Tender For Construction Of New Entrance Arch At New Bus Stand In Viluppuram Municipality.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 May 2023
0 days left
EMD
16100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
villupuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Entrance Arch At New Bus Stand In Viluppuram Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-usefor plain cement concrete etc., complete complying with standard specification. |
| 2 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 3 | For Foundation Column |
| 4 | For Grade Beam |
| 5 | Supplying and filling in foundation, basement, etc with filling Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 6 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 7 | Supply and erecting centering for sides and soffits including supports and strutting up to 3.29. High for plane surface such as RCC slabs Rectangular beams Tee (or) Ell beams lintels Bed Block, slabs, landing beam canopy side lab, or bnoxing vertical slabs, rectangular(or)sqyuare(or) coloums etc., Sheets of size with all cross branching using M.S Sheets of size 90cmx60cm and B.G 10 stidfned wih welded M,.S angle of size 25mmx25mmx3mm for boarding laid over silver oak joists of size 10cmx6.5cm, spaced at about 90cm centre to and suported by csuarnia proposal centre to centre and supoported by causarnia 10cm to 13cm dia spaced 75cm centre to centreing complete complying with standard specification. |
| 8 | Column footings, column pedestals, plinth beams, grade beams, staircase steps, etc |
| 9 | Centering for plane surfaces such as RCC floor slab, roof slab, beams, lintels, etc. |
| 10 | For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. |
| 11 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCCitemsof works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and alsoincluding fixingfan clamps and fixtures in rccworkswherever necessary as directed by departmentalofficer etc., complete. |
| 12 | For Foundation and basement |
| 13 | For Superstructure in Ground Floor |
| 14 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 15 | Providing Scaffolding using 15cm dia casurina post of 4m length (3m hight to 5m projection0.5m into the groun) the distance between the two rows being 1.25m and the spaces of posts being 2.0m in both rows with two horizontal posts with 0.5m overlap of either side and biaus at 2.00m center to center including longitudinal and transooise middle brakes to setup and providing platformwith country wood plunks of 40mm thick and 1.00mn width etc., comlplete, Rate for an initial height of 3m and length of 1m) complete |
| 16 | Providing Elevation (works for entrance and exit arch works as directed for departmental officers including drawing prparation materials construction labours, painting, works etc., The works includes column and top beam and specials materials used for constructing recommended design etc., complete |
| 17 | GST. 18%(CGST-9%,SGST-9%) |
AI Tender Summary
Tender Timeline
May 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender