Tender For Construction Of New Virtual,Library,Comp.Room Building At. Zpps Yenki Tq. Udgir Dist. Latur
Tender Value
14.03 Lakhs
Estimated cost
Bid Submission
02 Jun 2023
0 days left
EMD
14032
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
udgir → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Virtual, Library, Comp.Room Building At. Zpps Yenki Tq. Udgir Dist. Latur
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingthe excavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means. SSR Item No.21.01 |
| 3 | Excavation for foundation in hard murum including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, water ingincluding shoring and strutting etc.complete. (Liftupto1.50m) By Manual Means.SSR Item No.21.05 |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork,laying / pumping, compacting, roughening them if special finish is to beprovided, finishing if required and curing complete. SSR Item No.24.01 |
| 5 | Providing and laying in situ /Ready Mixcement concreteM-20oftrap / granite /quartzite/ gneissmetal for R.C.C. workin foundationslike raft, strip foundations, grillage andfootings of R.C.C. columns andsteel stanchionsetc. including bailing out water,Steel centering formwork, laying/pumpingcover blocks, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete..SSR Item No.25.11 P. No. 222 |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. columns as perdetailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing theformed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if specialfinish is to be provided and curing etc. complete,(Excludingreinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR Item No.25.31 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels asper detailed designs and drawings or as directed including steelcentering, formwork, cover blocks, laying/ pumping ,compactionand roughening the surface if special finish is to be provided and curingetc. complete. (Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete.SSR Item No.25.50 |
| 8 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) SSR Item No.25.50 |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. SSR Item No.25.70 |
| 10 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete SSR Item No.26.33 |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/quartzite/ gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovided andcuringcomplete.(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessor basedPLCwithSCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)SSR Item No.26.17 |
| 12 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. SSR Item No.27.03 |
| 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR Item No.27.03 |
| 14 | \"Providing and fixing steel frame door of angle 40 x 40 x 5 mm with 16 mm dia. mild steel barshorizontallyat10cmc/cforventilatorportionincludingironholdfastforthefixing shutters including welding, painting, finishing etc. complete.\" SSR Item No 39.36 |
| 15 | Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc .SSR Item No.39.31 |
| 16 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metreasperdrawingincludingfixturesnecessaryweldingandpaintingwithonecoatof anticorrosive paint and two coats of oil painting complete.SSR Item No.40.02 |
| 17 | Filling in plinth and floors with contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc complete. SSR Item No.21.37 |
| 18 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.SSR Item No.33.40 |
| 19 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. SSR Item No.33.41 |
| 20 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. SSR Item No.32.01 |
| 21 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR Item No.32.04 |
| 22 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. SSR Item No.32.15 |
| 23 | Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish,to concrete, bricksurface, in all positions including scaffolding and curing etc.complete. SSR Item No.32.06 |
| 24 | Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming downetc. complete. SSR Item No.36.02 |
| 25 | Providing and applying washable oil-bounddistemperofapproved colourand shadetooldand new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. SSR Item No.36.11 |
| 26 | Providing and applying two coats of water proof cementpaintof approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. SSR Item No.35.13 |
| 27 | Providing fine cementfinish 1.5mm thick over green plaster surfaceincludingscaffoldingcuringetc. complete. SSR Item No.32.21 |
| 28 | Providing and applying two coats of flat oil paint of approved colour and shade to internal / externalplasteredsurfacesincludingscaffoldingifnecessary,cleaningandpreparingthe surface (excluding primer coat) etc. complete.SSR Item No.35.12 |
| 29 | Add for Name plate |
| 30 | ELECTRICWORK |
| 31 | Supplying and erecting PVC trunking (PVC casing-n capping) of size 25 mm with accessories on wall / ceiling as per specification No: WG-MA/CON. Item No. 1-2-7 |
| 32 | Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/BW Item No. 1-3-1 |
| 33 | Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVCinsulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/ BW Item No. 1-3-1 |
| 34 | Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/ BW Item No. 1-3-2 |
| 35 | Supplying and erecting mains with ISI mark WP 2 x 6 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.Item No. 1-4-3 |
| 36 | Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete..Item No. 1-6-1 |
| 37 | Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete. Item No. 1-6-10 |
| 38 | Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete. Item No. 1-6-2 |
| 39 | Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.Item No. 1-6-11 |
| 40 | Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 12 modules complete duly connected.Item No. 1-6-32 |
| 41 | Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SWItem no 1-7-19 |
| 42 | Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.Item No. 2-1-18 |
| 43 | Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200mmcomplete erected in position as per specification no. FG-FN/CF Item No. 2-10-21 |
| 44 | Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Item No. 1-6-23 |
| 45 | Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW Item no.1-7-26 |
| 46 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.Item No. 2-8-11 |
| 47 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Item No. 5-3-3 |
| 48 | Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Item No. 5-3-7 |
| 49 | Royalty -Sand |
| 50 | Royalty -Murum |
| 51 | Concrete - Compressive strength |
| 52 | Laboratory test-Brick Masnory Water Absorption |
| 53 | Add GST. on Non-Residencial Building @ 18% |
| 54 | Add Labour [email protected]% |
AI Tender Summary
Tender Timeline
May 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender