Tender For Supply And Installation Of Active And Passive Network Components - 124001044 6 PORT MULTIMODE LIU Rack Mountable Fibre Optic Patch Panels (Pre-Loaded) with rubber grommets for Fibre Cabling must manage splices and terminations. Type of compatible optic fibre connectors: SC,ST,FC,LC Type of Compatible optic fibre cables: Multimode – Simplex, Multimode – Duplex No. of ports: 6 Nos Size of Fiber Optic Patch panel: 19 inch 1 U Rack Material of Panel: Steel Color of the panel: Black (Powder coated) Accessories: Mounting kit / Bracket, Cable ties, Mounting Ear Screw, Cable entry Gland, Fiber Management clip, Cable Grounding kits, Port Caps Cable saddles: Front mounted Top and Front cover: Removable Installation: The bidder should supply and install the network component at the appropriate location based on the industry’s standards and the site conditions. 2 Nos 124001045 6 CORE MULTIMODE FIBRE CABLE – 100 Metre length Multi-mode OM4 HDPE Fibre Cable For Networking Fibre count: 6 Jacket material: HDPE Fibre type: Multi-mode OM4 Type of tube / no. of tube / no. of core per tube: Unitube /1/6 Cable Armouring: Armoured with ECCS tape Each meter is to be printed with a sequential length counter of cable apart from marking requirement as per relevant specifications and certifications. Installation: The bidder should supply and install the network component at the appropriate location based on the industry’s standards and the site conditions. 1 No 124001046 LC-SC MULTIMODE FIBRE PATCH CORDS Connector type, Connector End A: LC Connector type, Connector End B: SC Cable type: Duplex Fiber type: Multimode 50/125 micron Cord Length (in m): 3 mtrs Installation: The bidder should supply and install the network component at the appropriate location based on the industry’s standards and the site conditions. 10 Nos 124001047 CAT6 24 PORT FULLY LOADED PATCH PANEL CAT 6 patch Panel conforming to ANSI/TIA/EIA-568 C.2 latest or ISO/IEC:11801 latest suitable for CAT 6 U/UTP Height of patch panel: 1U No. of ports (RJ 45): 24 Ports Loaded with modular plug fitting (RJ 45) Cable Management (Rear side) Installation: The bidder should supply and install the network component at the appropriate location based on the industry’s standards and the site conditions. 2 Nos 124001048 28 PORT GIGABIT WEB-MANAGED SWITCH Interfaces: 24 x 10/100/1000BASE-T ports, 4 x Combo 10/100/1000BASE-T/SFP ports. Fully loaded with SFP Modules. Advanced L2 switching and security features including Web-based GUI, DoS Attack Prevention, IGMP snooping, port mirroring, Spanning Tree Protocol (STP), Link Aggregation Control Protocol (LACP), static routing, Port-based VLAN, Loopback Detection (LBD), RADIUS Authentication, MAC Access List, SNMP, Weighted Round Robin (WRR), Strict Priority Queue (SPQ),Broadcast/Multicast/Unicast Storm Control, Port-based Bandwidth Control, etc CPU Speed: Minimum 500MHz Memory: Minimum 128MB Flash Memory: Minimum 32MB MAC Address Table size: Minimum 8K Jumbo Frame: Minimum 9K bytes AC Input Power 100 to 240 VAC, 50/60 Hz Rack Form Factor: 1U Warranty: 3 Years Comprehensive onsite Installation: The bidder should supply and install the network component at the appropriate location based on the industry’s standards and the site conditions. 6 Nos 124001049 INDOOR ACCESS POINTS WITH PoE INJECTORS Device Interfaces: IEEE 802.11a/b/g/n/ac wireless interface and 1 x Gigabit PoE-capable LAN port Web-based GUI Security: WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WEP 64/128-bit encryption, SSID broadcast disable, MAC address access control, Network Access Protection (NAP), Internal RADIUS server Mounting base to install the access point on Wall/Ceiling Power Supply: External power adapter, IEEE 802.3at PoE LEDs: Power/status Operating Frequency: 2.4 GHz band & 5 GHz band Warranty: 3 Years Comprehensive onsite Installation: The bidder should supply and install the network component at the appropriate location based on the industry’s standards and the site conditions. 8 Nos 124001050 CAT6 ETHERNET CABLE - 305 METRE Category: CAT6 U/UTP Cable for Indoor use Cable colour: Grey Conductor count (in Nos.,): 8 Length of cable in a bundle (Mtrs): 305 mtrs. Cable should have internal cross separator and each meter is to be printed with sequential length counter. Conductor Material: Bare Copper 2 Bundles 225002221 9U WALL MOUNT RACK Rack Features: DIN Standard Slots. Adjustable 19” equipment mounting verticals to provide better mounting flexibility and to maximise the usable mounting space. Depth adjustable mounting slots. Provision to mount cooling fans on the top panel. Front Door : Lockable Toughened Glass Door with Lock & Key, Basic Frame : Steel Finish : Powder Coated Top and Bottom Cover : Welded to Frame, Vented and Field Cable entry exit cut outs Color : Grey Static Load : ~ 50 kgs 19 Mounting Rails with U-Marking: 2 pairs 1 Nos 1U Cable Manager: 2 pcs Hardware Packet: 2 Pkts 6 Socket 5/15Amp. Power Distribution Unit: 1 No Installation: The bidder should supply and install the network component at the appropriate location based on the industry’s standards and the site conditions. 313001031 INSTALLATION OF NETWORK COMPONENTS 6 CORE MULTIMODE FIBRE CABLE - 100 Metre length: To be laid between two buildings (overhead). 9U WALL MOUNT RACK: To be installed at E&IG building. 6 PORT MULTIMODE LIU: To be installed at two buildings (E&IG, CACM) LC-SC MULTIMODE FIBRE PATCH CORDS: To be installed at two buildings (E&IG, CACM) CAT6 24 PORT FULLY LOADED PATCH PANEL: To be installed at E&IG building (1No) 28 PORT GIGABIT WEB-MANAGED SWITCH: To be installed at E&IG building (2 Nos) INDOOR ACCESS POINTS WITH PoE INJECTORS: To be installed at E&IG building (1 No) The bidder should supply and install the network component at the appropriate locations based on the industry’s standards and the site conditions.
