Tender For Upgradation Of Electrical Network System Under Atal Industrial Infra. Mission In Ia Rania Site-1 And Ii, Kanpur.
Tender Value
43.15 Lakhs
Estimated cost
Bid Submission
26 May 2023
0 days left
EMD
86350
Bank guarantee accepted
Document Fee
2280
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rania → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of Electrical Network System Under Atal Industrial Infra. Mission In Ia Rania Site-1 And Ii, Kanpur.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing ofLED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 90 watt confirming to IP 66 protection complete in all respects (With 5 Year Gurantee (3+2) Three year all type (including Damge & Theft) Repair And Maintenace & Extra Two Year Gurantee). Catt. AA as per UPPWD Sch. No.1423 (Bajaj /Philips/Crompton/Wipro Make) |
| 2 | Supply & Fixing of 32 MM Dia 1.20 Mtr long G.I Pipe Bracket For Fixing of LED lights complete in all respects with clampetc.As per Direction E/I. |
| 3 | Supply & fixing of D clamp of size 50x6 mm flat iron on ST poles with nuts and washers etc. complete in all respect as per UPPWD Sch. No. 623 |
| 4 | Supply & fixing of 100 x 110 mm shackle insulator 100 x 80 mm pin insulator including GI volt spindle, nuts etc. as pre UPPWD Sch. No. 621 |
| 5 | Supplying and wiring of 4 sq. mm Copper conductor PVC insulated unsheathed single core cable including all T&P men and material for proper completion of work.(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 6 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect.UPSIDC Sch. No.E10.08 |
| 7 | Supply & wiring of submain with 2 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P reuired for proper complation of the work as directed as site byEngineer I/C as Per UPPWD sch No. 289(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 8 | Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501 & 507(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 9 | Supply & laying 25 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501 & 507(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 10 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (c) 16 sq. mm 2 core |
| 11 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 50325 sq. mm 3.5 core |
| 12 | S/F of palm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 13 | S/F ofpalm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 50425 sq. mm |
| 14 | S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 15 | S/B of 600x600x6mm GI plate vertical for earthing with its top at least 3 M. below ground levelcomplete with20 mm dia. GI pipe and funnel for watering andone earthing leads of no. 8 to 10 SWG GI wire in 15 mm diaGI pipeupto switch board (from appron to switch board the cost of GI pipe snd GI wire be extra)30 CM square C.I. framewith hinged cover masonary housingalternate layers of charcoal /Coke and saltat least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 702 |
| 16 | Supply and laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716 |
| 17 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(d) (15 Amp. TPN) |
| 18 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(f) (40 Amp. TPN) |
| 19 | Supply and erection of steel tubularpole 410-SP-29, 9 m long (Bottom Galavenised) ,129 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level. |
| 20 | Sypply & laying of 90 mm dia I/D DWC HDPE pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. |
| 21 | Supply and fixing of 16 mtr. High mast shaft of approved make with rising system hot dip glavanizedinside& out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferntial weld, with accessoies for high mast such as head frame suitable for12 limminaries & its control gear boxes 1.5 HP power tool moter 3 point suspension system with steel wire rope 6 mm. dia double drum winch including making suitable foundation as per manufature drawing/ site requirment along with foundation bolts nuts, washer, anchor plates etc complete in all respects(With three year All Type Repair & Maintenance) . as per UPPWD Sch. No.652 (Bajaj /Philips/Crompton/Wipro Make) |
| 22 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 200 watt confirming to IP 66 protection complete in all respects (With 5 Year Gurantee (3+2) Three year all type (including Damge & Theft) Repair And Maintenace & Extra Two Year Gurantee) . Catt. AA as per UPPWD Sch. No.1455 (For High Mast 16 Meter)(Bajaj /Philips/Crompton/Wipro Make) |
| 23 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 150 watt confirming to IP 66 protection complete in all respects(With 5 Year Gurantee (3+2) Three year all type(including Damge & Theft) Repair And Maintenace & Extra Two Year Gurantee). Catt. AA as per UPPWD Sch. No.1454 (For High Mast 16 Meter) (Bajaj /Philips/Crompton/Wipro Make) |
| 24 | Supply and laying of 16 sqmm. 4 core, aluminium conductor PVC insulated, armoured served, sheathed cable 110 volt grade of Havell\"s make as complete in all respects including all T&P men materials required for proper completion of work. as per UPPWD Sch. No.501(i) |
| 25 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(e) (25 Amp. TPN) |
| 26 | Charges for maintenance of entire electrical system of road lighting to cover general supervision for execution of work during the periodof AMC excluding the supply and fixing/installation of all materials. (01 Electrician & 01 Helper ) |
| 27 | Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint on length of above 10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work.UPSIDC Sch. No.20.06 |
| 28 | Dismantling & re-grouting of Street liht 12 Tilt/sick bend/STP pole in 1:3:6 ratio cement concrete with stone pad including stranthening of pole by providing additional 04 nnos. Support of 65X65X6mm or higher size MS angle in suitable length with the help of welding/cutting as per tecnical specification. Annx-2 |
| 29 | Dismantling & Fixing of LED/Sodium lights on Repair Pole as per UPPWD Sch. No. 1428 |
| 30 | Supply and erection of doble pole 410-SP-56, 11 m long, 241 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level.UPSIDC E02.10 |
| 31 | Supply and fixing of 11 KV Disc & Disc fittings complete.UPSIDC E03.06 |
| 32 | Supply and fixing of 11 KV pim insulator complete.UPSIDC E03.07 |
| 33 | Supply and fixing of 100 mm dia G.I.pipes B,class for climbing up the cable from ground to over head line including all accessories,materials,labours and T&P required for proper completion of work as per specification.UPSIDC E25.01 |
| 34 | Supply and fixing of anticlimbing device fabricated from G.I. flat of 25 mmX6 mm size in a shape of ring of the pole size,having G.I.flat pointed fins of length 225 mm in 8 nos and also barbed wire in 200 mm length above the said ring including material. UPSIDC E26.01 |
| 35 | Supply and fixing of danger board fabricated from 10 gauge M.S.sheet as per I.E.Rules.UPSIDC E27.01 |
| 36 | Supply & fixing of straight MS Channel 100 x 50 mm 1.15 M long complete as per SIDC Sch. No. 36.02 |
| 37 | Supply & fixing of clamp suitable for securing the above channel complete as per SIDC Sch.No.3(4) |
| 38 | Supply,sagging,tensioning,jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including material,men an T&P for proper completion of work.UPSIDC E.10.(a) |
| 39 | Supply and fixing of 11KV TPMO Switch of 400 amps. Copmlete in all respect as per direction of Engineer in charge complete incuding all T&p, men and material required for proper completion. |
| 40 | S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc.(Relco/Azad/approved by UPPCL) |
| 41 | Supply, installation, testing & commissioning of outdoor type Al. wound oil cooled transformer of rating 25 KVA, 11/0.433 KV complete as per IS-1180-2014 Level-I as per approved list of UPPCL |
| 42 | Supply & laying 70 sq mm 3 core Al. conductor XLPE insulated PVC bedded galvanised flat steel striparmoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 506 & 507 (Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 43 | S/F of Heat Shrinkable jointing kit suitable for XLPE 11 KV HT cable outdoor type including all materials, labour and T&P required for proper competion of work. SIDC sch. No. ER 123 |
| 44 | Making plinth for installation of transformer of size 1x1.5x1.10 M plinth complete with excavation base concrete with 1:4:8 (padding) first class brick work in ratio 1:3, CC work and plastering as per design. |
| 45 | S/F welded wire mesh fencing of 5x3x2.4 mtr. And 2x2.4 M gate for transformer including excavation base concrete brick work back filling etc. complete in all respects as per UPPWD Sch. No. NS90 |
AI Tender Summary
Tender Timeline
May 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender