Military Engineer Services-MES has published Tender For Ge U(N) 14 2023 24 Repair To Flooring Plastering In Md Otm Accn Of Provost Sub Area Adjoining Area And Repair To Plumbing Sanitary Petty Repair Md Otm Accn Of R Centre Convey Ground Adjoining Area Under Age Br I Of Ge(North) Udhampur. Submission Date for this Tender is 14-06-2023. Flooring Work Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Jun-2023 | corrigendum | BOQ | 07-06-2023 |
| 2 | 07-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-06-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plasteron brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. ,complete all as specified and directed by the Engineer-in-Charge. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement and with using Water proofing compound .(Water proofing compound shall be measured and paid sepratly ) ,complete all as specified and directed by the Engineer-in-Charge. |
| 3 | M&L for rendering 10 mm thick in cement mortor 1:6 on fair face on brick/concrete surfaces and finished even and smooth without using extra cement ,complete all as specified and directed by the Engineer-in-Charge. |
| 4 | M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered of wall ,complete all as specified and directed by the Engineer-in-Charge. |
| 5 | M&L two coats of oil bound distemper over a coat of primer over two coats of approved2mm thickwall care putty over and including preparation of new plastered surfaces of wall ,complete all as specified and directed by the Engineer-in-Charge. |
| 6 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework andrecast concrete articles all as specified. |
| 7 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built inCM(1:6) with old size bricks complete all as specified and as dircted. |
| 8 | All as per item No. above herein before, but except bricks. Note-Old bricks obtained against dismantling shall be used. |
| 9 | M&L half brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built inCM(1:6) with old size bricks complete all as specified and as dircted. |
| 10 | Dismantling water tanks ofexceeding 500 & not exceeding 1000 ltrs and removing to store, complete all as specified and as directed. |
| 11 | Dismantling water tanks ofexceeding 1000 & not exceeding 2000 ltrs and removing to store, complete all as specified and as directed. |
| 12 | M&L in repairs for 500 ltrs capacityRotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 13 | M&L for 1000 ltrs capacityRotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layer white in colour (inside outside) hoisted and fixed in position incl inlet, outlet and overflow connection nipple of suitable sizecomplete all as specified and as directed. |
| 14 | Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed. |
| 15 | Disconnection of existing tanks, setting side for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacityexc 500 to n.exc 1000 ltr and includingendorsed the ward " CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge. |
| 16 | Disconnection of existing tanks, setting side for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacityupto and including 500 ltrs and endorsed the ward " CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge. |
| 17 | Description all as per abovehere in before but of capacity exc 1000 ltrs and upto & including 2000 ltrs and endorsed the word" " CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge. |
| 18 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in position complete all as sp[ecified and directed. |
| 19 | S&F ball brass valve 25 mm dia high pressure with polythene float and fly nut complete all as specified and directed. |
| 20 | S& F 25mm Gun metal, global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and as directed. |
| 21 | S& F 20 mm Gun metal, global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair ,complete all as specified and directed by the Engineer-in-Charge. |
| 22 | S& F 40 mm Gun metal, global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair ,complete all as specified and directed by the Engineer-in-Charge. |
| 23 | S&F 15 mm Stop valves, brass, fancy type with flange, chromium plated with long shankandcup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends foriron pipe orfor unions and fixed. Make : Jaquar cat part No.CQT-23083, Cera- CP 127 oras approved by GE. |
| 24 | S&F Stop valve 15mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms) complete all as specified and as directed. |
| 25 | S&F in repair Stop valve 15mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms) complete all as specified and as directed. |
| 26 | S&F Angle valve, brass, chromium plated, fancy type,with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar cat part No- CON-053KN, Cera- CP 108 |
| 27 | S&F in repair Angle stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) complete all as specified and as directed. |
| 28 | Taking up/downsteel tubing and connections including cleaning for refixing or removal to store 15mm bore pipes ,complete all as specified and directed by the Engineer-in-Charge. |
| 29 | Taking up/downsteel tubing and connections including cleaning for refixing or removal to store 20 mm bore pipes ,complete all as specified and directed by the Engineer-in-Charge. |
| 30 | Taking up/downsteel tubing and connections including cleaning for refixing or removal to store 40 mm bore pipes. |
| 31 | S&F 15 mm bore steel water Tubing "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors ,complete all as specified and directed by the Engineer-in-Charge. |
| 32 | ditto but except pipe ,complete all as specified and directed by the Engineer-in-Charge. |
| 33 | S&F 20 mm bore steel water Tubing "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors ,complete all as specified and directed by the Engineer-in-Charge. |
| 34 | ditto but except pipe ,complete all as specified and directed by the Engineer-in-Charge. |
| 35 | S&F 40 mm bore steel water Tubing "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors ,complete all as specified and directed by the Engineer-in-Charge. |
| 36 | ditto but except pipe ,complete all as specified and directed by the Engineer-in-Charge. |
| 37 | M&L for cutting chases in Stone concrete block or slab, walls , pinningin , making good to facing where requiredand pointing in cementmortar 1:3 to ends of edges of landingsteps, cills, sunshed, shelves, lintels, etc ; and cutting chease for watertubing or concealedconduit wiring , etc, and making good cutting not exc 10 cm girth ,complete all as specified and directed by the Engineer-in-Charge. |
| 38 | S&F PVC nahani trap with grating to 75mm bore including jointing to waste pipe fixed in cement complete all as specified and as directed. |
| 39 | S&F in repairs Soap dish, Vitreous SS, approximate size 160x160x90mm complete all as specified and as directed. |
| 40 | S&F in repair of 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 41 | S&F Vitreous china wash down water closet (pedestal pattern) whitecomplete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair,complete all as specified and asdirected. |
| 42 | S&F Plastic water closet seat cover, closet pattern with flat bottom and coverand incl mild steel chromium plated or aluminum hinges device complete all as specified and as directed. |
| 43 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete incl trap set in and provision of lime concrete filling in sunken portion complete all as specified and directed. |
| 44 | S&F in repairwater closet Vitreous China, semi-pedestal pattern (Anglo-Indian Type) whitecomplete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair,complete all as specified and asdirected. Make-CERA cat part No. 2080(Camelia), Jaquar –CNS-WHT-WH 10 or equivalent of any approved make as approved by GE. |
| 45 | S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed. |
| 46 | S&F Vitreous China wash basin, white, flat back, size 580x450mm (for Hospital use) excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and as directed. |
| 47 | S&F flush pipe with rubber washer PVC 32 mm dia for low level cistern pipes, complete all as specified and as directed |
| 48 | S & F for waste pipe of dia 40mm for WHB/Sink, complete all as specified and as directed. |
| 49 | S&F in repairs 32mm bore diaof CP brass waste coupling suitable for WHB, complete all as specified and as directed. |
| 50 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes; including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 51 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes; including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 52 | S&F Push tap 15mm bore any colour of PTMT screwed for iron pipe suitable for urinals. (min. weight 15mm-50gms) complete all as specified and as directed. |
| 53 | S&F in repair Bip tap 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm - 90gms) complete all as specified and as directed. |
| 54 | S&F in repair Bip tap fancy type 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-105 gms) complete all as specified and as directed. |
| 55 | S&F in repair Bip tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms) complete all as specified and as directed. |
| 56 | S&F in repair Pillar taps15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms)complete all as specified and as directed. |
| 57 | S&F Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-120gms)complete all as specified and as directed. |
| 58 | S&FTowel rail 450mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 170gms) complete all as specified and as directed. |
| 59 | S&F Bib taps, brass, chromium plated, fancy type,long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar cat part No.- CON-037KN, Cera-CP 103 complete all as specified and as directed. |
| 60 | Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repairs c,complete all as specified and directed by the Engineer-in-Charge. |
| 61 | Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed in repair,complete all as specified and directed by the Engineer-in-Charge. |
| 62 | S&F Gratings, fixed in repairs complete all as specified and as directed. |
| 63 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 64 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm |
| 65 | S&F in repairs Brass CP shower rose 125mm size shower arm 15mm size, 195mm long with bend of 45 degreee with flange complete all as specified and as directed. |
| 66 | Dismantling of PVC rain waterpipeof any size anydescription all as specified. |
| 67 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 68 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 69 | S&F PVC (SWR) bends 75 mm bore any radius with oveal & acces door complete all as specified and as directed. |
| 70 | S&F110 mm bore PVC (SWR) bends with access door any radius,all as specified and directed by the Engr-in-charge. |
| 71 | S&F PVC (SWR) junction single, (Single T/Y jn with Access door)75mm equal or unequal complete all as specified and as directed. |
| 72 | S&F PVC (SWR) junction single, (Single T/Y jn with Access door) 110 mm equal or unequal complete all as specified and as directed. |
| 73 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by the Engineer-in-Charge. |
| 74 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mmof an colourhaving tensile strength of 550 Mpa(AZ-150) as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed by the Engineer-in-Charge. |
| 75 | S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mmof an colourhaving tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall/ valley gutter/ Barge board, fixed with self tapping screwscomplete all as specified and directed by the Engineer-in-Charge. |
| 76 | Demolition/Dismantling ceiling boards,fibre pulb insulation etc or insulation boards/slabs/blankets,any thickness, including cover andgrid,complete all as specified and directed by the Engineer-in-Charge. |
| 77 | S&F false ceiling with cement designer tile white painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross"T" at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearingcapacity of 12 kg/sqm, and refixed all exesting electric wiring and fixtures all complete at all heights as per direction of Engineer-in -Charge. |
| 78 | S&F in repairs of false ceilingboards of Everest Fibre Cement Designertile white painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 1220mmx 1220mm/ 1195mm X595mm/1220mmX610mm or any other suitable size as per existing grid frame work and any one of the design (occeanic , lake & hill, cascade or electra) in true horizontal level, suspended on existing inter locking metal gridincluding required cutting/making opening for services like fixed over existing grid inluding necessary scaffolding etc and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engr-in-charge. Make-Everest/Visakha . |
| 79 | ,-ditto- but except ceiling board removing and refixing existing board |
| 80 | Supplying and fixing in repairs grid frame suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross"T" at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 605 mm X 605 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearingcapacity of 12 kg/sqm, and refixed all exesting electric wiring and fixtures all complete at all heights as per direction of Engineer-in -Charge |
| 81 | Supplying and fixing in repairs grid frame suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross"T" at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 605 mm X 605 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearingcapacity of 12 kg/sqm, and refixed all exesting electric wiring and fixtures all complete at all heights as per direction of Engineer-in -Charge |
| 82 | Demolition of un-reinforced cement concrete in ground floors for levelling ofand pavings not exceeding 15 cm thicknessincluding floor finish complete all as specified and directed by Engr-in-Charge |
| 83 | M&L for 50 mm thick Cement concrete type C-2 , 1:3:6 using 40mm graded aggrigate Finishing surfaces of concrete topping even and fair finishes (without using extra cement) as in plinth protection/leveling course all as specified and directed by Engr-in- Charge. |
| 84 | M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base to receive floor roughfinishes complete all as specified. |
| 85 | S&F in reapirs MS powder coatedcurtain rods withbracketfixed to wall with suitable screws and onion type end brackets all as per approved design/colour/pattern fixed ,complete all as specified and directed by the Engineer-in-Charge. |
| 86 | S&F Aluminium powder coated (match with door shutters) Hydraullic door closer suitable for aluminium glass door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed. Make- Godreg/Jindal ,complete all as specified and directed by the Engineer-in-Charge. |
| 87 | S&F Mortice lock with two lever MSbody (vertical type) 100mm length of latch with 3 set of keys fixed in door shutter with proper in position complete all as specified. |
| 88 | Taking down Chowkats or frames exc 1.5 Sqm butnot exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified anddirected |
| 89 | -ditto-but n.exc 1.5 Sqmeach complete all as specified and as directed. |
| 90 | Taking down shutters of any descp n.exc 1 sqm each complete all as specified and as dircted. |
| 91 | Taking down shutters of any descp exc 1 sqm but n.exc 2 sqm complete all as specified and as directed. |
| 92 | ,-ditto- but exceeding 2 Sqm each complete all as specified and as dircted. |
| 93 | Refixing in same openingshutters of any descp exc 1 sqm but n.exc 2 sqm complete all as specified and as directed. |
| 94 | Refixing in same openingshutters of any descp exc 2 sqm complete all as specified and as directed. |
| 95 | S&F 125x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fastetc., and back recess to be filled with pcc (1:3:6) type C-oconcrete complete all as specified and as directed. |
| 96 | S&F 105x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fastetc., and back recess to be filled with pcc (1:3:6) type C-oconcrete complete all as specified and as directed. |
| 97 | Cutting holes in brick walls built in cement mortar and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc hail but n.exc one brick complete all as specified and as directed. |
| 98 | S&F 30 mm thick Flush shutter, solid core construction, with block board core and plywood face panels,commercial type on both sides ( Sample of Doors Bldg No. NP-23 HQ 71 Sub Area)complete all as specified and as directed. |
| 99 | M&L 35 mm Glazed and skeleton shutters, 2nd class H.W open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 100 | S&FFactory Made Solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on theront face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the frontace & 2mm Plain colour PVC Sheet on back facecomplete all as specified and as directed. |
| 101 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 102 | S&F floor door stoper of 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed. |
| 103 | S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on olt plate and two on staple plate and fixed complete all as specified and as directed. |
| 104 | S&F in repairs MS helical door spring 300mm size including roller and roller platefixed to wooden or steel frames with welding/fitted with screws etc, complete all as specified and as directed. |
| 105 | S&F Aluminium powder coated (match with door shutters) Hydraullic door closer suitable for aluminium glass door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed complete all as specified and as directed.. Make- Godreg/Jindal |
| 106 | S&F 150 mmAluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 107 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 108 | S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 109 | S&F in 3mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 110 | S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 111 | S&F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperature 1.40 mmand fixed with stainless steel wire staples, ,complete all as specified and directed by the Engineer-in-Charge. |
| 112 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 113 | S&F 18/19 mm thick Prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed withcrews to timber frame work as in Cupboard, kitchen cabinet or similar work etc including provn of 6mm thick teak wood lipping alround the board/ shutter complete all as specified and as directed. |
| 114 | S & F 30mmContinuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 115 | S&F Aluminium handles, cast type, anodised 100mm long complete all as specified and as directed. |
| 116 | S&F 100 size Hasp and staple, Alu Anodised,including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 117 | S&F magnet catchers 50mm steel plate MS body and striking plate incl letting in & fixed complete all as specified and as directed. |
| 118 | S&F in repairs stainless steel multipurpose basket in wooden drawers/partitions for storing rations of various types made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc fixed, complete all as specified for modular kitchen complete all as specified and as directed. |
| 119 | S&F in repair stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen, complete all as directed by Engr-in-Charge. |
| 120 | S&F in repairs telescopic drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, for modular kitchen, complete all as specified and as directed. |
| 121 | Hacking out old broken glass (any thickness, size, quality or description) from metal/ Aluminium frames including punching or drilling out old glazing pins/ spring clips ,complete all as specified and directed by the Engineer-in-Charge. |
| 122 | S&F in repairs5.0 mm thick tinted Sheet glass, ordinary quality and glazing with oil putty/ Aluminium rubber beading in squaresexceeding 0.5 Sq.M in each pane ,complete all as specified and directed by the Engineer-in-Charge. |
| 123 | S&F in repairs 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.M in each pane ,complete all as specified and directed by the Engineer-in-Charge. |
| 124 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as sp[ecified and directed. |
| 125 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match including 15 mm screed bed 1:4 cement mortar complete all as sp[ecified and directed. |
| 126 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed with spacer and laid with epoxy grout in neat cement slurry and pointedto matchincluding 15 mm screed bed 1:4 cement mortar complete all as sp[ecified and directed. |
| 127 | M&L Glazed ceramic tiles 300x450x7 mm to 8mm thick in vertical surfaces such as skirting, dadao and risers to steps over 10 mm thick in CM(1:4) incl taking down from existing surfaces complete all as sp[ecified and directed. |
| 128 | S&F Coloured Glazed ceramic tiles in vertical surfaces600x300mmx7mm thick and above nearest sizes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm screed bed in 1:3 cement mortar complete all as specified and as directed. |
| 129 | Demollition of stone slabs and tiles laid bedded and pointed in any mortarof any description or thickness in floors, aprons etc complete all as sp[ecified and directed. |
| 130 | M&L for Machine pressed precast conrete interlocking paver block with grey cement and pigmentany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and inclusive 30 mm thick sand filling complete all as specified and directed by Engr-in-Charge |
| 131 | Machine cut kota stone slab flooring 18-20mm thick over 15 mm th cement screed in CM 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as sp[ecified and directed. |
| 132 | ,- ditto-as above but as in skirting/dado etc. ,complete all as specified and directed by the Engineer-in-Charge. |
| 133 | M&L marble strip cut to width n.exc 100mm wide fixed as border in floor, stair case walk ways etc., incl rubbing and polishing complete over and including screed bed 20 mm thick in CM 1:4 including demolition and dismantling complete all as specified and directed |
| 134 | S&F reflective chequered ceramic tiles 30 cm by 30 cm by 9mm-10 mm thick, with grey cement andpigments, set, jointedover 15 mm thick screed bedin CM 1:4, and pointed in neat cement slurry in floors complete all as sp[ecified and directed. |
| 135 | M & L for Red/Black granite(of any type) stone slab 16mm thick machine cut as in window cill/counter top slab bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edg complete Including10mm thickbacking coat CM 1:4complete all as specified and directed. |
| 136 | Demolition of un-reinforced cement concrete in roofs,floors ( other than ground floors), beams, staircase, landing, chajjas and similar suspended work.ofand pavings not exceeding 15 cm thickness(below or above ground level) complete all as specified and as directed. |
| 137 | M&L for 25 mm thick plain cement concrete1:2:4 type B1(using 20 mm graded stone aggregate) as in subbase of flooringall as specified and as directed. |
| 138 | Providing and laying water proofing treatment to sunken portion of WCs, bathrooms, roof etc by applying two coat of slurry of cement @ 0.488kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253kg/sqm this layer allowed to air cure for 4 hrs then applying slurry of cement @ 0.242 kg/sqm mixed withacrylic based polymer modified cementitious composite compound @0.126kg/sqm and allowed to aircure for 4 hrs and joints seal with sealing compound as approved by GE.Note:(i) Before laying of lime concrete joints of trap/WC/Soil pipes shall be properly sealed with sealing compound of Roofex/Forre/FOSROC and provn of P or S trap & Nahani /Floor traps with long arm and also provn of spout of 40 mm dia complete all as specified and as directed. |
| 139 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement mortot as in CM 1:3 finishing even & smooth w/o using extra cement, complete all as specified and as directed complete all as specified and as directed. |
| 140 | M&L PVC (SWR) floor trap plain with grating incl. jointing with solvent cement (75 mm bore) complete all as specified and as directed. |
| 141 | M&L in repair 20 mm thick cement plaster on fair face ofbrick/concrete surface including repair of doubing roof/chajja/facia surfacesin CM 1:3 finished even land smooth without using extra cement over complete all as specified and directed. (Water proofing compound shall be measured and paid sepratly ) |
| 142 | Supply only integral water proofing compound complete all as specified and as directed. |
| 143 | Checking of plumbing work ,joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry/plumbingwork and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows, water taps, stop cocks, water tank, water supply pipe line etc. by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional, complete all as specifiedand directed.Note : 1. Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.2. The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and allcomplaint will be rectified by the contractor with insame daythan the returned the complaint slip after completion of complaint and get recipt from concered JE/Enge-in-charge .If he fails to complete the workwith in same day then recovery will be made @50.00 per day . |
| 144 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
