|
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, leveling, ramming the foundationtrenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.B.C.D -5.1.1+5.1.2 |
| 2 | Earth filling infoundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earthobtainedfrom excavation offoundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.(mode of measurement compacted volume)B.C.D5.1.7 |
| 3 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)B.C.D5.1.8 |
| 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including\" cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume)B.C.D5.1.10. |
| 5 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.B.C.D5.6.3 |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6(1Cement:3coarsesand(zone-III):6gradedstoneaggregate40mm nominal size) B.C.D 5.3.1.5 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8(1Cement:4coarsesand(zone-III): 8gradedstoneaggregate40mm nominal size) )B.C.D 5.3.1..6 |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)B.C.D 5.3.1.3 |
| 9 | Providing R.C.C.M - 1500 with nominal mix of (1:2:4) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.B.C.D 5.3.9.2 |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) B.C.D5.3.10 |
| 11 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).Wall Beam B.C.D5.3.11 |
| 12 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). lintelB.C.D5.3.11 |
| 13 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).Roof slabB.C.D5.3.11 |
| 14 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). Counter Slab B.C.D5.3.11 |
| 15 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). ChajjaB.C.D5.3.11 |
| 16 | Providing Tor steel reinforcement of 8mm,10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. B.C.D5.5.5(a) 8mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 17 | (b) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 18 | (c) 12MM&16mm (TMT coil Fe 500) (only valid forTata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 19 | Centering and shuttering including strutting, proping etc and removal of formwork forfoundation ,footing ,bases of column etc for mass concreteing B.C.D5.3.17.1 |
| 20 | Centering and shuttering including strutting , proping etc and removal of formwork for Columns, piers, pillars, Abutments,posts and strutsB.C.D5.3.17.6 |
| 21 | Centering and shuttering including strutting , proping etc and removal of formwork for lintels, beams, plinth beams,girder and cantilevers B.C.D5.3.17.5 |
| 22 | Centering and shuttering including strutting , proping etc and removal of formwork for suspended flors and roofs, balconies and access platform B.C.D5.3.17.3 |
| 23 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding,top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.DSR 10.18 |
| 24 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.B.C.D 5.2.6 |
| 25 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.B.C.D 5.2.23 |
| 26 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).B. C.D5.3.5 |
| 27 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\"x4.5\"x3\") in C.M. (1:6) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.B. C.D5.2.52 |
| 28 | Providing designation 112mm thick reinforcement designtion 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\"x4.5\"x3\") in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty ( but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I.B. C. D 5.2.54 |
| 29 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.B.C.D5.7.6 |
| 30 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.B.C.D 5.7.3 |
| 31 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. B.C.D 5.7.1 |
| 32 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.B.C.D 5.7.11 |
| 33 | Supplying and fixing C.I. cover without frame for manhole:- 500 mm diameter C.I. cover (Medium duty) the weight of the cover to be not less than 58 kg.DSR 1918.2 |
| 34 | Making Soak Pit1.2x1.2x 1.2 meter deep with 45x45cm dry briick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.2m long complete as per standerd design.DSR 19.33 |
| 35 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.B.C.D 5.8.24 |
| 36 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I.B.C.D5.6.7 |
| 37 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.DSR 11.41A.3.1 |
| 38 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.DSR 8.31 |
| 39 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.B.C.D 5.4.1 |
| 40 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windowswith black board core blended with high qualityphenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.B.C.D 5.4.38 |
| 41 | Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windowswith black board core blended with high qualityphenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.B.C.D 5.4.39 |
| 42 | Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5mm thick DSR 9.127.1 |
| 43 | Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.DSR 9.125 |
| 44 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.DSR 9.48.2 |
| 45 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.B.C.D 5.5.14 |
| 46 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D5.8.45 |
| 47 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeDSR21.1.1.2 |
| 48 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)DSR21.1.2.2 |
| 49 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):DSR21.3.1 |
| 50 | Waterproofing for Old and New RoofSlab :-Providingandlaying waterproofing treatment onroof slabby applyingtwo Component,factory designed, ready to use, acrylic modifiedflexibleB.C.D5.12.1 |
| 51 | Covering of treated surface with PCC :- Providing 25 mm thick Cement Concrete M20(1:1.5:3)maintaining slope inalternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mmB.C.D5.12.2 |
| 52 | Providing and filling of 6 mm thickGroove between 25 mm PCC Panels with Polysulphide Sealant(Poring Grade)as per drawings and technical specifications and direction of E in Charge.(with18%B.C.D 5.12.8 |
| 53 | Providing & fixing on wall face unplasticised -Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socket ed pipes. 110 mm dia12.41.2 |
| 54 | Providing & fixing on wall face unplasticised -Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socket ed pipes.Bend 110 mm dia DSR 12.45.5.2 |
| 55 | Shoe Plain 110mmDSR 12.45.6.2 |
| 56 | Providing & fixing on wall face unplasticised -Rigid P.V.C. rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 57 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.B.C.D 5.10.33 |
| 58 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated andgroutedwithfinesand,includingnecessaryexcavation,levelling& dressing & finishing the top smooth.B.C.D 5.10.33 |
| 59 | Electrical :-Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FRPVC insulated copper conductor single corecable in surface/recessed PVC conduit, with modular switch ,modular plate, suitable GI box and earthing the point with 1.5sq mm FR PVC insulated copper conductor single core cable etc as required. Group A (E.S.R 1.3.1) |
| 60 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps moduler socket outlet and 5/6 amps moduler switch , connection painting etc.as reqd.(E.S.R 1.31) |
| 61 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps moduler socket outlet and 15/16 amps moduler switch , connection painting etc.as reqd.(E.S.R 1.32) |
| 62 | Wiring for light/ power plug with 2x4 sq mm Power plug wiring in pvc conduit 2x4 sq mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit along with 1No.4sqmm FRPVC insulated copper conductor single core cable for loop earthing as required .(E.S.R 1.5) |
| 63 | Wiring for circuit / sub main wiring alongwith earth wire with the following sizes ofPVC insulated, copper conductor , single core cable in surface/ recessed PVC coduit as required.2X1.5 sq mm +1 x 1.5sq mm earth wire.(E.S.R 1.7).1 |
| 64 | 2X2.5 sq mm +1 x 2.5sq mm earth wire.(E.S.R 1.7.2) |
| 65 | 2X10.0 sq mm +1 x 10.0sq mm earth wire.(E.S.R 1.7.3) |
| 66 | 4X6.0 sq mm +2 x 6.0sq mm earth wire.(E.S.R 1.7.4) |
| 67 | Wiring in exiting conduit supply and drawing following size of FRPVC insulated copper conductor ,single core cable in the exitingsurface/ recessed PVC coduit as required.2x 4sq mm(E.S.R 1.15.20) |
| 68 | S/F DP MCB Isolator :-supplying and fixing following rating , four pole, 415V, isolator in the existing MCB DBcomplete with connections, testing and commissioning , etc. as required. 40 amps(E.S.R 2.15.1) |
| 69 | 80/100amps(E.S.R 2.15.1) |
| 70 | S/F SP MCBDB Isolator :-Supplying and fixing following rating , single pole netural sheet MCB distribution board , 240 V, isolator in the existing MCB SBcomplete with connections, testing and commissioning , etc. as required. 8 way,double door(E.S.R 2.8.8) |
| 71 | S/F TP MCBDB Isolator :- Supplying and fixing following rating ,three pole netural sheet MCB distribution board ,415 V, isolator in the existing MCB SBcomplete with connections, testing and commissioning , etc. as required. 4 way(4 + 12),double door,Horizontal type(E.S.R 2.9.4) |
| 72 | 6 way (4 + 18),double door,Horizontal type(E.S.R 2.9.4) |
| 73 | Supplying and fixing 6 amps to 32 amps rating , 240 volts, \"C\" series , miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning , etc. as required.6/32, single pole \"C\" series (E.S.R 2.12.1) |
| 74 | 40 amp ,TNP(E.S.R 2.12.9) |
| 75 | 40 amp ,DP(E.S.R 2.12.6) |
| 76 | 50/63 amp, DP(E.S.R 2.12.7 |
| 77 | Supplying and fixing ceiling rose ,2 pin 5 amp ceiling rose on the exitingjunction box /wooden block includingconnection painting etc.as reqd.(E.S.R 1.33) |
| 78 | Installation, testing and commissioning of pre-wired, fluorescent fitting./ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly / wall including connection with 1.5 sq mm FR PVC insulated. copper conductor single core cable and earthing etc. as required(E.S.R 1.41) |
| 79 | Installation, testing and commissioning of pre-wired, fluorescent fitting./ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly / wall including connection with 1.5 sq mm FR PVC insulated. copper conductor single core cable and earthing etc. as required2 no down rod of 20mm dia(E.S.R 1.42) |
| 80 | ITC ceiling fan - Installation, testing and commissioningof ceiling fan ,including wiring the down rods of standard length (up to 30 cm )with 1.5 sq.mm,copper conductor single core cable and earthing etc. as required(E.S.R 1.44) |
| 81 | Supplying and fixing following piano type switch/ socket on the existingmodular plate and switch box including connection but excluding modular plate . As required. 5/6 amps,one way switch(E.S.R 1.23.1) |
| 82 | 5/6 amps,3 pin socket outlet(E.S.R 1.23.4) |
| 83 | Electronic step fan regulator ,mini(E.S.R 1.23.9) |
| 84 | S/F PVC/G.Ibox of following size on surface or it recess with suitable size of phenolic laminated sheet cover infront including painting etc as required 75mmx75mmx50 mm deep (4\"x4\")(E.S.R 1.22.1) |
| 85 | Installation of Exhaust fan 450 mmsweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.(E.S.R 1.48) |
| 86 | S/F PVC conduitof following size PVC conduit along withaccessories in surface / recess including cutting the wall and making good the same in case recessed conduit as required. 20 mm(E.S.R 1.21.1) |
| 87 | S/F Batten holder -supplying and fixing betten /single holder including connection etc required (E.S.R 1.34) |
| 88 | Earthing with copper earth plate 600*600*3 mm thick including accessories and providing masonary inclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as reqd.(E.S.R 3.6) |
| 89 | Suppying & laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electode including soldering etc .as reqd.(E.S.R 3.7) |
| 90 | Providing and fixing of lighting conductor final made of 25 mm dia 300 mm long with 85 mm dia 3 mm thick copper base plate including holes etc.(E.S.R 4.2) |
| 91 | Providing and fixing of lighting conductortap in horizontal run providing and fixingG.I tape 20mm x 3mm thick on parapet or surfaceof wall for light conductor complete as required.(for horizontal)(E.S.R 4.7) |
| 92 | Providing and fixing of lighting conductortap in vertical run providing and fixingG.I tape 20mm x 3mm thick on parapet or surfaceof wall for light conductor complete as required.(for vertical)(E.S.R 4.8) |
| 93 | MV Cable :-supply of ISI marked aluminium cableconductor XLPE PVC Insulated cable as per I.S 7098 armouredserved shaelthed 1100 v grade with termination and laying of cable.(E.S.R M-328) |
| 94 | MV Cable laying upto 120 sq mm in ground with out sand and cover -laying of one nuber PVC insulated and PVC served shaelthed /XLPE power cable of 1.1 kv grade of size not exceeding 185 sq.mm .but not exceeding 400 sq.mm direct in ground including excavation and refilling the trench etc as required .(E.S.R 5.12) |
| 95 | supplying Installation, testing and commissioning of following size ceilling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sq mm. FR PVC insulated, copper wire suitable for 230V 50 Hz, single phase supply etc. complete as required. (E.S.R 9.4.2) |
| 96 | Supplyingof Exhaust fan : supply and fitting230 mm ,230 v A C metal exhaust fan in the existing opening including making good thedamage, connection, testing, commissioning etc. as required(E.S.R M-774) |
| 97 | Led tube with batten 20 W/ 22W :- supply and fixing of wall mounted LED 20 W/22W tube + batten electronic driver and acessories as requried(E.S.R 9.5.2) |
| 98 | Led bulb 9 W/ 10W :- supply and fixing of wall mounted LED 9 W/10Wbulb acessories as requried (E.S.R M-855) |
| 99 | Supplying, fitting and fixing viterous earthen ware I.W.C. of parry hindustan or any other ---------do------do--------all complete as per specification and direction of E/I. 580 mm long - with 10 ltr. Low level P.V.C cistern DWSD 3.2.1A© |
| 100 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.DWSD 3.2.2 |
| 101 | Providing and fixing C.P. brass bib cock of approved conforming to IS 893115 mm nominal bore (DSR 18.49.1) |
| 102 | Providing and fixing C.P.brass long bodybib cock of approved quality conforming to standard and weight not less thain 690gms.15mmnominal bore(DSR 18.51.1) |
| 103 | Providing and fixing PTMT / C.P Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms(DSR 18.65) |
| 104 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. (DSR 18.53.1) |
| 105 | Providing and fixing P.T.M.T. / C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms(DSR 18.75.1) |
| 106 | Providing and fixing Mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Circular shape -453 X357 mm(DSR 17.32.1) |
| 107 | Providing and fixing Wash basin with C.I/M.S brackets, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require. Falt back wash basin size550x400mm with single 15mm PTMT pillar cock(DSR 17.7.2) |
| 108 | Providing & fixing ptmt/ C.P. grating of approved quality.Circular type125 mm nominal dia. With 25 mm waste hole.(DSR 18.58.1.2) |
| 109 | Providing and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality. 15 mm nominal bore with 45 cm length.(DSR 18.74.2) |
| 110 | Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28.2.1) Flexible Pipe |
| 111 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL) Concealed work including cutting chases and making good the wall etc..15 mm dia(DSR 18.8.1) |
| 112 | 20 mm dia(DSR 18.8.2) |
| 113 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsThis includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL) External Wall25 mm dia(DSR 18.9.3) |
| 114 | 32 mm dia(DSR 18.9.4) |
| 115 | 40 mm dia(DSR 18.49.5) |
| 116 | Suplying matarials with lobour for construction inspection chamber of designation class 75b brick deep 600x450 internal diamention having 250mm wall thickness in cementmorter(1:6)including 12mm cement plaster (1:4)with punning on inside and cement plaster (1:6)with 600x450mm G.I. cover with frame (weight not less than 36k.g)in foundation and refilling all complete as per specification and direction of E/I.(DWSD 3.3.8) |
| 117 | Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings.(DSR 18.52.1) |
| 118 | Providing and placing on terrace ( at all floor levels ) polyethylene water storage tank ISI : 12701marked indicating the BISLicense No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (SINTEX, ELECTROPLAST, STAR, LOTUS OR EQUIVALENT having valid I.S.I. licence).(M-079) |
| 119 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.C.P brass Towel rail 20mm x 600mm with bracket containert (DWSD-3.1.21) |
| 120 | Providing and fixing c.p. towel ring complete with brackets fixed to wooden cleat with c.p brass screws(DSR 17.72) |
| 121 | Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever requiredkitchen sink without drain board 510x1040mm bowel depth 178mm(DSR 17.10.1.4) |
| 122 | Providing and fixing PTMT/ C.P. swivelling shower,15mm nominal size, 95mm long, 65mm dia. of approved quality, color & make weighing not less than 40 gms with approximate 80 holes of 1.2 mm dia. (DSR 18.64) |
| 123 | Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised -Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion (DSR 12.41.1) 110 mm dia |
| 124 | Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised -Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.(DSR 12.41.2)75mm dia |
| 125 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.75 mm Coupler (DSR 12.42.1) |
| 126 | 110 mm Coupler (DSR 12.42.1.2) |
| 127 | 75 mm single push fit coupler (DSR 12.42.2.1) |
| 128 | 110mm single push fit coupler (DSR 12.42.2.2) |
| 129 | 75mm Single tee with door(DSR 12.42.3.1) |
| 130 | 110mm Single tee witht door(DSR 12.42.3.2) |
| 131 | 75mm Single tee without door(DSR 12.42.4.1) |
| 132 | 110mm Single tee without door(DSR 12.42.4.2) |
| 133 | 75mm Bend 87.5°(DSR 12.42.5.1) |
| 134 | 110mm Bend 87.5°(DSR 12.42.5.2) |
| 135 | 75 mm Shoes (plain)(DSR 12.42.6.1) |
| 136 | 110 mm Shoes (plain)(DSR 12.42.6.2) |
| 137 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.(a) From 0.00 M to 50.00 M below G.L.(DWSD-M1035) |
| 138 | (b) From 51.0 M to100.00 M (DWSD-M1045) |
| 139 | Supplying, assembling, lowering and fixing in vertical position in borewell,unplasticizedPVCmediumwellcasing(CM)pipeof required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia(DWSD-M1048) |
| 140 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \"V\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge(DWSD-M1042) |
| 141 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia(DSR-23.13.3) |
| 142 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp(DSR-23.14.3) |
| 143 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages2 HP(DWSD-M1055) |
| 144 | Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes , all complete job as per direction of E/I. Starter 10.0 HP(DWSD-M1065) |
| 145 | Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etcall complete job as per direction of E/I.(E.S.R-1.15.21) |
| 146 | Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I.(DWSD-M930+1051) |
| 147 | Carriage of Material, Cement |
| 148 | Brick |
| 149 | Sand |
| 150 | Stone Chips |
| 151 | Steel |
| 152 | G.S.T @ 18% |
| 153 | Labour Cess 1% |
