Tender For Repair And Maint Of Overhead Water Tank, Air Compressor, Irp, Chemical Dosing System, Borewell, Starter Panel And Connected Items Installed At Various Pump House Of Af Stn Mohanbari Under Ge (Af) Mohanbari
Tender Value
25 Lakhs
Estimated cost
Bid Submission
10 Jun 2023
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mohanbari → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maint Of Overhead Water Tank, Air Compressor, Irp, Chemical Dosing System, Borewell, Starter Panel And Connected Items Installed At Various Pump House Of Af Stn Mohanbari Under Ge (Af) Mohanbari
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cleaning of internal surface of existting 10000 Gallons capacity steel PS OH tank installed at height of 40\" to 50\" by scraping with brush, rubbing down scales, dirt, sludge etc and washing with clean water using bleaching powder/ caustic soda and taking all rubbish from the tank, removing the same to a distance not exc 50 m and applying filling compound to fill joint gap internally including two coat of black bituminuos anti corrosive paint suitable for drinking water over a coat of red oxide primerinternally after cleaning and writing the date of cleaning complete all as specified and directed. |
| 2 | M&L for cleaning external steel surface of existing PS OH tank installed at height of 40\" to 50\" by complete removal of old paints/ rust by applying detergent/ scrapping/ wire brushing/ sand papering and washing with clean water and painting of external surface of PS OH tank complete with two coats of aluminium paint over one coat of red oxide primer including painting of complete structure, sluice valve and connected all pipe lines from tank to borewell as per colour coding complete all as specified and directed. (Note- Work shall be carried out in safety norms and all safety should be provided by the contractor and no extra claim shall be admissable at later stage.) |
| 3 | Material and labour for mild steel bracing/ channel/ angle iron support fabricated from structural steel sections including MS Nuts, bolts and washers with necessary welding, bending cold or hot, drilling holes for bolts in any shape or size for connecting ledder plates including platform for every 10 feet height for overhead tank on height of 40\" to 50\" including two coats of aluminium paint over one coatof primer.complete all as specified and directed. |
| 4 | Material and labour for repair of water level indicators by changing the nylon rope into SWR 6 sqmm dia of existing length, greasing and repair to rope guide pully including replacement of unsceviceable float ball at over head tank of height 40\" to 50\" complete all as specified and as directed. |
| 5 | Material and labour for opening of BP Dozer of capacity 24 Gallons, cleaning inside of the BP Dozer including prepration of rusted existing surfaces and painting with two coats of alumimium paint externally and two coat of black bituminuos anti corrosive paint suitable for drinking water over a coat of red oxide primer internally complete after & including replacement of following under mentioned items with new suitable for 24 Gallons BP Dozer complete all as specified and directed:-(a) Best quality bladder complete - 04 Nos(b) Top plate & nozzle assembly- 04 Nos(c) Stop valve 1/2\" - 04 No |
| 6 | Supply and fix in replacement ofbutterfly valve of size 100mm (backwash filter valve) for pressure filter of 10000 gln capacity complete all as specified and directed. |
| 7 | Supply and fix in replacement of CI venturi of size 100 mm dia having arrangement for dosing of bleaching/ altoch Gp solution complete suitable for 24 Gallons BP dozer all as specified and directed. |
| 8 | M&L for disconnecting of unserviceable air compressor from the pump house including 3 phase, 2 HP, 440 volts motor and compressor alongwith PVC pipe, separating the all parts, cleaning the serviceable parts, re-metalling machinery polishing including overhauling, rewinding of motor with super enamled copper wire of existing gauge, greasing, repairing of piston head and re-assembling after replacement of under mentioned spare parts and necessary painting by applying spray paint with two coat of synethetic enamel paint over a coat of red oxide primer complete all as specified:-(a) Piston for pump set -01 set (b) Piston oil ring -01 No (c) Liner for pump set -01No.(d) Bearing -01 No (e)Air nozzle for pump set -01 No(f) Gear lub oil -01Ltr (approx).(g) Compressor air meter, fan belt & wheel-01 Set(h) Gate valve 1/2 inch -01 No. (j)PVC nylen havey duty pipe -12 RM (approx)(k) Adapter for control valve-01No |
| 9 | Material and labour for isolation of electric power supply from the existing system lifting of submersiable motor pump set (upto 20 HP, 3 phase, 415 volts, 50 Hz) from existing borewell of depth upto 45 mtr with the help of chain pully carefully including submersible cable, MS/ GI pipe by unscrewing nut and bolts from flange joints and staking at site for refixing after requisite repair, dismantling of motor pump set, transporting to local civil workshop and taking back to site after greasing, repairing/ reassembling and lowering the submersible pump with connected items to its original position complete including painting with two coat of synthetic enamel paint (1st quality) over a coat of zinc chrome primer including testing on completion complete all as specified and directed.Note:- (a)Spare parts required for repair shall be measured seperately under respective items.(b) Cost of minor parts such as nut, bolt & washers are deemed to be included in quoted rate. |
| 10 | M&L for opening the burned motor upto 20 HP, cutting of all burned winding, cleaning of all parts and rewinding with new polymer insulated copper winding wire of suitable /existing gauge including all insulating materials such as PVC copper cable lead, glass fiber sleeves, cotton tape, insulation paper and applying insulating varnish and heating in heat chamber at appropriate temperature complete all as directed. |
| 11 | Supply & fixing in replacement of bowl suitable for upto 20 HP submersible pump. |
| 12 | Supply & fixing in replacement of brass impeller suitable for upto 20 HP submersible pump. |
| 13 | Supply & fixing in replacement of bushing suitable for upto 20 HP submersible pump. |
| 14 | Supply & fixing in replacement of neck ring suitable for upto 20 HP submersible pump. |
| 15 | Supply & fixing in replacement of SS shaft suitable for upto 20 HP submersible pump. |
| 16 | Supply & fixing in replacement of key suitable for upto 20 HP submersible pump. |
| 17 | Supply & fixing in replacement of coupling suitable for upto 20 HP submersible pump. |
| 18 | Supply & fixing in replacement of thrust bearing suitable for upto 20 HP submersible pump. |
| 19 | Supply & fixing in replacement of sar clip suitable for upto 20 HP submersible pump. |
| 20 | Supply & fixing in replacement of upper & lower housing suitable for upto 20 HP submersible pump. |
| 21 | Supply & fixing in replacement of automatic star delta motor starter suitable for 415 volts, 50 Hz, 3 phase, upto 20 HP submersible pump set including single phase preventor, over load relay protection, timer, contactors, pannel mounting type complete all as specified. |
| 22 | Supply and fixing in replacement of PVC insulated flat copper conductorsubmerssible cable, water proof of size 10 sqmm, 3 core, 1100 volts grade, multistranded as per IS 694/2010 complete all as specified and directed. |
| 23 | Supply and fixing in replacement of PVC insulated flat copper conductor submerssible cable, water proof of size 6 sqmm, 3 core, 1100 volts grade, multistrandedas per IS 694/2010complete all as specified and directed. |
| 24 | Material & labour for prepration of internally old painted steel/ iron surfaces of pressure filter & oxidation chamber by scrapping and cleaning of internal surfaces and applying two coats of black bituminious anti corrosive paint suitable for drinking water complete all as specified and directed. |
| 25 | Material & labour for complete opening of iron removal pressure filter & oxidation chamber of capacity 10000 GPH and taking out existing filter media (sand, gravells), stainers and nozzles, removing (except serviceable for re-use) and depositing filter media to a distance not exceedding 50 m including necessary repair/ welding to make the pressure filter vessels complete water leak proof for improving the strength and finally reassembling the pressure filter including filling of new stainer, gravells & sand in existing position including replacement of worn out gasket and nut bolts and washers complete all as directed. ( Note:- Nozzles, stainers, gravells shall be measured and paid seperatley). |
| 26 | Supply and fixing PVC push type/ threaded type strainer suitable for filteration plant complete all as directed. |
| 27 | Supplying and filling in layers filter media sandas per existing size suitable for use in filteration plant complete all as and directed. |
| 28 | Supplying and filling in layers new washed, cleaned, dust free, graded gravells filter media of grading 25 mm to 20 mm size suitable for use in filteration plant complete all as specified & directed. |
| 29 | Supplying and filling in layers new washed, cleaned, dust free, graded gravells filter media of grading 20 mm to 12 mm size suitable for use in filteration plant complete all as specified & directed. |
| 30 | Supplying and filling in layers new washed, cleaned, dust free, graded gravells filter media of grading 12 mm to 06 mm size suitable for use in filteration plant complete all as specified & directed. |
| 31 | Supplying and filling in layers new washed, cleaned, dust free, graded gravells filter media of grading 06 mm to 03 mm size suitable for use in filteration plant complete all as specified & directed. |
| 32 | Supply and filling in layers mix of manganese dioxide (MnO2) and treated carbofil in lumps of size 20 mm to 15 mm containing 65% of manganese dioxide and 35% KG carbofilsuitable for use in filltration plant complete all as specified & directed. |
| 33 | Supply only calcium hypochlorite granular form of 55% to 65% active granular chlorine packed in 45 kg PVC sealed container suitable for treatment of water for drinking purpose complete all as specified and directed .Make- Potter & Watts/Declibac/AQUAFIT |
| 34 | Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr deep for taking out/ laying of under ground cable, pole, pipe, stay and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath/ pavments complete all as specified and directed. |
| 35 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm spread any type of soil complete all as specified and directed by Engr-in-Charge. |
| 36 | Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and directed. |
| 37 | M&L for boring/ drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing water pipe line upto 110mm complete all as specified and directed. |
| 38 | Taking up or down old GI pipe with fitting of 20 mm bore from surface/ trench including dismantling and removing materials from work site complete all as specified and directed.(Note:- Earthwork shall be measured & paid separetely) |
| 39 | All as per item No. 38.00 above but pipe of 25 mm bore |
| 40 | All as per item No. 38.00 above but pipe of 50 mm bore |
| 41 | Supply, laying, jointing and testing mild steel galvanised water tubing 20mm bore dia medium grade with and including all GI fittings in trench/wall/surfacecomplete all as specified and directed.Note -:(i) Excavation & earthwork shall be measured & paid separately under appropriate item(ii) All fitting required for laying/fixingshall be brought by the contractor and cost there of shall deemed to be included in the quoted rates. |
| 42 | Supply, laying, jointing and testing mild steel galvanised water tubing 25 mm bore dia medium grade with and including all GI fittings in trench/wall/surfacecomplete all as specified and directed.Note -:(i) Excavation & earthwork shall be measured & paid separately under appropriate item(ii) All fitting required for laying/fixingshall be brought by the contractor and cost there of shall deemed to be included in the quoted rates. |
| 43 | Supply, laying, jointing and testing mild steel galvanised water tubing 50mm bore dia medium grade with and including all GI fittings in trench/wall/surfacecomplete all as specified and directed.Note -:(i) Excavation & earthwork shall be measured & paid separately under appropriate item(ii) All fitting required for laying/fixingshall be brought by the contractor and cost there of shall deemed to be included in the quoted rates. |
| 44 | Supply, laying, jointing and testing mild steel galvanised water tubing 80 mm bore, medium grade including all GI fittings fitted to 10,000 gallons capacity PS over head water tank installed at 40\" to 50\" height staging including taking out old complete all as specified and directed. (Note:- Cost for arrangement of staging/ working platform is deemed to be included in the item quoted rate). |
| 45 | All as per item No. 44.00 above but pipe of 100 mm bore |
| 46 | Material & labour for repairing of 100 mm CI pipeline by filling lead joint with all jointing materials and gland packing (wherever necessary) to make joint water leak proof including burning out lead joint in position complete including necessary earth work as required complete all as specified & directed. |
| 47 | Supply & fixing PPR Gate Valves (Brass insert) of 20 mm outer dia including taking out old unservicble valve complete all as specified. |
| 48 | Supply & fixing PPR Gate Valves (Brass insert) of 25 mm outer dia including taking out old unservicble valve complete all as specified. |
| 49 | Supply & fixing PPR Gate Valves (Brass insert) of 50 mm outer dia including taking out old unservicble valve complete all as specified. |
| 50 | Material & labour for repairing of 80 mm dia sluice valve by opening for rectifying leakage, refacing, regrinding, replacement of galand packing, gasket, nut, bolt, washer, wheel and refixing in its original position after testing comeplete all as specified and as directed. |
| 51 | All as per item No. 50 above but pipe of 100 mm bore |
| 52 | Supply & fixing in replacement of cast iron sluice valve of 80mm bore, class PN 1.6, ISI marked with iron wheel head both end flanged, brass spindle any pattern with check nut complete with jointing material nut, bolt and washers etc.complete all as specified and directed. |
| 53 | All as per item No. 52 above but valve of 100 mm bore |
| 54 | Supply & fixing in replacement of 20 mm bore, gun metal gate valve, yoke type, full opening with iron wheel head, screwed both ends, ISI marked complete all as specified and directed. |
| 55 | All as per item No. 54 above but valve of 25 mm bore |
| 56 | All as per item No. 54 above but valve of 40 mm bore |
| 57 | All as per item No. 54 above but valve of 50 mm bore |
| 58 | Supply & fixing in replacement ofcast iron non return sluice valve of size 100 mm with flanged ends, brass spindle any pattern with check nut confirming to IS including jointing material, nuts, bolts, and washer etc complete all as specified. |
| 59 | Material and labour for construction of valve pit chamber of internal dimension 40 x 40 x 40 cm with sub class \"B\" bricks in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8), type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6), type C1 (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 5 mm angle iron and 3 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, two coats of white wash on plastered surface (exposed to view) including necessary excavation in soft/ loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete including dismantling of old all as specified and directed. |
| 60 | Material and labour for construction of valve pit chamber ofinternal dimension 90 x 90x 90 cm with sub class \"B\" bricks in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8), type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 6 mm angle iron 5 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft/ loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete including dismantling of oldall as specified and and directed. |
| 61 | Chemical Analysis (Turbidity,PH Total Hardness, Iron, Chloride, Suplhates, Fluorides, Nitrates , Calcium, Arsenic) of Raw water( before filteration) and filtered water (after filteration) for Pump Houses No 1,2,3 & 5 at 42 Wing AFMohanbarifrom government labortory or NABL accredited labortory as per IS 10500 on quarterly basis, including collection of water sample and arrangements for sending the water to labortory,for testing and submission of the test report complete all as specified and directed.(i) For set of one borewell( both after and before treating ) will be measured as one job and testing will be carried out on quarterly basis for each Pump House) |
| 62 | Supply and fix in replacement of solution preparation/ speed reducing motor-0.25HP, 1440 RPM, single phase AC with suitable connecting cable complete all as specified. |
| 63 | Supply and fix in replacement of chemical dosing pump electronically controlled, 06 lph/ 04 Kgs, RC 11 type, 230 volts, 50 Hz suitable for any type chemical with suitable connecting pipe in both inlet and outlet side and suitable connecting cable complete all as specified. |
| 64 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
AI Tender Summary
Tender Timeline
May 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 12, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender