Tender For Replacement Of Pump Motor Set Of Different Li Scheme Under W.R Sub-Division No-I, Belonia ,Under B.C Nagar R.D Block Of South Tripura District During The Year 2023-2024/ Sh-Replacement And Installation Of 5 Nos Pump Motor Set And Other A
Tender Value
11.21 Lakhs
Estimated cost
Bid Submission
02 Jun 2023
0 days left
EMD
22423
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Replacement Of Pump Motor Set Of Different Li Scheme Under W.R Sub-Division No-I, Belonia , Under B.C Nagar R.D Block Of South Tripura District During The Year 2023-2024 / Sh-Replacement And Installation Of 5 Nos Pump Motor Set And Other Allied Works
BOQ
| Sl. No. | Item Description |
| 1 | Centrifugal Pump & Motor as per IS: 659560LPS with 22 m head25 HP Pump Motor |
| 2 | Dismentaling of old pump/motor from base & stacking of materials & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge. |
| 3 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:-Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 40 mm nominal size |
| 5 | Supplying & fitting fixing of GI . bend of approved quality |
| 6 | i) 125 mm dia |
| 7 | ii) 150 mm dia |
| 8 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality |
| 9 | i) 125 mm dia |
| 10 | ii) 150 mm dia |
| 11 | Providing & fitting fixing Rubber flange washer 6 mm thick at site ofwork of approved quality |
| 12 | i) 125 mm dia |
| 13 | ii) 150 mm dia |
| 14 | Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality. 150 mm dia |
| 15 | Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality.i) 150 mm dia |
| 16 | Providing & fitting fixing C.I tail piece of approved quality at site of work.i) 150 mm dia |
| 17 | Providing & fitting fixing C.I foot valve of heavy duty at site of work of approved quality.i) 150 mm dia |
| 18 | Providing & fixing GI equel tee with G.I Pipes line as required as per direction of Engineer-in-Charge.125 x125 x125 mm |
| 19 | Providing & fixing G.I. plug of approved quality.125 mm dia |
| 20 | Dismental of pannel board as per direction of the Engineer-in-charge. |
| 21 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the sameby 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.Size 1.20X1.20X0.025 mtr. |
| 22 | Labour charge for reinstallation of all electrical equipments (dismentalled serviceable materials, if any additional/ replacement of electrical eqiupments required will be paid separtely) on the pannel board including trial run for 10 hrs in two spell complete as per direction of the Engineer-in Charge |
| 23 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuse) triple pole with Neutral Link (TPN) , 415/500 Volt, complete as per direction of Engineer-in-Charge.Current range 63 Amps. |
| 24 | Providing & fitting fixing of Fully Automatic Star Delta type Motor startar ( 3ph, 50 Hz, 415V 25HP/18.7 kw Relay range within 17-25) in steel sheet enclosure with Conductor , Timer etc. complete suitable for motor pump Havells/L&T/BCH make as per direction of Engineerin-Charge. |
| 25 | Supplying and fitting fixing AC Voltmeter (Moving Iron) on the panel board of approved quality.PU4,Range 0-400 to 0-500 |
| 26 | Supplying and fitting fixing AC Ammeter (Moving Iron) on the panel board of approved quality.PU4,Range 0-10 A |
| 27 | Supplying & fitting fixing of 7/16 Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality. |
| 28 | Supplying and greasing/applying of grease in wheel bearing complete as per direction of Engineer-in-charge. |
| 29 | Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge. |
| 30 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-incharge. |
AI Tender Summary
Tender Timeline
May 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender