Construction Of Jeepable Road From Chungling Chowk To Kothi Kanda Km. 0 / 00 To 2 / 000 ( Sh- Rofd, Metalling And Tarring From Km. 0 / 00 To 2 / 00
Tender Value
59.05 Lakhs
Estimated cost
Bid Submission
27 May 2023
0 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalpa → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Jeepable Road From Chungling Chowk To Kothi Kanda Km. 0 / 00 To 2 / 000 ( Sh- Rofd, Metalling And Tarring From Km. 0 / 00 To 2 / 00
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work in all heightsand depthsandin all kinds of soilsincluding saturated soil comprising of Pick,Jumper , blasting work both in soft and hard rock with chiseling, wedging-out of rock where blasting is prohibited, their intermediate classification of soil, setting-out true to the required lines, grades, side slopes, trimming bottoms to levels as shown on the drawing and as directed by the Engineer-in-charge at site according to HP.PWD, specification of 1990 Vol-I and sorting-out useful/ un –usefulmaterials and stacking the same in all leads and lifts in acquired width of the road and transportation of useful/ un-useful materials for filling in road ways camber, embankments for grades, improvement and leveling to required grade and disposing of all surplus excavated earth in acquired width of the road or on approved dumping sites through all modes of transportion including head load or animal transport or mechanically means alongwith its leveling, fine dressing and all labour, machineries, tools, equipments and safety measures and other incidental, necessary to complete the work by mechanised means and labour if required. All useful materials such as stones , shingles, aggregates and slatesshall be sorted- out and stacked along road side, the quantity of which shall not be less then 205.275 cum., failing which recovery @ Rupees 300/cum. (three hundredper cubic metre) shall be effected from the bill of the contractor.Any loss of the public/ private property during the course of execution shall be absolute responsibility of the contractor which shall to be duly compensated by him in all respect, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 2 | Providing and laying of boulder apron laid in wire crates with 4mm (four millimeter) diameter GI wire conforming to IS: 280 and IS: 4826 in 100mm x 100mm (Hundred millimeter into hundred millimeter) mesh (woven diagonally) including 10 percent extra for laps and joints laid with stone boulders weighting not less than 25kg (twenty filve kilograme each as per drawing and technical specification Clause 1301, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per Technical Specification Clause 405. By manual means, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 4 | Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm(Zero point twenty five to zero point thirty kilogram per square metre) on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 5 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70(zero point seven zero)-1.00(one point zero zero) kg/sqm(kilogram per square meter) using mechanical means as per Technical Specification Clause 502, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 6 | Providinglaying and rolling of open graded premix carpet of 20mm (twenty millimeter) thicknesscompossed of 13.2mm to 5.6 mm(thirteen point two millimeterto dive point six millimeter) aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rollingwith three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat either Type A as per technical Specification Clause 508. By mechanical means bitumen (S-90)/VG-10,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 7 | Providing and laying seal coat sealing the voids in bituminous surface laid to the specified levels, grade and cross fall usingType B as per technical specification clause 510 by mechanical means bitumen (S-90)/VG-10, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
May 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender