completion on earthing work and pannel wiring with required4mm²/2.5mm²PVC coper wire including supply & transportation of materials to work site as per the direction of site Engineer in-charge. |
AI Tender Summary
Tender Timeline
May 29, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
May 31, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender