Haryana Police Housing Corporation Limited has published Tender For Providing Fire Fighting Services For Four Female Barracks At Hpa, Madhuban Distt. Karnal. Submission Date for this Tender is 05-06-2023. Fire Fighting Service Tenders in madhuban Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | [12.157.1.1]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fastenersto be paid for separately) : 1.1. For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 2 | [2.B1142] B1142. G.I. pipes 25 mm dia |
| 3 | [2.B1179] B1179. G.I. Union 25 mm nominal bore |
| 4 | [2.PH230] PH230. Core cutting up to 200mm RCC slab - 125mm dia |
| 5 | [20.119.2]Supplying, erection, testing and commissioning of horizontal motor pumping set for clear water having head 30.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked. 2. Discharge Capacity (LPM) 450 Power Capacity (BHP) 5 |
| 6 | [20.28.5]Cutting holes up to 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including, repointing, replastering, replacing bitumen and colour or white washing where required. 5. 225 mm thickness of roof or floor |
| 7 | [22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 8 | [23.22.1.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.2. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. Double pole MCCB 100 to 125 Amp, 25 Ka |
| 9 | [23.22.2.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.1. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP |
| 10 | [23.3.6.1]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.1. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) |
| 11 | [23.5.6.5]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.5. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) |
| 12 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. |
| 13 | [24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. |
| 14 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. |
| 15 | [24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but withoutcharcoal or coke and salt) etc. complete as required. |
| 16 | [24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. |
| 17 | [24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. |
| 18 | [24.10.1]CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 1. Digging & refilling of trench 30 cm wide below ground level for erection of pipe/cable (up depth of 1 Metre. underground cable excluding the cost of cable/pipe complete in all respect. |
| 19 | [24.10.4]CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 4. cement concrete 1:2:4 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey |
| 20 | [24.10.6]CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 6. Digging of pucca road in required width for laying of cable / pipe complete in all respect up to the entire satisfaction of Engineer-in charge |
| 21 | Total E.I. HSR Part |
| 22 | Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. 1)L.T Armoured cable 25 sqmm 4 core |
| 23 | `S/E of 1.5 mm sqmm x 3 core PVC insulated multi core copper conductor cable (unarmoured) 1100 volts grade (round) in existing pole/ pipe, complete in all respect including making necessary connections.` |
| 24 | S/E of 10 sqmm 3 corePVC insulated multi corecopper conductor cable (unarmoured) 1100 volts grade(round) in existing pole/ pipe, complete in all respectincluding making necessary connections. |
| 25 | `Providing and fixing fire extinguisher ISI marked complete in all respects. a)CO2Type 4.5 kg ISI marked.(IS.15683)` |
| 26 | Providing and fixing fire extinguisher ISI marked complete in all respects. b)ABC Type 4 kg Capacity (multipurpose) ISI Marked (IS 15683) |
| 27 | Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal and O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified(DSR -2022/16.7.1.4) BUTTERFLYVALVE (MANUAL) 100 mm |
| 28 | NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end and PN 16 pressure rating for chilled/ hot water circulation including insulation as specified. (DSR 2022- 16.7.3.4) NON - RETURN VALVE 100 mm dia |
| 29 | (A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) : (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with lP55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads. (DSR 2022/ 18.4.1) 900 Ipm at 35 m Head |
| 30 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (DSR 2022- 18.7.7) 100mm Dia |
| 31 | Providing, laying, testing and commissioning of `B` class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: (DSR 2022/ 18.8.7) 100 mm |
| 32 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : (DSR 2022/ 18.16.2) Stainless Steel (Grade 304) |
| 33 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 (b) 20 mm nominal internal dia gun metal globe valve and nozzle. (c) Drum and brackets for fixing the equipment`s on wall. (d) Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket.(DSR2022/18.17.1) 30 m size |
| 34 | Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: (DSR2022/18.18.1) Gun metal |
| 35 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as regd. for suitable dia MS pipe connection conforming to IS 904 as required: (DSR2022/18.19.1) 2 way-100 mm dia M.S. Pipe. |
| 36 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. (DSR-2022/18.20) |
| 37 | Providing and fixing flow switch in following sizes M.S. pipe including connection etc. as required. (DSR-2022/18.23.2) 150mm dia |
| 38 | Fabrication, supply, Insallation , testing and commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : 5.1 INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich and CTs etc.LED type RYB phase indicating lamps, ON, OFF, preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation MAKE :FIRE CUT, HYDROTECH , NEW AGE, ATASI, AGNI |
| 39 | Supply and Erection of hose box double door(750*600*250 mm) suitable for 2 No. hose pipe15 meter, 1 No. short branch pipe complete in all respect. |
| 40 | Supply and Installation of pressure gauge in existing MS pipeline including connections etc. |
| 41 | Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required. (DSR 2022/18.22) |
| 42 | SITC of Auto Glow Exit Signs and indication signs of Size 12” x 4” and Attack Fire, DP indication every exit point, Fire Point, Fire Extinguisher complete in all respect. |
| 43 | Total E.I. NS Part |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
