Public Administrative Department Local Bodies Closing in 0 days TDR #37790108

Tender For Construction Of Toilet In Jharkhand Vikas Uchvidyalay. At - Binglat, G.P- Poklaurfkasiyadih, Block- Tandwa, District- Chatra

Issued by Local Bodies · tandwa, Jharkhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 May 2023
0 days left
EMD
21500
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
tandwa → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Toilet In Jharkhand Vikas Uchvidyalay. At - Binglat, G.P- Poklaurfkasiyadih, Block- Tandwa, District- Chatra

BOQ

Name of Work:Construction of Toilet in Jharkhand Vikas Uch Vidyalay. At - Binglat, G.P- Pokla Urf Kasiyadih, Block- Tandwa, District- Chatra.
Sl. No. Item Description
1Earthwork in excavation in foundation trenches in ordinary soil and disposal of excavatedearth as obtained to a distance upto 50 M. including all lifts, levelling,ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specificationand direction of E/I
2Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I.B.C.D. S.O.R. Item No. 5.1.1 + 5.1.2
3Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.1.10
4Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.6.3
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.1
6Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.2
7Providing designation75A brick work in C.M.(1:6) in Superstrecture………..do…………….do………….
8Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)B.C.D. S.O.R. Item No. 5.3.10
9Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.9.1
10Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.B.C.D. S.O.R. Item No. 5.3.17.1
11Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.B.C.D. S.O.R. Item No. 5.2.6
12Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).B.C.D. S.O.R. Item No. 5.3.5
13Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.B.C.D. S.O.R. Item No. 5.2.14
14Providing designation 125 mm thick reinforced designatin 75 a brick work in CM (1:4) in superstructure with approved quqlity of clean ..do….. all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.2.23
15Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).B.C.D. S.O.R. Item No. 5.3.11
16Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.B.C.D. S.O.R. Item No. 5.3.17.6
17Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.B.C.D. S.O.R. Item No. 5.3.17.3
18Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases.B.C.D. S.O.R. Item No. 5.3.17.6
19Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.7.6
20Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3
21Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.1.7
22Providing and fixing factory made PVC door frame made of PVC xtruded sections of size 75 mm x 53 mm haviing wall thickness 2.0 mm (.02 mm) both verticalssided of the frame reinforced with PVC profile of cross section size 28 mm …..do…..do…...e/i.
23Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (±0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 3........Do.....Do.......E/I (DSR9.146)
24Providing and laying cramic glazed floor tile …….do…….do……...all complete as per drawing apecifiction and draction of E/I. (DSR 11.38)
25Providing and laying 6mm precast white glazed tiles in walls over 12mm cement morter (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and rolity all complete as per building aspesification and draction and of E/I.B.C.D. S.O.R. Item No. 5.6.23.1
26Providing 12 mm thick cement plaster (1:3)…………….do…………..do………………
27Providing 1.5 mm thick cement punning including quring and carriage ….do…………..do………………
28Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.2 + 5.7.11
29Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.4 :8mm dia Bar -
30B.C.D. S.O.R. Item No. 5.5.5 (a) : 10mm dia Bar -
31B.C.D. S.O.R. Item No. 5.5.5 (b) : 12mm & above dia Bar -
32Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding, washing of floors and taxes all complete as per specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.18
33Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).D.S.R. Item No. 13.47.1
34Supplying and filling of brick bats in soak pit all complete
35Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \"p\" trap 15 liters C.I. or C. pull and let go flushing cisternofnames or other I.S.S equivalent make, complete with all fittings. C.I or C.Cbrackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull includingsupplyingand fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.(c) 510mm Long with 10 litre low level P.V.C. cistern
36providing and fixing mail ended 15 mm dia brass bibcock of appvoved qualityy
37Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
38Supplying fitting and fixing CP brass discontener middum quqlity
39Providing& fitting PTMT extention nipple for water tank (32 mm)
40Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
41Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45cm length
42Providing and fixing PVC wast pipe for sink or wash basin
43Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm door bend
44Single tee with door - 110 x 110 x 110mm
45110mm Bend 87.5°
46Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15mm nominal dia Pipes
4720mm nominal dia Pipes
4825mm nominal dia Pipes
49Supplying materials and labours for construction of inspection chamber of designation class 75B brick size 750mm deco, 650x450mm internal dimension having 250mm all thickness in cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. cover with frame (weight not less than 36 kg.) along with earth work in excavation and refilling all complete as per specification and direction of E/I.
50Towel Rail 24\"
51Supplying and fixing 100mm (4\") steel jali
52Providing and placing on terrace (at all floor levels) (PVC) Polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
53Cost of drilling 200mm X 150mm X 150M deep bore well in all kinds of soil rock in rural areas for installation of pump set with hydraulic DTH rig machine, all complete including supplying all material tools drilling rig and air compressor and equipments as well as fuel lubricants and cost of transportation of rig machine and other vehicles up to site including cost of flushing charges, geological investigation etc. all complete as per direction of E/I.(a) 0.00 to 50.00 M to below G.L.
54(b) 50.00 to 75.00 M to below G.L.
55(c) 125.00 to 150.00 M to below G.L.
56Supplying and lowering of 200mm dia PVC. Casing pipe of well thickness 6mm as per standard specification including all taxes vat excise duty freight charge within inspection charges etc. as applicable all complete job.
57Dovlupment of tuve well in accordance with and doing washing, flushing, and developing of drilled tube well to give clean and clear water all complete job as per direction of E/I.
58Providing and fixing sutable size threded mild steel cap ..do…..do….E/I.
59Providing and fixing M/S clamp of required dia to the top of Casine ..do…..do….E/I.
60Supplying one phase 2.00 H.P. submersible pump set having 5000 litre per hour discharge and total head 210m of standard make 3 Phase.P. - 44 (i); PM 1-1-3 (S.O.R. of D.W. & S. Dept.) + 10% C.P.
61Supplying fitting and fixing panel board with MCB voltmeter main with starter having starting capacity and running capacity with indicator etc. all complete required for 5.00 H.P. submerfible pump set.
62Supplying of 4 sq. mm flat copper cable of Finolex make for pump set connection with panel board including labour cost and making conneting etc. all complete.P. - 44 (xi); CD 1-3 (S.O.R. of D.W. & S. Dept.) + 10% C.P.
63Cost of 40 mm dia GI Pipe (Medium) 3 mtr. long screwed at both ends with seamless socket as per IS:1239 (Part 1990) including all taxes, royalty and contractor profit etc.
64Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
65Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire
662 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire
67Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm PVC conduit
6832mm PVC conduit
69Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.72mm x 146mm x 48mm
70121mm x 173mm x 48mm
71Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amp switch
725/6 amp Socket
73Suppylying and fixing batten/Engle Holder
74Supplying and fixing following 240 volts, \"C\" series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.6/32A Single Pole
756/32A Single Pole & Nutrual
76Suppying & Fixing single pole blanking plate in the exiting board
77Copper earth plate electrode:- Earthing with copper earth plate 600mmx600mmX3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcol or coke and salt) complete as required.
78Bulk head fitting with 9/10 wall CFL/LED
79Carriage of material…………do……..do……….e/i.Cement 10km
80Steel 10 km
81Sand 16 km
82Chips 25 km
83Bricks 8 km
84Add 18% GST
85Add1% LC
86Add Phototgrapahy & Signboard

AI Tender Summary

OUR REF NO 37790108
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 29-05-2023
Authority
Authority Name Zilla Parishad
Work Description Construction Of Toilet In Jharkhand Vikas Uchvidyalay. At - Binglat, G.P- Poklaurfkasiyadih, Block- Tandwa, District- Chatra
Basic Detail
Tender No Nit No. 03/2023-24, Group No. 15
Bidding Type Tender
Location
City tandwa
State Jharkhand
Key Dates
Publish Date 22 May 2023
Submission Date 29 May 2023
Open Date 31 May 2023
Finance
Tender Value Ref. Documents
Tender Fee 2500
EMD 21500
Exemption Not Available
Document List
b19743ec-dbe6-4f73-9e40-e5177cc266ef.html
BOQ_95817.xls
TenderDocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 22, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
May 29, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 31, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

b19743ec-dbe6-4f73-9e40-e5177cc266ef.html

xls

BOQ_95817.xls

pdf

TenderDocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender