|
| 1 | E/W in excavation by manual means in trenches for foundations, drains, pipes, cables etc (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed including all dewatering involved. |
| 2 | In all kinds of soils |
| 3 | Ordinary Rocks |
| 4 | Earthwork in excavation by mechanical means (Hyd. Excavator) over areas (exceeding 30cm in depth 1.5 mtr. in width as well as 10 sqm. plan) including disposal of excavated earth lead upto 50 mtr. and lift upto 1.5 mtr. disposed earth to be leveled and neatly dressed including all dewatering involved. |
| 5 | In all kinds of soils |
| 6 | Ordinary Rocks |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 8 | Demolishing of cement concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead. |
| 9 | Providing and laying hand packed stone soling 50 mm nominal size/ stone boulders of size range [5-20cm] in the req. thickness including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 11 | 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 12 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 14 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 15 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 16 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 17 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level |
| 18 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 20 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete 40mm thick with 20 mm nominal size stone aggregate. |
| 23 | Providingand layingdamp proofcourse40mm thick withcementconcrete 1:2:4(1 cement :2 coarse sand :4 graded stoneagg)12.5 mm nominalsizeandcuringcomplete |
| 24 | Dismantlingoldplasterorskirtingrankingoutjoints andcleaningthesurfacefor plasterincludingdisposalofrubbishto thedumpinggroundwithin50 metres lead |
| 25 | 12mm thickcementplasterof mix (1:4) (1 cement :4 fine sand) |
| 26 | 12mm cement plasterfunishedwithfloatingcoat of neat cementofmix1:3(1 cement :3 finesand ) |
| 27 | finishingwallswith water proofingcementpaintof required shade on newwork (two or morecoatsapplied |
| 28 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brickhoney comb shaft with common burnt clay (non modular) bricks of classdesignation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m longcomplete as per standard design. |
| 29 | Demolishing Brick work manually / by mechanical means including stacking of serviceable materialand disposal of unserviceable material within 50 metres lead as per the direction of Engineer-in-charge in cement mortor. |
| 30 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 M (stacks of cleaned bricks shall be measured) from brick work in cement mortar, |
| 31 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 32 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 33 | Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution including all dewatering charges if any (complete job).(by Rope and bucket method)(Photographic evidence before and after execution be provided with work done estimate.) |
| 34 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 35 | Providing and fixing soil waste & vent pipe |
| 36 | PVC Pipe. 110mm dia (10 feet unit Length) |
| 37 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 38 | PVC Bend 110mm/75 mm dia |
| 39 | PVC Tee 110mm/75 mmdia |
| 40 | PVC Collar 110mm dia |
| 41 | PVC Collar 75mm dia |
| 42 | PVC trap 110mm dia |
| 43 | PVC trap 75mm dia |
| 44 | PVC Socket 110mm/75mm dia |
| 45 | PVC door junction 110mm/75 mm dia |
| 46 | Dismantling barbed wire or flexible wire rope in fencing including makingrolls and stacking within 50 meters lead. |
| 47 | Fencing with angle iron post placed at required distance embedded incement concrete blocks, every 15th post, last but one end post and cornerpost shall be strutted on both sides and end post on one side only andprovided with horizontal lines and two diagonals interwoven withhorizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum),between the two posts fitted and fixed with G.I. staples, turn buckles etc.complete. (Cost of posts, struts, earth work and concrete work to be paidfor separately). Payment to be made per meter cost of total length ofbarbed wire used. |
| 48 | With G.I. barbed wire |
| 49 | Mild steel barbed wire |
| 50 | Dumping of stone (excluding cost of stone) in horizontal on level. |
| 51 | Dumping of stone (excluding cost of stone) on slopes behind pitching. |
| 52 | Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution including all dewatering charges if any (complete job).(through washout arrangment)(Photographic evidence before and after execution be provided with work done estimate.) |
| 53 | Supplying of bedding itemsat filtration plants: for ward and watch employees. |
| 54 | Bedding Set (Mattress and Quilt incl pillow 01set) |
| 55 | Supply of Blankets upto site of work. |
| 56 | Supplyof Search Torches for filtration plants. |
| 57 | Providing/ supply of Excel matting upto site of work including all cariiages and as directed by the Engineer In charge. |
| 58 | Providing/ supply of Utensils upto site of work for night staff posted at filitration plantsincluding all cariiages and as directed by the Engineer In charge. |
| 59 | Providing and fixing Flex Sign Boards for use as banners in official events and inaguration of various work. The content of the board will be provided by the AEE Concerned |
| 60 | Supply of solar light |
| 61 | Supply of carpet as instructed by the Engineer Incharge/AEE |
| 62 | Emergent repairs to Tanker Tyre Puncture |
| 63 | Self repairs/Clutch repairs/ Excel repairs including charges for to and fro upto workshop as complete job. |
| 64 | Side mirror (New ones) |
| 65 | Suction pipe |
| 66 | Providing/ supply of thermocol to be laid under matting including all sorts of carriage upto site. (12 mm) |
| 67 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever required Stainless steel AISI-304 (18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap |
| 68 | Providingof Sofa set 3 seater (1 long seat and 2 single chairs) for subdivisional office as approvedby Engineerincharge |
| 69 | Providingof officer chair(high back office chair) for subdivisional office as approvedby Engineerincharge |
| 70 | Providing and supplying of officers table (160x86x76)cm with three drawers and storage cabinet complete as approvedby Engineerincharge |
| 71 | Providingof Table(wall nut) 2.5\"x4\"(2 Noswith glasstop with woodcarrvingas approvedby Engineerincharge |
| 72 | Providing and supplying of Wooden Tea poystandard size as approvedby Engineerincharge |
| 73 | Providing /fixingof crewelflower carvedfency typecurtainsof doublewovenclothstandard size (Do soot fabric) with whitebackliningof whiteclour ofstandardmaterialincludingall fixtures likehooks/ring/rods curtainrocd etc(complete job) as approvedby Engineerincharge |
| 74 | Providing /fixingofcurtainsstandard size ofstandardmaterialincludingall fixtures likehooks/ring/rods curtainrocd etc(complete job) as approvedby Engineerincharge |
| 75 | Providing and supplying ofof standard quality fire wood bukharies (to beused on higherreaches) as approvedby Engineerincharge |
| 76 | Distemperingwith oil bound washasbledistemper of approvedbrand andmanufacture to giveanevenshade on newwork (two or more coatsoverandincludingprimingcoat with waterthennablecementprimer |
| 77 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 78 | Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 79 | Applying priming coat: With ready mixed red oxideZinc Chromate primer of approved brand and manufacture on steel work (second coat) |
| 80 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 81 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 82 | White washing with lime to give an even shade on New Work (three ormore coats) |
| 83 | Distempering with 1st quality acrylic distemper (ready mixed)havingVOC content less than 50 gms/litre, two or more coats on new work ofapproved manufacturer, of required shade and colour complete as permanufacturer’s specifications |
| 84 | Finishing wall with premium acrylic smooth exterior paint with siliconeadditives of required shade on New work (two or more coats applied @1.43 liter/10sqm over and including priming coat of water exterior paintapplied @ 2.20kg/10sqm) |
| 85 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 86 | 1 mm thick |
| 87 | 2 mm thick |
| 88 | Supplying/Laying & shrouding of filter media as per specifications & as directed by the Engineer In charge including all carriages from source to site of work. |
| 89 | Taking out filter media from filter beds manually and segregating the same as per specifications including relaying in filter beds after proper washing all work as complete job including labour charge for laying serviceable material (Filter Media) |
| 90 | Centering and shuttering including strutting, propping etc and removal of form work for: |
| 91 | Foundations, footings, basis of columns etc. |
| 92 | Walls (any thickness) incld. attached pilasters, buttresses, plinth and string courses etc. |
| 93 | Columns, pillar, piers, posts and struts. |
| 94 | Suspended floors, roofs, landings, balconies and access platform. |
| 95 | Lintels, beams, plinth beams, cantilevers, etc. |
| 96 | Stairs, (excld. landings) except spiral staircases. |
| 97 | Extra for Centering and shuttering for :- |
| 98 | Foundations, footings, basis of columns etc. |
| 99 | Walls (any thickness) incld. attached pilasters, buttresses, plinth and string courses etc. |
| 100 | Columns, pillar, piers, posts and struts. |
| 101 | Suspended floors, roofs, landings, balconies and access platform. |
| 102 | Lintels, beams, plinth beams, cantilevers, etc. |
| 103 | Stairs, (excld. landings) except spiral staircases. |
| 104 | Clearing snow (without frost) from roads manually. |
| 105 | Snow depth upto 150 mm |
| 106 | Snow depth over 150 mm but upto 250mm |
| 107 | Snow depth over 250 mm but upto 350mm |
| 108 | Snow depth over 350 mm but upto 450mm |
| 109 | Snow depth over 450 mm but upto 550mm |
| 110 | Snow depth over 550 mm but upto 650mm |
| 111 | Snow depth over 650 mm but upto 750mm |
| 112 | Snow depth over 750 mm but upto 850mm |
| 113 | Snow depth over 850 mm but upto 950mm |
| 114 | Snow depth over 950 mm but upto 1050mm |
| 115 | Snow depth over 1050 mm but upto 1150 mm |
| 116 | Snow depth over 1150 mm but upto 1250 mm |
| 117 | Clearing snow (with frost) from roads, manually using picks and shovels; snow depth upto 150 mm |
| 118 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 119 | Random Rubble masonry with hard stone from quarry in foundation and plinth inclkuding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortor 1:6 (1 Cement : 6 Coarse Sand) |
| 120 | Dry random rubble masonry with hard stone in foundation and plinth : Using nallah stone without bond stone |
| 121 | Renewing glass pans with wooden fillets wherever necessary, Glass pans weighing 10 kgs per Sqm (4 mm ) |
| 122 | Structural steel work in single section with or without connecting plate incld. cutting, hoisting, fixing in position and applying an priming coat of approved steel primer all complete. |
| 123 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 124 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel as required in gratings, frames ,guard bar, ladder, railings, brackets , gates and similar works |
| 125 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafters and trussers and including cutting to size and shape shereverrequired. 0.50mm thick with zinc coating not less than 275 gm/m2 |
| 126 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/ m2 |
| 127 | Dismantling roofing including ridges, hips valleys and gutters, etc. and stacking the material within 50 metres lead of : G.S Sheet. |
| 128 | Engagement of mechanical excavator JCB/ poclain required during emergency including POL (complete job). |
| 129 | Construction of crate bund at head sites including cost of stones / boulders collected from different Nallah pockets . The job includes wievingcharges cost of stones but exclduing cost of wire crates but including carraige from divisional store Baramulla and head load of material with all leads & lifts complete within the jurisdiction of Sub Division |
| 130 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):Second class kail wood |
| 131 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately).Second class deodar wood 35mm thick |
| 132 | Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws. Second class deodar wood 35mm thick |
| 133 | Providing and fixing 25 mm thick shutters for cupboard etc, including ISImarked M.S. pressed butt hinges bright finished of required size with necessaryscrews:Panelled or paneled and glazed shutters: Second class teak wood |
| 134 | Providing and fixing 12 mm thick tongued and grooved Pine wood(Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celingincludining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood |
| 135 | Walls |
| 136 | ceiling |
| 137 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer andsand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 138 | Providing fixing of wire guage shutters for doors, windows etc., complete |
| 139 | Providing fixing of apperture wire jali |
| 140 | Providng fixing of ceiling fan complete with all accessories |
| 141 | Providng fixing of exhaust fan complete with all accessories |
| 142 | Providing fixing of ply board: |
| 143 | 8mm thick |
| 144 | 10mm thick |
| 145 | 12mm |
| 146 | 18mm |
| 147 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 14.79.1 Long pattern W.C Pan of size 580x440 mm |
| 148 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 meters lead. |
| 149 | For thickness of tiles 10 mm to 25 mm |
| 150 | For thickness of tiles above 25 mm and upto 40 mm. |
| 151 | Flooring with marble stone of specified thickness as per sample ofmarble approved by Engineer-in-charge, over 20 mm (average) thickbase of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed withgrey cement slurry including rubbing, polishing and curing completewith: Makrana White Second quality 18 mm |
| 152 | Kota stone slab flooring 25 mm thick over 20mm (average) thick baselaid over and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab, including rubbing, polishing and curingcomplete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 153 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillarslaid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarsesand) and jointed with grey cement slurry mixed with pigment to matchthe shade of the slabs, including rubbing, polishing and curing complete. |
| 154 | Extra for marble stone flooring in treads of steps and risers using singlelength up to 2.00 meter. |
| 155 | Wooden planking, tongued and grooved in flooring including fixing withiron screws complete: 18 mm thick |
| 156 | Second class teak wood |
| 157 | Second class deodar wood |
| 158 | HDF Laminated wooden flooring (Brand Action tessa) complete with beading, screwscomplete job: 16 mm thick |
| 159 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 160 | Providing and fixing brass bib cock of approved quality. |
| 161 | 15 mm nominal bore |
| 162 | 20 mm nominal bore |
| 163 | Basin Mixer standard make |
| 164 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 |
| 165 | Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make,weighing not less than 1.970 kg. |
| 166 | Providing and fixing Gyser 50 L capacity Havels or standard make including all necessary fittings like angle valve, connection pipes, necessary electric fitting complete job |
| 167 | Providing and fixing Kent RO (RO+UV+UF+TDS Control) 20 LPH output and 9L storage with presettling bowlincluding all necessary fittings like angle valve, connection pipes, necessary electric fitting complete job |
| 168 | Providing and Fixing of M.C..B./ MCCB of ISI marked standard make the job includes dismantling of damaged/non functional Amp. M.C..B./ MCCB and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installing and commissioning complete job |
| 169 | 03 Pole 200 Amp. |
| 170 | 03 Pole 100 Amp. |
| 171 | 04 Pole 100 Amp. |
| 172 | 04 Pole 32 Amp. |
| 173 | Providing fixing & commissioning of LED Flood Lights of reputed make and manufacture ISI Mark with stand including all accessories required at site complete job inclusive all carriages. |
| 174 | 50Watt |
| 175 | 30Watt |
| 176 | 15Watt |
| 177 | Providing Fixing of Electric bulbs (LED saver) for filtration plants etc. |
| 178 | 20W |
| 179 | 15W |
| 180 | 12W |
| 181 | 9W |
| 182 | Providing and fixing green net of approved makeincluding carriage complete job( To cover SSFP and PST\"s) |
| 183 | Supply and filling of GSB/Nallah muck at fitlration plant sites/link roads approaching to filtration plants, SR\"s and other spots for restoration and at vulnerable spots including all sorts of carriage upto site of work. |
| 184 | Providing and supplying ofof standard quality fire wood bukharies (to beused on higherreaches) as approvedby Engineerincharge |
| 185 | ProvidingandfixingofShimwire8mmincludinglockingsystemandall carriagesup tosite ofworkat differentrequired places |
| 186 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5min all kind of soil. |
| 187 | Providing fixing of electric wires Havels/Polycab or standard make PVC insulated copper conducter single core cablefor repair of electeric points,heating points, replacing of service line etc . |
| 188 | 0.75 sq mm |
| 189 | 1 sq mm |
| 190 | 1.5 sq mm |
| 191 | 4 sq mm |
| 192 | 6 sqmm |
| 193 | Providingof plastic chair set( 04 chairs and one table) for subdivisional office as approvedby Engineerincharge |
| 194 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees andsaplings of girth upto 30 cm measured at a height of 1 m above ground level andremoval of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 195 | Clearing grass and removal of the rubbish upto a distance of 50 m outside theperiphery of the area cleared. |
| 196 | Providing fixing and dismanteling of Tent, Chairs, Tables, Mic, Loudspeaker, Chairs for dice, plastic chairs for audiance etc for official functions including carriage complete . Actual cost will be monitored/verified by the concerned Assistant Executive engineer |
| 197 | Providing OF REFRESHMENT for official functions including carriage complete . Actual cost will be monitored/verified by the concerned Assistant Executive engineer |
| 198 | Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.) For fixed portion |
| 199 | Anodized aluminum (Anodized transparent or dyed to requiredshade according to IS:1868, minimum anodic coating of grade AC 15) |
| 200 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 201 | Providing and fixing 12mm thick prelaminated particle board flatpressed three layer or graded wood particle board (conforming to IS:12823 Grade-I type-II) in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on oneside and balancing lamination on other side. |
| 202 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 203 | Hire Charges for engagement of boat alongwith boatmen for carrying of material/ silt etc complete as directed by the site engineer |
| 204 | Hire charges of vehicle Scorpio/ Innova/ Sumo including Driver, POL, Documents (SOS Basis) |
| 205 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - SAND: |
| 206 | 3 km |
| 207 | 4 km |
| 208 | 5 Km |
| 209 | Beyond 5 km upto 10 km per km |
| 210 | Beyond 10 km upto 20 km per km |
| 211 | Beyond 20 km per additional km |
| 212 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate below 40mm : |
| 213 | 3 km |
| 214 | 4 km |
| 215 | 5 km |
| 216 | Beyond 5 km upto 10 km per km |
| 217 | Beyond 10 km upto 20 km per km |
| 218 | Beyond 20 km per additional km |
| 219 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 40mm and above : |
| 220 | 3 km |
| 221 | 4 km |
| 222 | 5 Km |
| 223 | Beyond 5 km upto 10 km per km |
| 224 | Beyond 10 km upto 20 km per km |
| 225 | Beyond 20 km per additional km |
| 226 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Steel/ CGI Sheets: |
| 227 | 3 km |
| 228 | 4 km |
| 229 | 5 Km |
| 230 | Beyond 5 km upto 10 km per km |
| 231 | Beyond 10 km upto 20 km per km |
| 232 | Beyond 20 km per additional km |
| 233 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement: |
| 234 | 3 km |
| 235 | 4 km |
| 236 | 5 Km |
| 237 | Beyond 5 km upto 10 km per km |
| 238 | Beyond 10 km upto 20 km per km |
| 239 | Beyond 20 km per additional km |
| 240 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Bricks: |
| 241 | 3 km |
| 242 | 4 km |
| 243 | 5 Km |
| 244 | Beyond 5 km upto 10 km per km |
| 245 | Beyond 10 km upto 20 km per km |
| 246 | Beyond 20 km per additional km |
| 247 | Carriage of materials by By Manual Labour including loading, unloading, stacking of materials |
| 248 | Steel/ C.G.I. Sheets |
| 249 | Cost of carriage including loading, unloading and stacking for 1st 50 metres (?) |
| 250 | Every additional lead of 50 metres or part there of beyond 1st 50 metre upto 09 such additional leads (?) |
| 251 | Sand, stone aggregate below 40 mm nominalsize |
| 252 | Cost of carriage including loading, unloading and stacking for 1st 50 metres (?) |
| 253 | Every additional lead of 50 metres or part there of beyond 1st 50 metre upto 09 such additional leads (?) |
| 254 | Stone aggregate 40 mm nominal size andabove |
| 255 | Cost of carriage including loading, unloading and stacking for 1st 50 metres (?) |
| 256 | Every additional lead of 50 metres or part there of beyond 1st 50 metre upto 09 such additional leads (?) |
| 257 | Cement |
| 258 | Cost of carriage including loading, unloading and stacking for 1st 50 metres (?) |
| 259 | Every additional lead of 50 metres or part there of beyond 1st 50 metre upto 09 such additional leads (?) |
