|
| 1 | Supplying of XLPE insulated and PVC sheathed cable of 1.1KV grade(as per IS 7088) Aluminium armoured underground cable confirming to IS 7088 (part I)1888 with upto date amendments of the following size at the site of work etc., as required |
| 2 | 2 x 10.0 Sqmm |
| 3 | 4 x 16.0 Sqmm |
| 4 | 3 x 6.0 Sqmm |
| 5 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 6 | Upto 35 sq. mm |
| 7 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 8 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 9 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required |
| 10 | 50 mm dia |
| 11 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 12 | Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. |
| 13 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 14 | Upto 35 sq. mm |
| 15 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 16 | 2 X 10 sq. mm (19mm) |
| 17 | 4 X 16 sq. mm (28mm) |
| 18 | 3 X 10 sq. mm (22mm) |
| 19 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 20 | 4 way , Double door |
| 21 | 8 way , Double door |
| 22 | 12 way , Double door |
| 23 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 24 | 4 way (4 + 12), Double door |
| 25 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 26 | Single pole |
| 27 | Single pole and Neutral |
| 28 | Triple pole and Neutral |
| 29 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and makinggood the same in case of recessed conduit as required. |
| 30 | 20mm |
| 31 | 25mm |
| 32 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. |
| 33 | 3 x 1.5 sq. mm |
| 34 | 4 x 1.5 sq. mm |
| 35 | 5 x 1.5 sq. mm |
| 36 | 6 x 1.5 sq. mm |
| 37 | 7 x 1.5 sq. mm |
| 38 | 8 x 1.5 sq. mm |
| 39 | 3 x 2.5 sq. mm |
| 40 | 6 x 2.5 sq. mm |
| 41 | 3 x 4 sq. mm |
| 42 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 43 | Group C |
| 44 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 45 | Group C |
| 46 | Supplying, installation, testing andcommissioning of 4 feet industrial box type luminaire suitable for single T8 LED tube with single side connection and fixing on wall/truss by using necessary clamps etc., as required. |
| 47 | Supplying, installation, testing and commissioning of Two numbers 1200 mm 20W LED T8 tubelight with PC body (single side connection) with efficacy of 100 lumens/W along with Industrial batten suitable for twin T8 LED tube and fixing on wall/truss by using necessary clamps and also dismantling the existing fitting without damage at site of work etc., as required. (as per ISO/IEC Specification) |
| 48 | Supplying, installation, Testing and commissioning of 70 watt Well Glass with Environmental friendly, energy saving long life corrosion resistant, vertical/horizontal surface mounting pressure die-cast aluminium housing well glass luminaires with high power LED as light source and fixing on truss /wall/ pole with suitable conduit, clamps and nut bolts including giving connection testing and dismantling the existing fitting without damage etc., at site of work as required (as per ISO/IEC Specification) (Rating IP66, Luminar efficacy > 100Lm/W, CRI>75) |
| 49 | Supplying and fixing of suiltable size MS Angle brackets (225mm x 225mm) on wall as directed by engineer in charge and giving connection at site of work as per etc., as required. |
| 50 | Supplying, installation, Testing and commissioning of 40 Watt LED type Well Glass Light in pressure die-cast aluminium housing and fixing on truss/wall/angle bracket with suitable clamps, nut and bolts including connection, testing and dismantling the existing fitting without damage etc., as required. (as per ISO/IEC Specification)(Rating IP66, Luminar efficacy > 100Lm/W, CRI>75) |
| 51 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 52 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 53 | Supplying and fixing of 32 mm dia X 1.00 meter long G.I. pipe (medium class) bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 54 | Supplying and fixing street light loop in loop out boxes with PVC Sintex Box of size 140mmx140mmx95mm with PVC enclosure 1 Nos. 6A SP MCB, 2/4 way strip connector i/c testing as reqd. |
| 55 | Supplying, installation, Testing and Commissioning of 45W LED Street light fitting including Inbuilt electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS comply with inbuilt surge protection device and fixing on wall/truss/pole with suitable clamps and nut bolts and other accessories including giving connection at site of work etc., as required. |
| 56 | Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. |
| 57 | 1 output per phase and suitable for single phase supply |
| 58 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 59 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 60 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required |
| 61 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. |
| 62 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 63 | 5/6 amps switch |
| 64 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 65 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 66 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 67 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 68 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 69 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
| 70 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 71 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 72 | Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. |
| 73 | Supplying one set of Rubber gloves for hands for attending the Electrical maintenance works at site as required conforming to relevant ISI specification (suitable for electrical application) |
| 74 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 75 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 76 | One or more coats on old work |
| 77 | CREDIT ITEMS :- |
| 78 | Dismantled metal scrap |
| 79 | Dismantled Box type batten |
| 80 | Dismantled DBs, switch gears with its accessories |
| 81 | Dismantled Aluminium insulated wire |
