Tender For Supply, Delivery And Fixing Of Motor And Water Supply Arrangements At Existing Borewell At W.13 Sathya Nagar
Tender Value
5 Lakhs
Estimated cost
Bid Submission
26 May 2023
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
845
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kangeyam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply, Delivery And Fixing Of Motor And Water Supply Arrangements At Existing Borewell At W.13 Sathya Nagar
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification. |
| 2 | Supplying and fixing of 5.0 HP Air Compressor with 3 phase 5HP Motor - 1440 RPM etc Complete. |
| 3 | Supplying and fixing 5000 litre HDPE water tank including cost and conveyance of tank and fixing in proper position etc complete as per std specification. |
| 4 | Supply of 40 mm dia flex hdpe hose 10 kg/cm2uitable for air compressure motor with water line including cost and conveyance of pipe to the site etc complete as per std specification. |
| 5 | Supply of 1/2 \" dia flex hdpe hose 10kg/cm2suitable for air compressure motor with water line including cost and conveyance of pipe to the site etc complete as per std specification. |
| 6 | Supplying fixing of 50 mm dia G.I pipe B class cut into 3m lengthand threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specification. |
| 7 | Supplying fixing of 40 mm dia G.I pipe B class cut into 3m lengthand threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specification |
| 8 | Supplying fixing of 20 mm dia G.I pipe B class cut into 3m lengthand threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specification. |
| 9 | Supplyingof 63 mm dia PVC 6 KSc pipe with ISI marked including transporting the same to the site directed by the departmental officers etc complete as standard specifications |
| 10 | Supplyingof 32 mm dia PVC 10 KSc pipe with ISI marked including transporting the same to the site directed by the departmental officers etc complete as standard specifications |
| 11 | Supplying and Delivery of Following Pvc Specials |
| 12 | 63mm dia Pvc Bend |
| 13 | 63mm dia Pvc MTA |
| 14 | 63mm x 40mm dia Pvc Reducer |
| 15 | 50mm dia PVC Compressor Foot Valve |
| 16 | 40mm dia PVC FTA |
| 17 | 63mm dia PVC FTA |
| 18 | 160mm dia PVC End cap |
| 19 | Supplying and Fixing of following GI specials |
| 20 | 50mm dia G.I Elbow |
| 21 | 50mm dia G.I Flange set with Bolt & Nut |
| 22 | 20mm dia M.S Union |
| 23 | 20mm dia GI Stop Cock |
| 24 | 40mm dia G.I Elbow |
| 25 | 40mm dia G.I Union |
| 26 | 40mm dia Hdpe hose Collar |
| 27 | 40mm dia Mild Steel Kitty |
| 28 | 25mm x 20mm dia G.I Reducer Coupling |
| 29 | 25mm dia G.I Pipe Nipple 6\" |
| 30 | 15mm dia G.I Coupling |
| 31 | 15mm dia G.I Elbow |
| 32 | 15mm dia Hdpe hose Collar |
| 33 | 50mm dia G.I Hex Nipple |
| 34 | 50mm x 25mm dia G.I Reducer Tee |
| 35 | 20mm x 15mm dia G.I Reducer |
| 36 | 50mm dia G.M Gate valve |
| 37 | Brick work in cement mortar 1:5 mix using(One cement and five crushed stone sand) using best quality of country second class ground moulded chamber burnt bricks of size (9\"x4 3/8\"x2 3/4\") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - |
| 38 | Randum rubble masonry in cement mortar 1:5 mix (One cement and five crushed stone sand) using best quality of new rough and bond stones including simultaneiously pointing curing, cost and conveyance of all materials to site and labour charges etc., complete as per standard specification |
| 39 | Manufacturing, supplying and fixing in position plain cement concrete precast slab 50 mm thick in Cement Concrete 1:1 1/2:3 (One cement one and halfcrushed stone sand and Threejelly) using 20 mm HBG stone jelly including cost of moulding charges, casting of slab finishing, curing,etc Complete |
| 40 | Cement concrete 1:4:8 mix (One cement four crushed stone sand and eight aggregate) using 40 mm ISS metal including mixing, laying, consolidating curring cost and conveyance of all materials to site and all labour charges etc., complete as per standard speicification |
| 41 | Lowering of 63 mm dia PVC rigid pipes and specials to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing.etc complete |
| 42 | Supply of DOL starter suitable for 5 hp air compressure motor with single phase preventor,Minature circuite ,1KVAR power capacitor and suitable wooden board with necessary connections etc complete |
| 43 | Supply and fixing of 32 amps Dp Switch of 500 v with metal clad with fuse and neutral etc Complete.as per std Specification |
| 44 | Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 nosx32 amps fuse unit (500 V) 32A neutral link and earth ( 1\" x 1/8 \" copper flat) on teak wod plank of size 600 mm x450 x 19mm with supporting Teak wood reeperetc complete (SD 127) |
| 45 | Supply and run of 4 of 4 sqmm (56/0.3) PVC insulated Single core unsheathed Cu.Conductor of 1100 v grade on 7/20 GI bearer wire for service connection mains |
| 46 | Supply and run of 4 of 4 sqmm (56/0.3) PVC insulated Single core unsheathed Cu.Conductor of 1100 v grade in 20 mm GI Pipe (Class \" B\") Bend at Both ents with necessary angle iron up right and Supports |
| 47 | Supply and fixing of 32 Amps fuse unit including all cost and Conveyance of materials and labour charges etc complete as per std specification |
| 48 | Supplying and fixing steel door double leaf made out of 18 gauge M.S. sheet outer frame 35 x 35 x 5 mm angle inner frame 25 x 25 x 5 mm angle cross stiffner M.S. flat 25 x 5 mm with aldrop tower bolts 2 nos. two handles and six holdfasts complete welded and revitted and one coat of red oxide painting including cost of all materials and labour etc., complete |
| 49 | Supplying fixing of 32 mm dia G.I pipe B class for Supporting to Service Main including all cost of Labor charges etc Complete |
| 50 | Refilling in basement with excavated earth in layers of not more than 15cm thick well rammed, watered and well consolidated etc. complete complying with standard specification. |
| 51 | Plastering with cement mortar 1:5 mix (One cement and five crushed stone sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
| 52 | Goods and Services Tax (18%) |
AI Tender Summary
Tender Timeline
May 23, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender