Tender For Installation Of Submersible Pump At Chanchal College At Chanchal G.P. Under Chanchal-I Dev. Block, Malda.
Tender Value
4.85 Lakhs
Estimated cost
Bid Submission
30 May 2023
0 days left
EMD
9720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chanchal → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Submersible Pump At Chanchal College At Chanchal G.P. Under Chanchal-I Dev. Block, Malda.
BOQ
| Sl. No. | Item Description |
| 1 | Labour for boring tube will of required dia by water jet System through any type of soil strata including hire & labour charges for boring pipe , scaffolding , tools & plants as necessary and taking out them and lowering pipes ,strainers , blind pipe etc. & filling and fixing the same complete including bucket washing and other incidental works in this connection . The Tube Well should have an maximum 50 mm. gap in between the out side of the tube well and the bore.i) 100 mm.dia boring |
| 2 | ii) 50 mm. dia boring |
| 3 | Supply of PVC pipes and fitting schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per ISa) 100 mm dia |
| 4 | b) 50 mm dia |
| 5 | c) 40 mm dia |
| 6 | Supplying of high density polythine strainer of approved make conforming to IS specification.50 mm dia. [Ref: Sanitary & Plumbing works ,P-48,i-5.i] |
| 7 | S/F/F steel cutter piece upto 450 mm long with socket 50 mm dia |
| 8 | supplying and installation of K.S.B. sub-mersible pump including connecting cable panel etc all completei) 1.50 H.P.capacity(Single Phase) |
| 9 | Supplying, fitting and fixing PVC insulated & sheathed felxible three core flat area 2.5 mm sqm as per stranded & bunched type A of IS 5831/1984 & Sheathing to IS 8130/1984 for higher flexibility are used to connect underwater as per STI type of IS 5831/1984 |
| 10 | Supplying, fitting and fixing single phasing voltage sensing preventer & auto start unit submersible pump control panel (1/2 H.P. to 2.0 H.P. range) of L & T brand of an influential electronic circuit which keeps three stage worked electrical machines from single stage cut off, stage succession inversion and lopsided voltage |
| 11 | Supplying, fitting and fixing GI cap at top. 100 mm.[Ref: Sanitary & Plumbing works ,P-51,i-17] |
| 12 | Supplying, fitting and fixing check valve(vertical) G.M. tested to 21 K.G per sq cm.b) 40 mm dia |
| 13 | Supply of PVC pipes and fitting schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per ISa) 100 mm dia |
| 14 | Washing and developing tubewell with air compressor pump and engine for 8 hours continuos pumping per day with necessary arrangements for testing the yield in gallons per hour with V-notch including hire and labour charged=s for all tools and plants and scaffolding as required complete in all respect |
| 15 | Packing the annular space between the outside of the tubewell pepes and strainers and bore with pea size washed gravels of approved quality having size from 2 mm. to 5 mm. the size approved by E.I.C. including cost of materials labours & equipment complete. |
| 16 | Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m. |
| 17 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge. |
| 18 | Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete.In 6:3:1 proportion. |
| 19 | Ordinary cement concrete with graded stone chips excluding shuttering & reinforcement, if any as per IS 456-2000. Using stone materials of Rajmahal variety |
| 20 | Reinforcement for reinforced concretework in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor / Mild Steel. |
| 21 | Hire and labour charges for shuttering with centering and necessary staging |
| 22 | 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer in charge |
| 23 | 125 mm thickbrick work with 1st class brick in cementMortar(4:1) in ground floor |
| 24 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars ofwindows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor). (i)Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 25 | Plaster ( to wall, floor , ceiling etc. ) with sand cement mortar including Rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including threading nosing and drip Course where necessary. |
| 26 | 15 mm thick plaster in sand cement mortar(1:6) |
| 27 | Neet cement punning on wall, dado |
| 28 | Artificial stone in floor, dado, satir case etc with cement concrete with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off comers and including application of cement slurrybefore floring works using cement @ 1.75kg per Sqm all complete including all materialss labour 3 mm thick toping |
| 29 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m. (i) Coloured decorative. |
| 30 | Supplying PVC water storage tank of approved quality with closed top with lid (black)-Multilayera) 2500 ltr capacity |
| 31 | Labour for hoisting plastic water storage tank |
| 32 | Labour for punching hole in PVC water storage tank upto 50 mm dia |
| 33 | Cast iron down pipes of approved quality in position with necessary clamps, nails including making holes in the wall, floor etc and cutting trenches etc. In any floor through masonary concrete, if necessary and mending good damages with necessary jointing materials apainting two coats to the exposed surface with approved paint complete with valamoid joints including sealing with sand cement mortar (4:1) 100 mm dia(internal) |
| 34 | Supply fitting fixing cast iron specials of down pipes in position with clamps, nails etc with joining materials including cutting holes in masonary or concrete, mending good damages complete100 mm dia |
| 35 | C.I. shoe of down pipe100 mm dia |
| 36 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) a) 15 mm dia |
| 37 | 20 mm dia |
| 38 | 25 mm dia |
| 39 | 40 mm dia |
| 40 | Supplying fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg. per Sqm(For water line or40 mm dia |
| 41 | 25 mm dia |
| 42 | 20 mm dia |
| 43 | Supplying, fitting and fixing Chromium Plated Bib Cock short bodyi) 15 mm |
| 44 | Supplying fitting and fixing painter 1/6 HP mini compressor, AS182 of 1450-1700 rpm speed including necessary cable & fitting etc. all complete/single phase |
| 45 | Supplying, fitting and fixing Cylindrical Oxidation Chamber of M.S. type for Iron removal Filter of shell thickness 5 mm , of capacity greater than 1000 litre per hour & rate of Flow is 10 cum per hour etc. all complete. |
| 46 | Supplying FRP vessel made up of high performance resin and having polythelene inner shell and fiberglass with with eopxy resin outer shell of capacity 49 gallon & volume 185 litre. It has outstanding performance and durability no chance of any leakage & corrosion resistant product of one year warranty etc. all complete |
| 47 | Supplying UPVC Riser pipe of standard quality of size 25 mm to 125 mm dia of 3 metre to meter in length & white in colour etc. all concept |
| 48 | Supplying 25 NB Multi Port valve (MPV) for resin water softener for any brand etc. all complete |
| 49 | Supplying Bypass Filter system Microfiber polyester Micron Filter, Length: 5\"-10\", Diameter:1\"-2\" blue in colour |
| 50 | Filling of filter media like Gravels , Silica Sand , Charged Media , Silika Carbon and Anthracite into the Cylindrical type Multigrade Filter in proper order with required quantity as per instruction of Engineer in charge.A ) with pea size washedgravels of approved quality having size from 2 mm. to 5 mm. |
| 51 | B ) Sand( Coarse )………………… |
| 52 | c) Sand(Treated) |
| 53 | d) Water clinic granulated activated carbon for water purification and air purification/Pure activated charcoal Rocks/Eliminate Tank Odours/Remove Harmful Bacteria |
| 54 | e) MNO2 |
| 55 | Labour charges for fitting and fixing raw water line through air Compressor , Oxidation Chamber Multigrade Filter& Chlorine dozing System with required UPVC pipe of necessary dia including all necessary accessories , specials viz ,socket , bend , tee , union , cross , elbo , nipple , long screw , reducing socket , reducing tee, short piece etc.fitted with holder but clapms including cutting pipes making threads , fitting ,fixing & filling media into Multigrade filter in required quantiuty with proper order including one year free & smooth servicing & warantee of whole Treatment Plantetc.complete. |
| 56 | Priming one coat on timber, plastered with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 57 | Priming one coat on steel or other metal surface with super gloss(Hi gloss) two coats (with any shade except white) |
| 58 | Painting with best quality Synthetic Enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc on the surface if necessary.A ) On Steel Surface |
| 59 | A ) On steel or other metal surface: with Super Gloss (Hi-gloss), Two coats (with any shade except white). |
| 60 | Providing and erecting direction and place identificationretro-reflectorisedsignasperIRC:67 made ofhighintensitygradesheetingvideclause 801.3, fixed over aluminium sheeting,2 mm thick with area notexceeding0.9sqmsupportedonamild steel single angle iron post 75 x 75 x 6 mm firmly fixed to thegroundbymeansofproperlydesigned foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).. |
| 61 | Sub Total |
| 62 | GST 18% |
| 63 | CESS 1% |
AI Tender Summary
Tender Timeline
May 23, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender