Brahmapur Development Authority has published Tender For Construction Of Childrens Play Ground Over Beda Open Space Lay-Out No 2118/05.08.2010 At Bharat Vihar Mouza Khodasing Brahmapur. Submission Date for this Tender is 05-06-2023. Playground Construction Tenders in brahmapur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Removing old lime or cement plaster from walls including racking out joints 12mm. deep and removing the debries within 50mtr lead |
| 2 | Earthwork in excavation of foundation trenches in all kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. |
| 3 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 4 | Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portlandslag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work as per the instruction of the Engineer-in-Charge. |
| 5 | RCC work of (1:1½:3) with 12 mmblack hard granite (Crusher broken) stone chips including hoisting and laying, royalties and taxes all materials and cost all labours, sundries, T & P required for the work as per the instruction of the Engineer-in-Charge. |
| 6 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Bindingwire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge. |
| 7 | First class Fly Ash Brick masonry using F.A. bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in foundationincluding splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.1st floor |
| 8 | Solid C.C Block masonryworkhaving crushing strength not less than 75 kg/sqcm of size 300 mm x 200 mm x 150 mm in cement mortar(1:6) in fdn. and plinth |
| 9 | 12mm. thick cement plaster in cement mortar (1:6) for brick work. |
| 10 | Transportation of selected earth from borrowing area and rolling with PRR for levelling the grounded. Complete with minimum 5Km lead and as per direction of EIC |
| 11 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: Stone-finished High Strength Pavers 80mm |
| 12 | Providing & Applying priming one coat with water based Cementprimer of approved brand and manufacture onplastered surface including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge. |
| 13 | Wall painting two coats with 1st quality exterior grade weather coat paintof approved make to make an even finished surfacein all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. |
| 14 | Scraping old paint with scrapers,sand paperingand washing with soap water or soda including scaffolding charges etc. complete. |
| 15 | Supplying, Fitting and Fixing of FRP Bench with cost of material , labour T&P, taxes and necessary foundation if requires |
| 16 | Provision for site Clean, Pre & Post Photograph of work site ,Display Board with Details of Name of the Work , Estimated Cost , Head of Account. and inaugural stone/ Foundation stone other unforeseen item expenditure etc. Complete |
| 17 | Providing & Applying priming one coat with ready mixed pink or gray primer of approved brand and manufacture on iron work as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
| 18 | Providing & Painting with two coat synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer - In-Charge at all floors and all heights including all material & labour complete. |
| 19 | Supplying, Fitting and Fixing of double swing with cost of material , labour T&P, taxes and necessary foundation if requires. |
| 20 | S/F fixing of Four Seater Merry-go-Round.The main frame of the duck merry go round is made up of 20 NB & 32 NB GI pipes. The GI pipes are pu coated. The stand is made in 80 NB GI pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The seats are made out of FRP. It accommodates four children at a time.The Equipment shall be painted with PU paints. |
| 21 | S/F fixing of plane slide |
| 22 | Supply & planting Trees - saplings, well developed, (min 3.0m high on full growth), well branched crown, well developed, in 12" pot or polybag, disease free and Development of Trees including digging of pits, pre-treating pits with anti-termite insecticide, spreading excavated earth around pits, filling good quality soil and FYM mix, and planting each plant including supply of necessary labour and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including the cost of the plant (Pit size 1500 x 1500 x 1500mm) including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete. |
| 23 | Supplying , Fitting and Fixing of M .S Grillgate for the entrance ,frame with 1mm thickwith all cost of material labour T&P etc. complete as per the direction EIC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
