Public Works Department-PWD has published Tender For Replacement Of Worn Out Exhaust System In Kitchen At Ihbas, Dilshad Garden, Delhi. Submission Date for this Tender is 30-05-2023. Gardening Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and commissioning of factory built floor mounted double skin type horizontal / verticalExhaust air system units made of 25mm thick panels consisting of pre plasticized G.I. sheet casing of thickness 0.6mm in outside & inside layer with polyurethane foam (PUF) insulation injected between them complete with SISW backward curved centrifugal blower of following air handling capacity & static pressure with suitable rating TEFC squirrel cage induction motor of efficiency class IE2 for operation on 415 ± 10% volts, 50Hz, 3 Phase AC supply, belt drive package, canvas connection at inlet & wiremesh at outlet of the unit, necessary vibration isolation arrangement, connectionsetc. complete as reqd at site. |
| 2 | Air Qty-8000 CFMat 50mm static pressure |
| 3 | Air Qty-5000 CFM at 50mm static pressure |
| 4 | Supply, Installation, Testing and commissioning of factory built floor mounteddouble skin type horizontal/verticalair washer system units made of 25mm thick panels consisting of pre plasticized G.I. sheet casing of thickness 0.6mm in outside & inside layer with polyurethane foam (PUF) insulation injected between them, 20 Gauge SS-304 sumphaving makeup, overflow, quickfill, drain connection with valves complete with DIDW centrifugal forward curved fans, suitable TEFC squirrel cage induction motor of IE-2 efficiency for operation on 415 ± 10% volts,50Hz, 3 Phase AC supply with drive package, single phase pump monoblock pump for water circulation, 200 mm deep cellulose pad for adiabatic cooling having GI/ FRP spray distributor, 50 mm thick prefilter with synthetic and washable media in Aluminium frame, GI/CPVC pipe line for suction and discharge, SS strainer on water suction line, two bend PVC eliminator, anti vibration mountings, canvass connection etc. complete as reqd. at site. |
| 5 | 15000 CFM at 50mm wg static pressure |
| 6 | 10000 CFM at 50mm wg static pressure |
| 7 | Supplying& fixing/laying of following sizes of 1.1 KV grid multicore copper/ Aluminium conductor XLPE insulated and fire retardant PVC sheathed armoured cable as per IS 7098 (part-1)1988 on surface of wall/ceiling/on existing cable tray complete as required. |
| 8 | 4Cx10 Sqmm- Copper Armoured |
| 9 | Supply, laying, fixing, testing and commissioning ofrigid PVC drain waterpiping complete with fittings & support |
| 10 | 25mm dia |
| 11 | 32mm dia |
| 12 | Supply and Fixing of Ball valve Made from Gun metal casing and SS-304 stem complete etc as reqd at site |
| 13 | 25mm dia |
| 14 | 32mm dia |
| 15 | Supplying, installation, testing & commissioning of cubical modular type LT panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized design having bus bar chamber duly fabricated from CRCA sheet steel of 2 mm thick for frame, back, sides, partition & doors and 3mm thick for glad plate duly powder coated in approved shade including cleaning & finishing complete with 7 tank process complete with200 Amp capacity extensible type four strip aluminium alloy bus bars of hight conductivity, DMC/ SMC bus bar supports having short circuit withstand capacity of 31 MVA for "1" Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars, control wiring with1.5 sq. mm. PVC insulated copper conductor single core cable, in & out connections and providing & fixing following switch gears therein including dismantling of existing electrical panel where ever exists after opening of in & out connections and making good the damages etc. complete as required. |
| 16 | (a) Incoming: 1No.- 160A, TP, 25KA MCCB (Ics=Icu =100%)withThermal Magnetic release with adjustable settinghaving SC, OL protection with Neutral link, Rotary handle and spreader terminal. 1No.- 3 phase Intelligent multifunction digital meter to read V, A, KVA, KWH, PF Hz etc. with 3 Nos. resin cast CTs of 2000/5 A class 1.0 accuracy and 15 VA burden and with 3 Nos 2A, 10KA, "C" Curve back up MCB. 1 Set- RYB Phase indication LED lamps with 2A, 10KA, "C" Curve back up MCB, breaker ON/OFF indicating light with 2A, 10KA, "C" Curve backup MCB b) Outgoing: 7Nos.- 63A, TP, 25KA MCCB (Ics=Icu =100%)withThermal Magnetic release with ajustable settinghaving SC, OL protection with Neutral link, Rotary handle and spreader terminal. |
| 17 | 3Nos.- DOL starter suitable for 10 HP induction motor complete with contactor, relay, SPP, push button, indicating light, digital ammeter with selector switch & CT,s 4Nos.- DOL starter suitable for 5 HP induction motor complete with contactor, relay, SPP, push button, indicating light, digital ammeter with selector switch & CT,s |
| 18 | Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as per specifications, requirement, standard and drawings. |
| 19 | 22gauge (0.8 mm) |
| 20 | 20gauge (1.0 mm) |
| 21 | Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
