Military Engineer Services-MES has published Tender For Repair/Maint Of Dg Set, Amf Panels, Solar Water Heaters, Servo Voltage Stabilizer And Capacitor Bank At Zone A And Repair/Maint Of Dg Set, Solar Water Heater, Maint Of Stp Anarwala And Filtration Plant Under Age E/M-I Of Ge Dehradun.. Submission Date for this Tender is 19-06-2023. Voltage Stabiliser Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-06-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling existing pump set of 12.5/15 HP cap from existing old PCC platform for repair the PCCplatform including Material and labourfor cement concrete 1:2:4 type B1 using (20 mm graded stone aggregate) as in mass concrete (for pump set foundation etc) and provision for rerouting ofsuction line (approx 15 mtr length)including 1 no foot valve of suitable size and delivary line of 100mm dia MS pipe line (approx 03 mtr length) including all CI/DI/MS fittingsalongwith fiximg of 1 No new Sluice valve of 100 mm dia, 1 No NRV of 100mm dia complete all as specified and directed by Engr-in-Charge. Note:- After completion of this job contractor shall be responsible for testing and commissionig the rerouting suction and delivary line alongwith all connected fittings without any extra cost. |
| 2 | Dismantling existing pump set of 50 HP cap from existing old PCC platform for repair the PCCplatform including Material and labourfor cement concrete 1:2:4 type B1 using (20 mm graded stone aggregate) as in mass concrete (for pump set foundation etc) andrerouting ofsuction line of 150 mm dia MS pipe line (approx length 10 to 12 RM) including 1 no foot valve of suitable size and delivary line of 150mm dia MS pipe line including all CI/DI/MS fittingsalongwith fiximg of 1 No new Sluice valve of 150 mm dia and 1 No new NRV of 150mm dia complete all as specified and directed by Engr-in-Charge. Note:- After completion of this job contractor shall be responsible for testing and commissionig the rerouting suction and delivary line alongwith all connected fittings without any extra cost. |
| 3 | Sodium hypo chlorine liquid solution 9%complete all as specified and directed.Make: Hybrid laboratory /Mac India |
| 4 | Supply only Calcium Hypo Chlorite having65%-70% Chlorine Content (Calcium based granular disinfectant) for general water treatment & swimming pool water treatment, in factory sealed container/drum (45 kg packing), complete all as specified and directed. Make : Royalseema/ Declibac Calcium Hypochlorite detailed specifications : (a)Chemical analysis & physical observations : Description : Whitish granules Granular size (Mesh passing through - 100 BSS): 1.1(+ 0.1)% Water/moisture : < 5.00% Mercury & other Heavy Metal contaminants : BDL. (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water: Requirement must be 140-200 gm per one lakh liter of water to achieve 1 ppm Average at injection point (site & raw water quality variations may apply additionally). |
| 5 | Material and labourfor Cleaning of raw water tank appx size 24.5 x 7.8x5.5 Mtr (Cone shape) having two chambers (each chamberhaving two partitions) by taking out deposit silt/mud from inside of tank upto bottom surface including scraping deposit alge on inside wall and washing with lime water upto bottom, applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm completeall as specified and directed by Engineer-in-Charge. Location - Patia Pump House. |
| 6 | Supply of stablebleaching powder Grade – Iconforming to IS-1065/1989 (IInd Revision) as amended upto date having available chlorine contents minimum 34% by massand packed in 25 Kg polythene bag having double fold complete all as specified and directed by Engineer-in-Charge and as per following specifications:- Make: Grasim/Shriram Bleaching powder (Calcium Hypo Chloride), Chlorine formula : Ca (OCl)2 Molecular weight : 142.96, Physical Appearance : white fine powder, Chlorine content :- 30 % ± 1%, Moisture : 0.5 % Max On heating at 10 ± 2°C it dose not lose more than 1/15 of available chlorine Passing through 1.7mm sieve : 99% |
| 7 | Supply of Alum Ferric Sulphate (Grade-4) (best quality as per sample) for purification of water (containing lead (as PB) 30 ppm max and arsenic6ppm max) confirming to IS-299/2012 (Revised) as amended up-to-date complete all as specified and directed by Engineer-in-Charge. (Note:- The Alumino Ferric Sulphate shall be supplied in superior quality Bricks (Slabs) as per IS specifications. |
| 8 | Supply only lime of superior quality complete all as specified and directed. |
| 9 | Supply of Poly Aluminum Chloride AC-100S powder inorganic soluble polymer powder effective in both high and low turbidity for rapid and better floc formation with much lower dosing rates, less sludge rates, less sludge generation, less PH reduction in factory sealed container/ plastic bag of 25 Kg each, complete all as specified and directed. |
| 10 | Material and labourfor painting of different sizes connecting pipes Valve pit chamber covers, rolling shutters, MS pipe, pump set and its related items including writing letters on pump motors etc at various installations as per colour code with one coat of primer and two coat of synthetic enamelled paint all as specified and directed |
| 11 | Taking up or down PVC pipe from trenches including dismentling& removing for disposalfor the pipes of 160 mm bore complete all as specified and directed. |
| 12 | Supply & fixing high density polyethylene pipe (HDPE) 160 mm bore of presure rarting PE 100 PN 10 as per IS 4984-2016 Black colour complete with all fittings required at siteNote : (i) Cost of the all jointing material &fittings such as Tee, Bend, Socket etc are included in the cost of item rate.Make : Polytuf/supreme/Jindal/Jack pipes |
| 13 | Material and labourfor site clearance by means removing of debris, cutting of grass, bushes, plant growth and disposed off up to a distance not more than 50mtr from the starting point all as directed at site at various water supply installations. Note:- This item shall be execute twice in six month at a particular site/location. |
| 14 | Supply and fixing MS gate of size 1000 mm x 450 mm with angle iron frame, channel for MS gate welded with stainless steel spindle for up and down movement of MS gate fixed to wall of sediment tank channel complete all as directed by Engineer-in -charge |
| 15 | Supply and fixin repair tyre coupling guard made out of 3 mm thick MS sheet with one coat of primer and two coat of synthetic enamelled paint suitable for 15 HP to 125 HP Pump set including necessary fixing arrangement, welding work complete all as specified and directed |
| 16 | Supply and fix mild steel flat iron for securing of chain link fencing conforming to Fe 290 Gde E-165 in post holes and strut in fencing including fabrication i.e cutting tops drilling holes notching for wire welding etc. complete all as specified and directed. |
| 17 | Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15 cm but not exc 22.5 cm long diamerer of neck 12mm complate all as specified and directed |
| 18 | Supply only chain link fencing MS galvanised fencing any size or type weight exc 4 kg per square metre as approved by Engineer-in-charge |
| 19 | Fixing only chain link fencing including line wire any mesh size any type to any type of standards rails straining bolts etc including provision of binding wire any size or type weight exc 4 kg per square metre as approved by Engineer-in-Charge |
| 20 | Material and labour 15 mm thick cement plaster on fair face of brick/concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Material & Labour for applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over all new or old surfaces. |
| 22 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 23 | Material and labourtwo coats of oil bound distemper on wall surfaces after applying 1 to 1.5 mm thick wall care putty including preparation of surfaces complete all as specified and directed. |
| 24 | Dismantling existing PCC and Material and labourfor cement concrete 1:2:4 type B1 using (20 mm graded stone aggregate) as in mass concrete (for pump set foundation etc) and similar work including necessary form work finished even and smooth complete all as specified and directed. |
| 25 | Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description of thickness in floors, apron etc. complete all as specified and directed. |
| 26 | Demolition of concrete in ground floors & paving not exc 15 cm thickness (below or above ground level)and in any position complete all as specified. |
| 27 | Surface excavation n.exc30 cm deep and averaging 15cm deep and getting out in soft soil complete all as specified and directed.. |
| 28 | Material and labourfor 75 mm thickPCC 1:4:8type D-2 using (40mm graded stone aggregate) as in sub base floors complete all as specified. |
| 29 | Material and labourfor sand filling under floors or in foundations including watering and conolidation all as specified and as directed by Engr-in-Charge. |
| 30 | Material and labour for machinepressed precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with colour (as approved by Engr-in-Charge) complete all as specified |
| 31 | Supply and fixing erecting steel tubular swaged poles erected to truly vertical or planted as strut complete with 6mm thick mild steel base plate(300mmx300mm), welded to pole, finial taper plug, bolts, nuts, and screws poles made out of ERW MS tubing conforming to IS-2713 Part-II Type 410 SP-31, 9mtr long including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paintinternally and portion embedded in concrete, making five black & white bands at lower portion of pole each 300mm wide alternately upto the height and marking pole No. with black paint at suitable height including making two nos holes of suitable size in steel tubular pole by gas welding for passing PVC cable connection from junction box to flood lights through pole where junction box to be fitted in pole, complete all as specified and directed by Engr-in-Charge. Note : Excavation and Earth Work ,PCC in foundation shall be measuredand paid for separately. |
| 32 | Supply and fix in replacement 150 Watt LED Flood light with pressure die cast aluminium housing & toughened glass with IP-66 degree protection, individual LED"s must have peanut lenses for better throw across & along the road with luminarie efficacy of greater than 110 lumen/Watt (Minimum lumen output of luminarie should be 16500 Lumens) color rendering (CRI) of > 75 and co-related color temperature (CCT) of 5700K (+ 500K), The luminarie should have 5 KV surge protection,PF > 0.95 voltage range of 140-280V should be provided.Luminarie should have top maintainable driver compartment for easy access to driver during maintenance.The driver used must be a constant current driver with efficiency of > 85% complete all as specefied and directed by Engr-in-charge.Make:- Crompton/Phillips/Havelles, including taking down old flood light fittings |
| 33 | Supply and fixmoduler box made of FRP / inpact resistance plastic & heat resistant materialsincluding size 200 x160 x100 mm withIP 65,MCB proviosn suitable connection for three phase armoured enlclouseweather proof , water proof, dust proof internally embdded gas kit with proviosn of incoming and outgoing cable entry through similarIP protected matric size gland haff turn screw of openeeble lid .screw is made out of polycarbonatematerial alongwith MS /MS powder coted/ galavinsedpol mouned clamp of required size( OD of the pole ) and taking down old unserviceable. Make Hensel / Sintex |
| 34 | Material & labour for fixing new street light bracket made out of GI pipe medium grade 40 mm bore circular type/squre type and suitable for provision offour flood lights. Approx dia of circular bracket not less than 60 cm (excuding both side dia of circular bracket) includingclamps (if required), cutting. Welding drilling holes , nut, bolts washer etc and alsoincluding one coat of red oxide primer and two coat of aluminium paintcomplete including taking down existing unserviceable complete all as directed by Engr-in-Charge. |
| 35 | Supply and fixing 2 core twistedflexiable weather proof cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 sq mm confirming to relevent IS complete all as specified & directed including taking out old unserviceable cable. |
| 36 | Material and labourfor colored glazed ceramic tiles in vrtical surface 350x250x7 m /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl cement screed 10 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 37 | Material and labourfor dismantling floor, earth or wall tilingincluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 38 | Taking down carefully Unserviceable Street liight/Security light/High Mast lightfitting of any capacityfrom pole/Structure and repair/replacement of worn out parts such as SPD/Driver/ toughened glass etc,cleaning of fittings,cover,copper wire,clamps ,nuts and bolts,mounting bracket and re assembling the same after repair,testing and refixing in pole/other location including provision of necessery T & P like ladder/Boom Vehicle, tools ets as required for taking down and refixing of street light/Security light/High mast light complete all as specefied. Note : Replacement of defective spare parts of fitting (to make functional ) will be measured and paid separately as supply only.However, cost of replacement screws, nuts, bolts, and cleaning of fittings shall be deemed to be included in quoted rate. |
| 39 | Supply and fix in replacement driver for LED energy saving & enviornment area light fittingof 40 watt to 70 watts security light with active power factor correction (APFC) electronic driver.LED driver of suitable watt with existing LED secuity light fittingwith operating voltage between 100-270 V of existing specifications & make complete all as specefied and as directed by Engr-in-charge. |
| 40 | Supply and fix in replacement driver for LED energy saving & enviornment area light fittingof 90 watt to 150 watts security light with active power factor correction (APFC) electronic driver.LED driver of suitable watt with existing LED secuity light fittingwith operating voltage between 100-270 V of existing specifications & make complete all as specefied and as directed by Engr-in-charge. |
| 41 | Supply and fixing SPD suitbale for 40 to 72 watt LED light fitting all as directed by Engr-in-Charge. |
| 42 | Supply and fixing SPD suitbale for 90 to 150 watt LED light fitting all as directed by Engr-in-Charge. |
| 43 | Material and labourfor Copper wire multistand 1.5 sqmmall as directed by Engr-in-Charge. |
| 44 | Material and labourfor 15mm thick rendering on brick surfaces/upper surface/side surface of semi under ground water storage sump of any capacity or on any other as directed by Engr-in-Charge,in cement mortar 1:6 and finished surface even and smooth without using extra cement complete all as specified. |
| 45 | Dismanteling of plastering / concrete on upper surface of semi undergroundwater storage sump laid bedded and pointed in any mortar of any description of thickness in floors, apron etc complete all as specified and directed. |
| 46 | Material and labourMS Chequered plate 7 mm thck. in size including cutting fabricated cold or hot welding at site drilling holes nuts - bolt and washers etc including angle iron 65 mm x 65 mm x 6 mm thick for mounting of MS sheet cover dully painted with black bituminous paint over one coat of red oxide primer and as directed. including breaking of existing duct for grouting of angle iron, and making good PCC surface of the existing duct , at water supply installation all as specifid and as directed by Engr-in-Charge. |
| 47 | Material and labourfor repair of cable duct of any size in water supply installations broken cable duct shall be made by brick masonry built in cement mortar PCC 1:3:6 of existing size and base surface area of cable duct shall also built in cement mortar PCC 1:3:6 with adequate plastering andplastering 15mm thick in cement mortar 1:4 on both sides of cable duct and half of the cable duct shall be filled with sand for cable protection and each existing cable shall be laid in proper way complete all as specified and directed. |
| 48 | Material and labourfor earthing complete with galvanized steel earth plate electrode 600 mm x 600mm x6.0mm thick buried directly in ground ( earth pit not less than 2.25 mtr below normal ground level ) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size 25x4mmas earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead including PCC pit in PCC 1:2:4 type B-1, RCC covermade out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle andangle iron 40x40x5mm frame, GI medium grade watering pipe 20mm bore and funnel with wire mesh light grade protection pipe 40mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion all as directed. Note: (i) On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge. (ii)More than 7 meter length of earth strip will be measured separately under relevant item |
| 49 | Removing of existing filter bed/media i.e. gravel and sand etc. from filter bed of size 7x2.5x1.5 mtr, Screening, seperating, cleaning and washing the gravels/sand obtained from filters for reuse and removing the soil to a distance n.exc 50m and applying one coat of apex Weather proof paintt on internal surface of the filter and painting water channel of filter with black enamel paint afterscruubbing the walls and channel and reloading the cleaned filter media in the filter complete all as specified and directed. Note : Extra quantity of gravel / sand required to top up the filter bed shall be paid under relevant item. Location - New Bijapur Filtration Plant. |
| 50 | Material and labourfor laying gravels of size 25 mm to 40 mm in 30cm layers in filter beds including screening, cleaning and washing complete all as specified and directed. (Source of gravel:-Lal Kuan, Haldwani). |
| 51 | Material and labourfor laying gravels of size 16 mm to 25 mm in 30cm layers in filter beds including screening, cleaning and washing complete all as specified and directed. (Source of gravel:-Lal Kuan, Haldwani). |
| 52 | Material and labourfor laying of natural quartz sand of size 1.5 to 2.5mm in filter bed complete all as specified & directed. (source of sand:- Janshi/Babina) |
| 53 | Supply and fix in replacement filter nozzel plastic as per existing complete all as specified & directed. |
| 54 | Draining out water from fluidized aerobic bed- 2 Nos of size 4.7 x3.65 x 3.5 meters (approx) manually or mechanically taking out existing FAB MEDIAand stacking it carefully at STP complex, Cleaning/desludging of aerobic bed by means of scrappinginside walls andbottom bysteel wire brush to remove raw material and transport to out side STP complex for disposal and thereafter cleaning/washing of interior surface using high grade bleaching powder lime mixedwater and applying two coats of Apex Weather proof paint on external surface of the tank including following :- (i) Cleaning of filterpipe including replacement of filters. (ii) Cleaning/testing of compress air pipe system and carrying out minor repairswhenever required. (iii) Washing properly & carefully stacked FAB MEDIA by using fresh water & Lime-bleaching water and refilling the FAB MEDIAinto fluidized aerobic beds as directed. Location - STP Anarwala |
| 55 | Draining of water from tube settler tank - 2 Nos of size 4.7x3.3x 5.5meters(approx) manually or mechanically, Cleaning /desludging of tube settler tanks by means of scrapping inside walls and bottom by steel brush to remove raw material and transport it to out side STP complex for disposal, there after cleaning/washingof interior surface of tank walls & bottom using high grade bleaching powder and lime mixed water andapplying two coats of Apex Weather proof paintt on external surface of the tank. Note: The media shallnot be removed from tube shelter tank while washing it complete all as specified and directed. Location - STP Anarwala |
| 56 | Cleaning/desludging of raw sewage under ground sump (Equalisation tank) 5.6 x6.6 x 6 meters (approx)including screening chamber by closing main incoming manhole and pumping out raw sewage to nearest drain by using portable non clog pump set, cleaning of raw sewage sump manually or mechanically usingspecial T&P such as movable sewage cleaning tanker scrapping inside wall, and bottom by steel wire brush to remove rawmaterialand transport it to out side the STP complex for disposal, thereafter cleaning/washing of interior surface of underground sump using high grade bleaching powder and lime mixed water and applying two coats of Apex Weather proof paintt onexternal surface of the tank complete all as specified & directed. Location - STP Anarwala |
| 57 | Draining out of water from chlorine contact tank/treatment water supply tank of size 6 X6X 2.0 meters (approx)manually or mechanically, cleaning/washing by scrapping inside walls and bottom by steel wire brush to removerawmaterials and transport to out side STP complex for disposal, there after cleaning/washing the interior surfaces of tank walls & Bottom using high grade bleaching powder and lime mixed water and applying two coats of Apex Weather proof paintt on external surface of the tank. Location - STP Anarwala |
| 58 | Periodical maintenance of sludge drying bed of size 3 x 3 mtrby removing all floating material, scrapping and taking out filter media mixed with sludge to a depth of 25 mm to 32 mm, cleaning wall from inside, taking out sludge and disposal out side MOD land, digging out filter media up to 150mm depth for increasing the porosity, leveling the media uniformly in filter bed and applying black enamel paint oninternal surface above media, applying Apex weather proof paint on external surface of the tank. Note:- (i) Additional qty of FAB MEDIA and pea gravel required to be filled in addition to existing qty will be measured and paid separately. Location - STP Anarwala Notes for item Nos.54 to 58 : (a) The item shall include all type of scaffolding, supports, ladders, platforms etc. and safety equipments required for working in the foul conditions/sumps. (b) Surfaces of the tanks after washing and cleaning shall be got approved from the Engr-in-Charge before carring out further treatment. (c) Contractor shall provide take all precautionary measures and provde necessary tools, dresses, gears etc to the workmen required for working in foul conditions at his own cost and shall be resposible for any type of accident and mishappening. (c) Sludge shall be transported in closed containers/ trucks. (d) The tenderers are advised to visit the site to know the exact location, depth and condition of the sumps before quoting the rate. |
| 59 | Material and labourfor preparation of old painted steel surface and applying one coat of red oxide primer andone coat of synthitic enamel paint to all pipe lines, railings, any type of channel, angle iron, duct cover or any other metallic part at New Bijapur filteration plant all as specified. |
| 60 | Material and labour for water sample testing for any of the sources as directed by Engr -in-Charge by collectingsample of raw and treated water in clean sealed container in presence of representative of GE and same shall be got tested for physical, Biological and chemical test for potability of water as per relevant IS, once in every three months from a Govt recognized lab and Test result of water shall be submitted to AGE E&M office for record. |
| 61 | Supply only O-Tolidine Reagent solution for chlorine estimate packed in glass bottle of 500 ml capacity Make " Fisher scientific/Nice Chemical or equivalent |
| 62 | Material and labourfor cleaning of RCC under ground sediment tank of 2.75 Lakh gallon capacity (approx)at New Bijapur Filtration Plant by brooming down, scrapping all the side walls and bottom, removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and applying one coat of apex Weather proof paintt on internal and external surface of the tank , writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm complete all as specified and as directed by Engr-in-Charge. |
| 63 | Material and labourfor cleaning of RCC under ground raw water sump of 3 Lakh gallon capacity (approx) at New Bijapur Filtration Plant by brooming down, scrapping all the side walls and bottom, removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm complete all as specified and as directed by Engr-in-Charge. |
| 64 | Material and labourfor cleaning of RCC clariflocculator of capacity 75Cum/hr, of size 10.5mtr dia appx 4mtr depth at New Bijapur Filtration Plant by brooming down, scrapping all the side walls and bottom includingchannels, washoutsystem, removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water, and painting allMS work like channel, gear assembly, rails, railing or any other metallic partwith one coat of synthetic enamel paint,applying one coat of apex Weather proof paintt on internal and external surface of the tank and writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80x10mm, complete all as specified and as directed by Engr-in-Charge. |
| 65 | Material and labourfor cleaning of sludge water tank of size appx. 8.00x3.5x2.25 meters at New Bijapur Filtration Plant brooming down and scrapping all the side walls and bottomby brooming down, scrapping fungus, scales, dirt, sludge etc., taking out sludge from inside of tankincludingall valves, channels and wash out drain etc and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm complete all as specified and as directed by Engr-in-Charge. |
| 66 | Material and labourfor cleaning of electrically operatedAlum & lime dozing well of size appx. 2.5Mtr dia and 2.25 Mtr depth at New Bijapur Filtration Plant, by brooming down, scrapping all the side walls and bottom , removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and painting all MS work like channel, agitator, pump, motor etc with one coat of synthetic enamel paint, applying one coat of apex Weather proof paintt on internal and external surface of the tank and writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80x10mm, complete all as specified and as directed by Engr-in-Charge. |
| 67 | Material and labourfor cleaning of chlorine contact tank appx size 10x12x4.0 Mtr at New Bijapur Filtration Plant by brooming down, scrapping all the side walls and bottom , removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and painting all MS work like channel, agitator, pump, motor etc with one coat of synthetic enamel paint, applying one coat of apex Weather proof paintt on internal and external surface of the tankand writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80x10mm, complete all as specified and as directed by Engr-in-Charge. |
| 68 | Material and labourfor cleaning of RCC under ground CLEAR water sump of size 20x20x2.75 meters (approx) at New Bijapur Filtration Plant and New MH Pump House by brooming down, scrapping all the side walls, bottom and top, removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and applying one coat of white wash on internal and one coat of apex Weather proof paintt on external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm and painting all inlets, outlets, washouts and overflow pipes with one coat of black bituminous paint complete all as specified and as directed by Engr-in-Charge. |
| 69 | Material and labourfor cleaning of sedimentation tank of size 10.80x4x4.20 meters (approx) consisting of 06 Nos chamber at Birpur filter plant and Anarwala Pump House by brooming down, scrapping all the side walls and bottom, removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm complete all as specified and as directed by Engr-in-Charge. |
| 70 | Material and labourfor cleaning of filter bed size 25x9.20x3.20 meters at Birpur Filter Plant by digging 30 cm sand, brooming down and scrapping all the side walls and bottom, including all valves, channels and wash out drain etc removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm complete all as specified and as directed by Engr-in-Charge.. |
| 71 | Material and labourfor Cleaning of raw water tank (Cone shape)at Patia Pump House by taking out deposit silt/mud from inside of tank upto bottom surface including scraping deposit alge on inside wall and washing with lime water upto bottom, applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm completeall as specified and directed by Engineer-in-Charge. |
| 72 | Removing of existing filter bed/media i.e. gravel & sand etc. from filter bed size25x9.20x3.20 meters , Screening, seperating, cleaning and washing the sand/gravelfor reuse, refill the reusable sand/gravel after cleaningand removing the spoil to a distance n.exc 50m complete including side intake channel and painting the clean wall surface (Internal & External) of filter bed and channel with Apex Weather proof paintt all as specified and directed. Location - Birpur Filter Plant Note : Extra quantity of gravel / sand required to top up the filter bed shall be paid under relevant item . |
| 73 | Material and labourfor Cleaning of raw water tank (for Anarwala) having two partitions by taking out deposit silt/mud from inside of tank upto bottom surface including scraping deposit alge on inside wall and washing with lime water upto bottom, applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mmcompleteall as specified and directed by Engineer-in-Charge. Location - Patia Pump House. |
| 74 | Material and labourfor Cleaning of raw water tank appx size 124.5 x 7.8 x 5.5 Mtr (Cone shape) having two chambers (one chamber is single and other chamber having three partitions) by taking out deposit silt/mud from inside of tank upto bottom surface including scraping deposit alge on inside wall and washing with lime water upto bottom, applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm completeall as specified and directed by Engineer-in-Charge. Location - Patia Pump House. |
| 75 | Removing of existing filter bed/media i.e. gravel and sand etc. from filter bed of size 5x4x2.5 mtr, Screening, seperating, cleaning and washing the gravels/sand obtained from filters for reuse and removing the soil to a distance n.exc 50m and applying one coat of apex Weather proof paintt on internal surface of the filter and painting water channel of filter with black enamel paint afterscruubbing the walls and channel and reloading the cleaned filter media in the filter complete all as specified and directed by Engr-in-Charge. Note : Extra quantity of gravel / sand required to top up the filter bed shall be paid under relevant item. Location - Patia Pump House. |
| 76 | Material and labourfor cleaning of top layer of filter bed size 33.50x12.60x2.70mtr by digging 30 cm sand, brooming down and scrapping all the side walls upto top of filter media , including all valves, channels and wash out drain etc removing fungus, scales, dirt, sludge etc., taking out sludge from inside of tank and depositing the same at a distance not more than 100 mtrs and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc, draining out water and applying one coat of apex Weather proof paintt on internal and external surface of the tank, writing date of cleaning in white capital letters with sythetic enamel paint on black back ground, size of letters 80 x 10mm complete all as specified and as directed by Engr-in-Charge. |
| 77 | Removing of existing filter bed/media i.e. gravel & sand etc. from filter bed size33.50x12.60x2.70mtr , Screening, seperating, cleaning and washing the sand/gravelfor reuse, refill the reusable sand/gravel after cleaningand removing the spoil to a distance n.exc 50m complete including side intake channel and painting the clean wall surface (Internal & External) of filter bed and channel with Apex Weather proof paint all as specified and directed. Location - Anarwala Pump House. Note : Extra quantity of gravel / sand required to top up the filter bed shall be paid under relevant item . Notes for item Nos 62 to 77 : (a) The item shall include all type of scaffolding, supports, ladders, platforms etc. and safety equipments required for working in the sumps. (b) Internal surface of the tank after washing and cleaning shall be got approved from the Engr-in-Charge before carring out further treatment. (c) The tenderers are advised to visit the site to know the exact location, depth and condition of the sumps before quoting the rate. |
| 78 | Material and labour for servicing of DG set of any make by cleaning, servicing, oiling and greasing of moving parts,checking the serviceability of self starter, alternator, AVR for proper voltage out put,Batteries voltage & electrolyte be checked & added upto top level, functunability of safety devices, all nut - bolts of Engine and alternator,proper tension of fan belts, check coolant level and if necessary top up.. Ensuring leak proof of all type hose for water , pipe line of fuel and lub oil. Checking of air cleaner element & clean it with dry compressed air (60 psi pressure.) including labour for replacement of lubricating oil filters element complete set , Fuel filters element,lubricating oil ,complete all as specified and directed for following capacity.Note: servicing will be done through authorised dealer only and a certificate to this effect will be submitted from authorised dealerto the department. |
| 79 | 500KVA3 phase 50 Hz, |
| 80 | 225 KVA capacity |
| 81 | 160 KVA capacity |
| 82 | 100KVA to 125 KVA 3 phase 50 HZ, |
| 83 | 62.5 KVA5o 75 KVA 3 phase 50 HZ, |
| 84 | 20KVAto 50 KVA 3 phase 50 HZ, NOTES: (i) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts.The cost of servicing of DG set are inclusive of replacement ofsmall/minor parts such as nuts, bolts, washers, locking nuts, small springs, studs etc and parts mentioned in the item above.. (ii) Make of DG set be one of the make mentioned in the item. (iii) Spare parts to be replaced shall be suitable for the same make and model of engine as installed at site and serviced. (iv) Cost of lubricating oil, filters shall be measured and paid separately. |
| 85 | Supply only of the following new parts suitable for fuel injection pump assembly repaired under Schedule `A" item No 78 to 78.06 here-in-above :- (Note :-Fixing element of these items is included under the rates quoted by the contractor for Schedule `A" item No 78 to 78.06. |
| 86 | Air Filter element for 500 KVA DG set |
| 87 | Air Filter element for 225 KVA DG set |
| 88 | Air Filter element for 160 KVA DG set |
| 89 | Air Filter element for 100 to 125 KVA DG set |
| 90 | Air Filter element for 50 to 62.5 KVA DG set |
| 91 | Air Filter element for 20 to 35 KVA DG set |
| 92 | Fuel Filter element for 500 KVA DG set |
| 93 | Fuel Filter element for 225 KVA DG set |
| 94 | Fuel Filter element for 160 KVA DG set |
| 95 | Fuel Filter element for 100 to 125 KVA DG set |
| 96 | Fuel Filter element for 50 to 62.5 KVA DG set |
| 97 | Fuel Filter element for 20 to 35 KVA DG set |
| 98 | Oil Filter element for 500 KVA DG set |
| 99 | Oil Filter element for 225 KVA DG set |
| 100 | Oil Filter element for 160 KVA DG set |
| 101 | Oil Filter element for 100 to 125 KVA DG set |
| 102 | Oil Filter element for 50 to 62.5 KVA DG set |
| 103 | Oil Filter element for 20 to 35 KVA DG set |
| 104 | Water hose pipe set with clamp for DG set. |
| 105 | Lubricating oil pipe set with coupling forDG set. |
| 106 | Fuel pipe set with coupling forDG set. |
| 107 | Draining out used Engine oilof DG Set, filling in a cane and cleaningsump complete andre-filling of new engine oil( 20 W- 40 grade) of Make SERVO OF IOC/HINDUSTAN PETROLEUM/ CASTROL) as approved by GE. (Note- Oil 20W40 shall be measured and paid separetely as supply only). |
| 108 | Supply only engine oil 15 W 40 in sealed drum.Make: Castrol Super /Hindustan petrollium (Packing of 210 litrs). |
| 109 | Supply only raditor coolant concentrate. Make:- K- COOL SUPER PLUS/ CASTROL |
| 110 | Supply and fix in replacement of Battery 12volt 180 AH.Make:- Exide /Amaron |
| 111 | Supply and fix in replacement of Battery 12volt 65/75 AH. Make:- Exide /Amaron |
| 112 | Material and labourforrepair of 12 volt/24 voltBattery charger complete all as specified and directed. |
| 113 | Supply andfixing of CPVC pipe line including all type of connected fittings for solar water heating system complete and taking down the same all as specified and directed by Engr-in-Charge. |
| 114 | Dismantiling exiting unserviceable 100 LPD/ 200 LPD solar water heating system ETC and re-fixing its original position after necessary repair/ replacement of unserviceable spares (Evacuated Tube Collector) all as specified and directed.Note : Replacement of spares shall be measured & paid separately under respective items of Sch "A". |
| 115 | All as per Srl Item No 108 here-in-before but 300 LPD / 500 LPD complete all as specified and directed. |
| 116 | Material and labourfor cleaning of solar water heating system dismantled against item No108 and 109 here-in-before and Servicing of solar water heater system byCleaning complete tubes and internally, Anti-scaling Cleaning of all effected parts . Removing any type of chocking of Solar Collector or tube, repairing any type leakage from Gasket,Rubber Washer after Cold Water inletand before hot water outlet of Solar Water Heater with cleaning agent complete all as specified and directed. |
| 117 | Supply and fix in repair hot water pipe line 20 mm dia (heavy grade) duly insulated with glass wool 50mm and aluminum cladding complete all as specified and directed. |
| 118 | Supply and fix in replacement heating element of capacity of 3 KW, thread type, suitable for solar water heating system complete all as specified and directed. |
| 119 | Supply and fix in replacement thermostat, suitable for solar water heating system complete all as specified and directed. |
| 120 | Supply and fix in replacement silicon washer of size suitable for solar water heating system complete all as specified and directed. |
| 121 | Supply and fix in repair solar water heating system evacuated tube any size complete all as specified and directed. |
| 122 | S &F in replacement sheet metal enclosures for DB, SP 4 way with 200 Amps bus bar double door complete all as specified and directed. |
| 123 | Supply and fix in replacement Isolator TPN, 32 Amps complete all as specified and directed Engr-in-charge. |
| 124 | Supply and fix in replacement Isolator SPN, 40 Amps complete all as specifed and directed Engr-in-charge. |
| 125 | Supply and fix in replacement MCB, SP, "C" series, 6-32 Amps complete all as direced Engr-in-charge. |
| 126 | Supply and fixing 3 core twisted aluminium flexiable weather proof cable PVC insulated and unsheathed multistranded copper conductor of size 4 sq mm confirming to relevent IS complete all as specified & directed including taking out old unserviceable cable. |
| 127 | Material and labourfor cleaning of RCC over head reservoirs of capacity 25000 Gln by brooming down all the side walls, bottom and top, removing fungus, scales dirt sludge etc. from inside and depositing the same at a distance not more than 100 mtrs after emptying the tank completely and washing the tank inside with water and chemicals such as bleaching powder, castic soda etc and applying one coat of white wash on internal surface of the tankand writing date of cleaning in white capital letters on black back ground, size of letters 80 x 10mm with sythetic enamel paint and marking the direction of flow completeincluding draining of excess water in tank by providing pump all as specified and as directed |
| 128 | All as per item No 121here in before but RCC OH tank of capacity 50000 gallon complete all as specified and directed. |
| 129 | All as per item No 121here in before but RCC OH tank of capacity 100000 gallon complete all as specified and directed. |
| 130 | Material and labourfor cleaning of RCC under groun/semi under grooud sump of capacity 25000 Gln by brooming down all the side walls, bottom and top, removing fungus, scales dirt sludge etc. from inside and depositing the same at a distance not more than 100 mtrs after emptying the tank completely and washing the tank inside with water and chemicals such as bleaching powder, castic soda etc and applying one coat of white wash on internal surface of the tankand writing date of cleaning in white capital letters on black back ground, size of letters 80 x 10mm with sythetic enamel paint and marking the direction of flow completeincluding draining of excess water in tank by providing pump all as specified and as directed |
| 131 | All as per item No 124 here in before but under ground CLEAR water Sump of capacity 50,000 gallon complete all as specified and directed. |
| 132 | All as per item No 124, here in before but under ground CLEAR water Sump of capacity 1,00,000 gallon complete all as specified and directed. |
| 133 | All as per item No 124, here in before but under ground CLEAR water Sump of capacity 2,00,000 gallon complete all as specified and directed.Note for item No 124 to 127 :(i)All required safety equipments (Gumboot, helmets, safety belts, Safety googles, torch light etc) and necessary insurance for safety of working staff to execute the work is responsibility off the contractor.(ii)Lighting arrangements if required to be provided by the cconctor temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate. (iii)Contractor will not be allowed more than one day to do the work inside of the each OH tank/UG sump to prevent interruption of water supply to the users. |
| 134 | Material and labourfor cleaning ofraw water channel upto 0.60 mtr x1.5mtr cross section size by brooming down all the side walls, bottom and top, removing fungus, scales dirt sludge etc. from inside and depositing the same at a distance not more than 100 m and washing the channel inside with water and chemicals such as bleaching powder, castic soda etc and applying one coats of apex Weather proof paintt on internal surface of the channelcomplete all as specified and directed. |
| 135 | Supply, fixing, testing and commissioning new Air Blower of 300 Cum/hr at 0.65 Kg/sqcm pressure, 3 phase, 440 voltage, 1530 rpmcoupled with suitable capacity of new induction motor complete in all respect all as directed by Engr-in-Charge. |
| 136 | Supply only alum crystalcomplete all as specified and directed. |
| 137 | FAB MEDIA as per sample for STP.Make Ion exchange/Thermax |
| 138 | Filter media for filter bed for STP(Pea gravel 3 mm to 4.5mm) |
| 139 | Testing of sewage effluent at the inlet of raw sewage sump and out let of chlorine contact tank sampling and analysis to be carried out by NABL accredited authorized LAB as per IS - 3025 for essential parameters such as residual chlorine, TDS, TSS, BOD & COD Note: Samples of raw sewage are to be collected by contractor in presence of rep of accepting officer every month &submitted result of the test completed all as specified as directed. |
| 140 | Supply only bacteria culture, suitable for MBBR type plant complete all as specified and directed. |
| 141 | Supply only DAP fertiliser for day to day use in sewage treatment plant complete all as specified and directed |
| 142 | Supply only molasses (Sheera) for day to day use in sewage treatment plant complete all as specified and directed. |
| 143 | Supply and fix in repair solarwater tank 100 litre per day capacity ISI marked,with electrical heating back up complete all as specified and as directed. Make :Stellar/Solarizer/TATA |
| 144 | All as per item No 137 here-in-above but 200 Ltr per day capacity complete all as specified and directed. |
| 145 | Supply and fix in repair, flat plate collector type solar panel of size 2 mtr X 1mtr with heat exchanger ISI marked, Make :Stellar/Solarizer/TATA |
| 146 | Supply only urea for STP complete all as specified and directed. |
| 147 | Supply only coper sulphate for swimming pool complete all as specified and directed. |
| 148 | Supply only Soda ash for swimming pool complete all as specified and directed. |
| 149 | Supply only HCL for cleaning of swimming pool complete all as specified and directed. |
| 150 | Comprehensive maintenance and repairs of MBBR type STP 400 Cum/day incl examining, adjusting, lubricating, greasing and replacement of u/s parts complete all as directed by E-in-charge. The STP installationconsists of following major components :- (i)Bar screen - 1 No. (ii) Oil grease trap - 01 No. (iii)Equalization Tank - 01 No. (iv)FAB reactors - 02 Nos. (v) Tube settler - 01 No. (vi)Chlorine Contact tank - 01 No. (vii) Filter feed tank - 01 No. (viii)Treated water tank - 01 No. (ix) Sludge holding tank - 01 No. (x)Sludge drying bed - 06 Nos. (xi) Filter press - 01 No. (xii)Air Blower - 02 Nos. (xiii)FAB feed pump - 02 Nos. (xiv) Dozing machine with agitator - 04 Nos. (xv)Filter press feed pumps - 02 Nos. (xvi)Sludge feed pump - 02 Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
