Public Works Department-PWD has published Tender For Electrification Of Capacity Building For Engineer Of Ut Ladakh ( G 1St, 2Nd ) Floor.. Submission Date for this Tender is 02-06-2023. Electrification Work Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 1.5Sq.mm+ 1 x 1.5Sq.mm earth wire |
| 4 | 2 x 2.5 Sq.mm + 1 x 2.5Sq.mm earth wire |
| 5 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 6 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 7 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 8 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.1 x 1.5 sq. mm |
| 9 | 1 x 2.5 sq. mm |
| 10 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch |
| 11 | 3 pin 5/6 A socket outlet |
| 12 | Telephone socket outlet |
| 13 | TV antenna socket outlet |
| 14 | Bell push |
| 15 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 16 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 17 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 18 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 19 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door |
| 20 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6/16 amp |
| 21 | Supply, installation, testing and commissioning GI Electrode Earthing with 84 mm dia & 3meter length, with 3mm thick the electrode should be hot dip galvinised. The GI electrode shall be pre filled with cristaline conductive Material (CCM) the GI electrode shall be sourrounded with BEE MOIST compound to provide mazimum contact bwtween the electrode and compound should be eco -frindly GI Earthing should be maintainace free and does not require regular manual addition maintinace free and does not require regular manul addition of water. The earthing pit should be covered with PVC cover. |
| 22 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 23 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 24 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250 A, 35 KA,TPMCCB |
| 25 | On load change over switch 200 Amp |
| 26 | Fabrication , supplying , installation testing and commissioning of following pannel made out of 2mm thick M.S sheet , floor mounted, vermin & dust proof , indoors , duly painted with provision for fixing of 1 Nos including supply and fixing 2 set of Aluminium bus bar and strip for housing MCB"s , 24 Nos , MF Digital Meter and other allied accessories as required ( Make as per annexure ) |
| 27 | Supplying and fixing of following rating 240 / 415 Volt " C" series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection , testing and commissioning . ( Above to 32 Amp) SPN 63 Amp |
| 28 | TPN 63 Amp |
| 29 | Suppluing and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE at power cable of following sizes on surface / surface cables tray , 0.5 mtr below ground level etc. as required including carriage upto site of work ( Make as per annexure enclosed ) 50 Sqmm 3.5 Core Armoured |
| 30 | 150 Sq.mm Core Armoured |
| 31 | Supplying and fixing of 120 watt LED Street Light complete with G.I pipe bracket duly embeded along the parapet / wall . Wipro LR02 - XXX- 57 - G2 or equivalent approved make. |
| 32 | Supplying & fixing following luminaries as required LL20 - 111 - XXX - 65NE3 wipro 10 watt LED tube light fitting equivalent make and model philips / cromption Greaves. |
| 33 | 20 watt LED tube light fitting LL20- 221 - XXX -65NE3 of wipro or equivalent make and model philips / Crompton greaves . |
| 34 | Supplying , installation testing and commissioning of LED 2"x2" recess mounted fixture that delivers atleast 300 lumens and wattage not more than 36 watt. The luminaries shall have a CRC a power coated body and a high efficency diffuser . WIPRO CRCO10 RO 38 HP 57 GL or equivalent approved make. |
| 35 | Supplying and fixing of following electrical items suitabel for eperating on 240 / 230 volts AC , 50 HZ supply , including connection etc. as required . Exhaust fan 300 mm size ( Heavy duty ) CG transair or equivalent approved make . |
| 36 | 250 mm Shutter type |
| 37 | Supplying and fixing of Musical Bell including making complete connections etc as required ( Make as per annexure ) |
| 38 | Supply and fixing LED type down lighter 15 watt |
| 39 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable |
| 40 | 2 run of cable |
| 41 | 3 run of cable |
| 42 | Supplying and fixing items as required 1) Single phase plate with back and jack cat 6 D - Link Make |
| 43 | Dual phase plate with back box and jack cat 6 D Link |
| 44 | RJ connector works ( 100 port ) D link make |
| 45 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 pair |
| 46 | 4 pair |
| 47 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
