}

Tender For Construction Of Culvert At Ward No.4 Muslim Street And Chathiram Street, kangeyam-Tamil Nadu

Kangeyam Municipality-agecode007 has published Tender For Construction Of Culvert At Ward No.4 Muslim Street And Chathiram Street. Submission Date for this Tender is 16-06-2023. Culvert Tenders in kangeyam Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

37810020
Corrigendum : Tender For Construction Of Culvert At Ward No.4 Muslim Street And Chathiram Street
Open Tender
Indian
Tamil Nadu
kangeyam
16-06-2023

Tender Details

Construction Of Culvert At Ward No.4 Muslim Street And Chathiram Street

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 26-May-2023 EXTENTION OF DATE Date 31-05-2023
2 31-May-2023 DATE EXTENSION Date 02-06-2023
3 02-Jun-2023 EXTENSION DATE Date 09-06-2023
4 09-Jun-2023 DATE EXTENTED Date 16-06-2023

Key Value

Document Fees
INR 845 /-
EMD
INR 3000.0 /-
Tender Value
INR 3 Lakhs /-

BOQ Items

Name of Work: Construction of Culvert at Ward No.4 Muslim Street and Chathiram Street
Sl. No. Item Description
1Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification.
2Cement concrete 1:4:8 mix (One cement four crushed stone sand and eight aggregate) using 40 mm ISS metal including mixing, laying, consolidating curring cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
3Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footings, plinth beam, grade beam, stair case steps, bed blocks etc. which require only normal strutting using M.S. sheets of size 90cm x60cm BG 10 gauge of stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10 x 6.50cm spaced at about 90 cm centre to centre and supported by the casurina props of 10cm to 13cm dia spaced at 75cm centreto centre atsuitableintervals etc. complyingwithstandardspecification.
4a).Without Strutting
5b).With Strutting
6Plain cement concrete 1:2:4 mix (One cement two crushed stone sand and four aggregate) using 20 mm ISS metal including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
7Plastering with cement mortar 1:3 mix (One cement and three crushed stone sand ) to 20 mm thick mixing curring cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
8Providing and laying in Position, Standardised concrete mix M-20 Grade in accordance with IS :456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement concrete of 325 Kg/M3 and maximum water content ratio of 0.55, including admixture(Plasticiser / Super Plasticiser) in recommended Proportions as per IS :9103 to accelerate. retard setting of concrete, improve workability without preparing strength and durability with about (5 cu.m) 7730 Kg of 20mm machine crushed stone jelly and with about (3.30 cu.m) 5156 Kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 Kg of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also laying, vibrating with mechanical vibrators, finishing curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claming etc., complete complying with standard specifications and as directed by the departmental officers. The coarse and fine aggregates to be used should be comply with the requiremnts of IS standard.
9Supplying and fabrication placing in position of M.S. (or) RTS rods for required size and length as directed by the deparmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification
10Goods and Services Tax (18%)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail