|
| 1 | M & L for cleaning of water storage sump of capacity 5000 gallons (at UWR, 24 Lt\"s Qtrs and 203 pump house - 02 Nos.) any staging depth including writing date of cleaning on wall of under ground sump with synthetic enamel paint. Brooming / scraping down of old surface and removal of dirt, sludge from the walls and floors of UG sump, scrapping of old rusted surface of pipeline and painting with one coat of red oxide and applying two coat of synthetic enamel paint after cleaning of steel surface of pipes complete all as specified and directed comprising of pre operations mentioned below:-(a) In the first step mechanized dewatering of the sump shall be carried out by opening drain out valve/pump. (b) In the second step, removal of left over dirty water and sludge with suitable sludge removal pump shall be carried out.(c) In the third step,cleaning of internal walls and floors of underground sump shall be carried out by high jet pressuremachine and bleaching powder, and ensured that no dirt, sludge or moss remain on surface of the sump. (d) In the fourth step,the remaining sludge shall be removed from the floor with the help of industrial vaccum cleaner. |
| 2 | All as per serial item No.1 here-in-before but capacity 9,000 gallons (at UWR and DAD complex) |
| 3 | All as per serial item No.1 here-in-before but capacity 10,000 gallons (at Def Civ pump house) |
| 4 | All as per serial item No.1 here-in-before but capacity 33,000 gallons (at New Leading P/H/Acharya PH) |
| 5 | All as per serial item No.1 here-in-before but capacity 50,000 gallons (at BMF P/H, Mangor P/H, New Varunapuri P/H, Nofra P/H, 404 P/H, Trishul PH/Raksha PH, MAP Ph II) |
| 6 | All as per serial item No.1 here-in-before but capacity 1,50,000 gallons (at Nofra-2, BMF P/H-01) |
| 7 | All as per serial item No.1 here-in-before but capacity 4,50,000 gallons (at Nofra) |
| 8 | M & L for disconnecting and stopping of incoming and outgoing pipes by means of hesian cloth to avoid choking of distribution pipe lines, removing complete water from the over head tank cleaning of over head tanks upto 18 mtr staging (Height of OH Tank) of capacity 1,00,000 gallons (at Varunapuri P/H & BMF P/H - 01 No each) including writing (date of cleaning, capacity of tank etc) on over head tank pillar with synthetic enamel paint, scrapping of old rusted surface of pipeline (Rising Main, Distribution and Wash out) and painting with one coat of red oxide and applying two coat of synthetic enamel paint (Black, Red and Blue colour) after cleaning of steel surface of pipes complete all as specified and directed comprising of pre operations mentioned below:-(a) In the first step dewatering of the tank shall be carried out by opening drain out valve.(b) In the second step, removal of left over dirty water and sludge with suitable sludge removal pump.(c) In the third step,cleaning of internal walls and floors of overhead tank shall be carried out by using high jet pressure machine and bleaching powder, and ensured that no dirt, sludge or mass remain on surface of the OH tank.(d) In the fourth step, the remaining sludge shall be removed from the floor with the help of industrial vaccum cleaner. |
| 9 | All as per serial item No. 8 here in before but over head water tank upto 18 mtr of staging (Height of OH Tank) of capacity 75,000 gallons (at BMF P/H) |
| 10 | All as per serial item No.8 here in before above but over head water tank upto 18 mtr of staging (Height of OH Tank) of capacity 50,000 gallons (at Nofra, BMF P/H and New Leading Qtr \"s) |
| 11 | All as per serial item No.8 here in before above but over head water tank upto 18 mtr of staging (Height of OH Tank) of capacity 20,000 gallons (at Mangoor P/H) |
| 12 | All as per serial item No.8 here in before above but over head water tank upto 18 mtr of staging (Height of OH Tank) of capacity 5,000 gallons (NAY (G) parade ground) |
| 13 | Desluding/dewatering of under ground sewage sump 1 lakh litres capacity at Varunapuri gate - sewage pump house,by sewage disposal vehicleuptoApprox. depth 15 Mtrs from ground level complete, including working under foul condition and taking out sludge, mud, garbage, cloth pieces and any impurities of any thickness complete from the bottom of the sump or solid waste (silt) in any proportion and silted soil from the existing underground sewage sump. Rremoving the sludge to a distance not exceeding 2.0 Km in a vaccum tanker (sewage disposal vehicle) out side of MOD land and deposited the same where directed. Cleaning the surrounding wall with bleaching powder complete all as specified and as directed. |
| 14 | Note : (i) Sewage disposal vehicle should be equipped with a high pressure super sucker machine. (ii) Necessary Items such as suction pipe, clamps and other T&P related works should be provided by the contractor without any extra cost. (iii) Rates of painting of GI weld mesh provided on top of the sewage tank and MS channel support02 Nos are included in the unit quoted rates and not any claim entertained at later stage.(iv) Necessary measurement etc of person executing the work shall be produced before commencing the work.(v) All saftey gadgets including first aid shall be available at site of work during the execution of the item. |
| 15 | M&L for cutting and clearing of shrubs and bushes including surface dressing not exceeding 15cm deep in soft/loose soil including cutting and removal of unwanted grass hard/dense article/small trees and ramming and watering after leveling of surrounding area of pump house bldg inside of perimeter wall complete all as specified and as directed. |
| 16 | Excavation in trenches n.exc 1.5m wide & n.exc 1.5m in depth and getting out in hard / dense soilfor layingof soil complete all as specified and as directed. |
| 17 | All as per Item No.15 above but in soft disintegreted rock/ laterite rock. |
| 18 | Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata complete all as specified and as directed. |
| 19 | Removing excavated soil to a distance n.exc 50m, depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and as directed. |
| 20 | M & L for providing dry river sand as in sand cushioning for underground PVC cable protection including punning down sand in layers all as specified and as directed |
| 21 | Supply and lay reinforced precast concrete cable covers, class LV, type- I flat, size 250x150x40mm, all as specified and as directed. |
| 22 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and as directed. |
| 23 | M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) in foundation for concrete encasing the pipe/pole upto GL complete all as specified and as directed. |
| 24 | M&L for providing PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for plinth block/ collar above GL 450mm high and 450mm dia complete all as specified and as directed. |
| 25 | Supplying, laying, jointing& testing 2 core 10Sqmm, XLPE cable insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor including taking down existing cable complete all as specified and as directed.Note:Excavation & earth work, sand cushioning & PCC cable cover shall be measured & paid separately under respective item of BOQ. |
| 26 | S & F in repairPVC insulated & FR PVC roundsheathed copper conductor multi core round (flexible) industrial cable 1100 volt with bright annealed electrolytic bare copper conductor for voltage 1100 volts grade of size 2.5 sqmm,2 core confirming to IS-694-1990 from juction box to light fittings and locking arrangement complete all as specified and as directed. |
| 27 | Supply and lay GI tube light grade with all fittings and fixed to walls and ceilings or laid in floors or in road, trench of size50 mm dia including taking out old unserviceable pipe complete all as specified and as directed. |
| 28 | Supply and lay GI tube medium grade of size 50 mm dia for fixing Solar street light fittings including taking out old unserviceable pipe complete all as specified and as directed. |
| 29 | S&F in replacemet Decorative LED Post Top fitting for 360 degree indirect light of capacity 35W with IP- 65 protection, energy saving and resistant to impact and corrosion, glare free and better uniformity including taking down old unserviceable fittings complete all as specified and as directed. |
| 30 | S & F in repair junction box with MCB 6 Amps SPN & terminal block icluding clamp, nut & bolt connections complete all as specified and as directed. |
| 31 | S&F for sheet metal enclousre for MCB DB\"s SPN, 4 way, double door, 240 Volts with 200 Amp rated bus bars including connection of incoming/ outgoing cablethrough suitable size of lugs complete all as specified and as directed. |
| 32 | Supply and fixing MCB SPN 32 Amp, 240 volts 10 KA \"B\" series\" complete all as specified and as directed. |
| 33 | S&F new generation energy saving, long life aesthetically designed aluminium landscape efficient LED BollardIP 65 Protection for diffused lighting with high power 8 watt LED as light source complete all as specified and as directed. |
| 34 | M&L for painting of panel boardwith one coat of synthetic enamel paint including preparation of the existing surface by scratching of old paintwherever required, rubbing & cleaning of the greasy spotby means of kerosene oil or other suitable chemicalwith safety precautionincluding disconnection of all electrical connections andconnecting up complete on completion of painting work by taking suitable shut down complete all as specified and as directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 36 | S & F in repairs Framed work such as ladders, walk ways, railings & hand rail, shed and frame work for water supply installation and similar work including cutting tops to shape, drilling holes, notching for wire etc embedded in concrete / masonary complete duly painted with two coats of primier and one coat on synthetic enamel paint, drilling, bolting or reveting con-forming to Fe.290. Gde-E-165 including fixing it on required surface with necessary cement and welding work complete all as specified |
| 37 | S & F smart solar street light 50 W with built in mono crystalline panel, lithium ion battery, MPPT charge controller and PIR sensor with colour temperature 6000 to 6500Kalongwith connecting accessories like clamp, nut & bolts, etc complete all as speicifed and as directed. |
| 38 | M&L in repair LED aviation Light luminaires lighting comprising of aluminium housing with poly carbonate enclosure, 302 Nos LED and accessories complete all as specified and as directed. |
| 39 | Supply and fix in repairs to single pointed air termination rod (copper) 12 mm dia 300 mm long along with all mounting accessories on top of OH reservoir of different staging at pump house as per relevant IS provision. (All the joints shall be properly revitted and brazed/welded) |
| 40 | S & F in repair aluminium strip 25mmx 3mm burried in ground along column overhead reservoir on PVC shadles at 0.50 mtr apart up to the height of 30mtrcomplete all as specified and as directed. |
| 41 | S&F in repairPVC insulated & FR PVC roundsheathed copper conductor multi core round (flexible) industrial cable 1100 volt with brightannealed electrolytic bare copper conductor for voltage 1100 volts grade of size 1.5 sqmm, 02 core confirming to IS-694-1990making connection to water aviation obstruction light complete all as specified and as directed. |
| 42 | S&F in repair, connect & testLEDstreet light new generation energy saving & environmental friendly long life versatile pressure die- cast aluminium IP66 LED street light fitting 90 watts on existing street light pole, all as specified and as directed. |
| 43 | M & L for construction of brick masonary valve pit chamber of size 900 mm x900 mm x 900 mm (internal dimension) including necessary excavation and earthwork, PCC 1:4:8, brick work in cement motar 1:4, 12 mm thick rendering in cement mortar 1:4 on internal surface of valve pitand mild steelsheet cover 05mm thick andmild steelangle iron frame size 50mm x 50 mm x 06mm around of valve pit, locking arrangement with pad lock of size 50 mm brass, 6 leavers and key ( Make : Godrej) complete including twocoat of synthetic enamel overa coat red oxide primer on steel surfacewith preparation of surface and including dismantling of existing valve pit complete all as specified & directed. |
| 44 | Dismatling of old Sign boards and supply and fixing of new micro prisms retro reflective informatory sign boards of size as existing with single side writing ( Size of letters as per IRC 67) made of high intesity grade sheeting, fixed over aluminium sheet 3mm thick, supported on angle iron / GI pipes of existing size fixed in PCC 1:2:4 of size 0.6 x 0.6 x 0.6m including necessary excavation and earth work, welding and painting with two coats of synthetic enamel paint over a coat of primer complete fixing in hard rock soil all as directed. The rates quoted will be inclusive of all PCC work, excavation, removing of excavation, removing of excavated soil, iron/GI pipes etc. Size of letters:- 150mm x 75mm, |
| 45 | M&L Plate earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI strip 25x3.15mm any length as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, including provision of GI pipe 50 mm bore medium grade of required length for protection of earthing lead, GI watering pipe 20mm bore medium grade with GI sheet funnel and wire mesh, PCC 1:3:6, type B-1 chamber with 50 mm thick pre-cast RCC cover reinforced with 6 mm dia mild steel plain round bars spaced at 100 mm centres both ways with frame, filling the pit with charcoal & common salt surrounding the earth plate, including all necessary excavation & earth work in any type of soilall as shown in Electrical Plate No.3, connected to earthing test point including testing on completion complete all as specified & as directed |
