Border Security Force-BSF has published Tender For Construction Of Separate Bathing And Toilet Facilities At Bops And At Op Point For Mahila Paraharis Sh C_O Toilet And Baths Cabin At Bops Singichera Paharmura Stainle Jai Katlamura And Tarapur Bops In Aor Of 80 Bn Bsf Under Shq Bsf Teliam. Submission Date for this Tender is 08-06-2023. Toilet Bathroom Tenders in teliamura Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earthworkinexcavationbymechanicalmeans(Hydraulicexcavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 2 | Fillingavailableexcavatedearth (excludingrock)intrenches,plinth.sidesof foundationsetc.inlayersnotexceeding 20cmindepth,consolidatingeach deposited layer by ramming and watering, lead up to 50 m and for all lift |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes |
| 10 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 11 | 12 mm cement plaster: 1:6 (1 cement : 6 fine sand) |
| 12 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars |
| 16 | Providing & Fixing of 0.50 HP, 230 volt, 50 hz,Single phase Mono Block Pump (Sub type-Self priming monoblock) , Suction and delivery pipe size 25x25 mm dia,2880 RPMwith connection of make LUBI / CG/ Kirloskar/KSB/CG etc as reuired. |
| 17 | Providing & Fixing of 0.75 HP, 230 volt, 50 hz,Direct Online starter with making connection of make LUBI / CG/ Kirloskar/KSB/CG/Havellsetc as reuired. |
| 18 | Supplying of 3 x 1.5 sqmm PVC insulated and FR PVC round sheathed copper conductor Make - Havells/Polycab/KEI/RR cable /finolex |
| 19 | Supplying & Installation of 01 seater portable bath cabin 915 mm x 915 mm x 1980 mmincludingover head tank (capacity 200 ltr), 01 nos ventilator size 650 x 400 mm, flat roof with 50 mm projection on all the four sides, installation and commissioning , plumbing and sanitary fitting connection. Bottom frame material 35 mm x35 mm x 5 mm thick M S angle, bottom frame support material 25 x25 x3 mm thick M S angle, side panel frame material 35 mm x35 mm x5 mm thick M Sangle, Top (roof frame material 25 mm x25 mm x 2 mm thick M S angle, top roof support frame 25 mm x25 mm x 3 mm thick M S angle, ventilation frame material 25 mm x 3 mm thick M S flat, door frame material 35 mm x35 mm x 5 mm thick M S angle, support material for door panel fixing SS U-chanel of 18 gauge, 02 nos door hinges 75 mm size with 1.2 -1.5 mm thickness, tank holder frame25 mm x 3 mm thick M S flat, unit under structure supported by 04 legs of size 35 mm x35 mm x 5 mm thick M S angle with corner support of25 mm x25 mm x 3 mm thick M S angle and door Tee material 40 mm x 40 mm x5 mm thick MS Tee. Side panel material single layer 3 mm thick FRP, Top (roof) panel material 5 mm thick ply core sandwich with 01 mm thick FRP from both sides, door panel material single layer 3 mm thick FRP, floor material 5 mm thick 5 mm thick FRP. 100 mm size MS door locking bolt, 75 mm size SS tower bolt, PVC over head tank, PTMT tower rail, plastic cloth hook, PTMT soap dish, PTMT bib cock, 01 nos LEDbulb holder complete including transportation loadind, unloading etc as per direction of Engineer-in-charge. |
| 20 | Supplying & Installation of 01 seater portable toilet 915 mm x 915 mm x 1980 mmincluding indian with ceremic WC, over head tank (capacity 200 ltr), ceremic wash basin with complete fitting, sludge tank (capacity 200 ltr) with 75 mm outlet facility through butterfly valve and hoise pipe, 01 nos ventilator size 650 x 400 mm, flat roof with 50 mm projection on all the four sides, installation and commissioning , plumbing and sanitary fitting connection, and waste extraction fittings. Bottom frame material 35 mm x35 mm x 5 mm thick M S angle, bottom frame support material 25 x25 x3 mm thick M S angle, side panel frame material 35 mm x35 mm x5 mm thick M Sangle, Top (roof frame material 25 mm x25 mm x 2 mm thick M S angle, top roof support frame 25 mm x25 mm x 3 mm thick M S angle, ventilation frame material 25 mm x 3 mm thick M S flat, door frame material 35 mm x35 mm x 5 mm thick M S angle, support material for door panel fixing SS U-chanel of 18 gauge, 02 nos door hinges 75 mm size with 1.2 -1.5 mm thickness, tank holder frame25 mm x 3 mm thick M S flat, unit under structure supported by 04 legs of size 35 mm x35 mm x 5 mm thick M S angle with corner support of25 mm x25 mm x 3 mm thick M S angle and door Tee material 40 mm x 40 mm x5 mm thick MS Tee. Side panel material single layer 3 mm thick FRP, Top (roof) panel material 5 mm thick ply core sandwich with 01 mm thick FRP from both sides, door panel material single layer 3 mm thick FRP, floor material 5 mm thick 5 mm thick FRP. 100 mm size MS door locking bolt, 75 mm size SS tower bolt, PVC over head tank, PTMT tower rail, plastic cloth hook, looking mirror plastic frame 455 mm x 305 mm, PTMT soap dish, PTMT bib cock, provision of vent pipe from sludge tank, 01 nos LEDbulb holder complete including transportation loadind, unloading etc as per direction of Engineer-in-charge. |
| 21 | Supplying & Installation of 02 seater portable toilet 915 mm x 915 mm x 1980 mmincluding indian with ceremic WC, over head tank (capacity 200 ltr), ceremic wash basin with complete fitting, sludge tank (capacity 200 ltr) with 75 mm outlet facility through butterfly valve and hoise pipe, 01 nos ventilator size 650 x 400 mm, flat roof with 50 mm projection on all the four sides, installation and commissioning , plumbing and sanitary fitting connection, and waste extraction fittings. Bottom frame material 35 mm x35 mm x 5 mm thick M S angle, bottom frame support material 25 x25 x3 mm thick M S angle, side panel frame material 35 mm x35 mm x5 mm thick M Sangle, Top (roof frame material 25 mm x25 mm x 2 mm thick M S angle, top roof support frame 25 mm x25 mm x 3 mm thick M S angle, ventilation frame material 25 mm x 3 mm thick M S flat, door frame material 35 mm x35 mm x 5 mm thick M S angle, support material for door panel fixing SS U-chanel of 18 gauge, 02 nos door hinges 75 mm size with 1.2 -1.5 mm thickness, tank holder frame25 mm x 3 mm thick M S flat, unit under structure supported by 04 legs of size 35 mm x35 mm x 5 mm thick M S angle with corner support of25 mm x25 mm x 3 mm thick M S angle and door Tee material 40 mm x 40 mm x5 mm thick MS Tee. Side panel material single layer 3 mm thick FRP, Top (roof) panel material 5 mm thick ply core sandwich with 01 mm thick FRP from both sides, door panel material single layer 3 mm thick FRP, floor material 5 mm thick 5 mm thick FRP. 100 mm size MS door locking bolt, 75 mm size SS tower bolt, PVC over head tank, PTMT tower rail, plastic cloth hook, looking mirror plastic frame 455 mm x 305 mm, PTMT soap dish, PTMT bib cock, provision of vent pipe from sludge tank, 01 nos LEDbulb holder complete including transportation loadind, unloading etc as per direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
