Irrigation And Public Health Department has published Providing Water Supply Scheme To Palgi, Dhallan, Muhan, Garsa, Railla-Rote, Bhallan, Dhara, Talara, Ronal-Donal, Kashadhi, Dari, Phallana, Kothi Chehani, Khadagad, Seri, Balagad, Tandi, Chethar, Pekhari, Sarchi, Laida, Tilroo, Thatibir, Ratwah Etc In Tehs. Submission Date for this Tender is 26-05-2023. Water Supply Project Tenders in Kullu Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavationin foundations, trenches etc., in earth work , lift up to 1.50 metres stacking the excavated soil not more then 3 metres clear from the edge of excavation and then returning the stacked soil in 15 cm layers, when required in to plinths , sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 metres in pick jumper work complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 2 | Providing and laying cement concrete 1:3:6 ( 1cement: 3 Sand : 6 graded stone aggregate, 40mm nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 3 | Providing and laying cement concrete 1:4:8 ( 1cement: 4 Sand : 8 graded stone aggregate, 40mm nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 4 | Providing and laying cement concrete 1:6:12 (1 cement: 6 sand: 12 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts and to the enitre satisfaction of Engineer-in- charge. |
| 5 | Providing form work with steel plates3.15mm thick welded with Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fairfinish I/c centring , shuttering , strutting and proping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4m and removal of the same for insitu- reinforced concrete &plain concrete work in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 6 | Foundation, footings basis of columns etc. and mass concrete complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 7 | Flat surfaces such as soffits of suspended floors , roofs, landings & the like . Floors etc. up to 200 mm in thickness complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 8 | Vertical surface such as walls(any thickness) partitions and the like includingattached pillasters, butteresses, plinth and string courses and the like complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 9 | Sides and Soffits of beams, beam haunchings, contiliver girders, bressumers and lintels not exceeding 1 Metre in depth in all heights from floor complete in all respect with in all leads and lifts. |
| 10 | in column pillars , post struts in CSrcularor curved in plain complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 11 | Edge of slab complete in all respect with in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 12 | Providing from work of ordinary timber plankings so as to give a rough finish including centring,shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceililng not exceeding 4 metres and removal of the same for in situ reinforced concrete and plain concrete work in:- |
| 13 | Arches exceeding 6 metres span. in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 14 | Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in: |
| 15 | Foundations, footings, bases of columns and the like and mass concrete in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 16 | in wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 17 | iii)Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 18 | Columns pillars , Posts etc upto floor teo level complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 19 | Beam cantiliver girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 20 | Arches upto floor two level in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 21 | Providing and laying cement concrete 1:2:4(1cement:2sand:4graded stone agg. 20mm nominal size) excluding cost of form work and reinforcement for reinforced concrete work in suspened floors,roofs,landing and shelves and their supports ,balconies, beams,girders,bressumers and cantilever upto floor two level . |
| 22 | Foundations, footings, bases of columns and the like and mass concrete in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 23 | Columns pillars , Posts ,struts , square , rectangular on plygonal in plan complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 24 | Providing in RCC work smooth finishing of the exposed surface with cement mortoe 1:3 ( 1 cement :3 sand)in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 25 | Providing mild steel/tor steel reinforcement including bending, binding and plaCSng in position complete up to floor two level in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 26 | Steel work welded in bulit up sections, trusses and framed work i/c cutting, hoisting, fixing in position and applying priming coat of red lead paint in :- Gratting, framed guard, bars, ladders and similar work in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 27 | Brick work using common burnt clay building bricks in super structure above G.L to 1st floor 2nd class bricks cement mortar 1:4(1cement:4sand) with in complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 28 | Brick work using common burnt clay building bricks in foundation and plinth 1st class bricks cement mortar 1:6 (1cement:6 sand) with in complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 29 | Providing and fixingangle iron door, window,clerestory window frame manufactured from steel iron sectionof 40x40x6mm, thickness including hinges jamb, lock jamb,beed and if rerquired anglethreshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means, lugswith split end tails to each jamb including butt hinges 2.50mmthick with provision for locking arrangement and shock as speCSfied and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-charge. |
| 30 | Providing wood work in frames of doors, wndows, clerestory windows and other frames wrouhgt, frramed and fixed in position in 2ndclass Deodarwood within all leads and lifts as per direction & satisfaction of Engineer-in-charge. |
| 31 | Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished black enammeled iron hinges with necessary screws: 2nd class deodar wood 40mm thick including entire carriage of material as per satisfaction of Engineer-in-charge. |
| 32 | Half brick work using common burnt clay buildings bricks in superstructure above 1st floor level in cement mortar 1:4(1cement:4sand) 2nd class bricks with in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 33 | Pointing on brick work with cement mortar 1:4 (1 cement:4 sand) raised & cut within complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 34 | 6mm thick cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) within complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 35 | 15 mm thick cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) with in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 36 | 20 mm cement plaster in single coat on rough side of brick/stone//concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) with in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 37 | Providing and fixing M.S. grills of require pattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws within complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 38 | Providing and fixing wire gauge shutters using galvanised M.S.wire gauge of I.S gauge designation 8 S.G. with wire of dia 0.56mm for doors windows and clerestory windowsincluding bright finished black enamelled iron hinges with necessary screws 30mm thick 2nd class deodar wood with in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 39 | Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of speCSfied sizes laid in floors treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles(wherever required) incliding rubbing and polishing complete with tileswith in all leads and lifts.. |
| 40 | Boulder filling behind retaining wall under floor with in complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 41 | Cement concrete flooring 1:2:4(1 cement: 2 sand: 4graded stone agg. 20mm nominal size) laid in one layer finished with a floating of neat cement 40mm thick in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 42 | Providing 40x3mm flat iron hold fast 40cm long i.e fixing to from with 10mm dia bolts, nuts and wooden plug and embedding in cement concrete block 30x10x15cm 1:3:6 ( 1cement 3 sand 6 graded stone agg. 40mm nominal size)in complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 43 | White washing with lime on undecorated wall surfaces(two coats) to give an even shade including thoroughly brooming the surface to remove all dust dirt & other foreign matter with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. |
| 44 | Distempering with Oil bound distemper of approved brand and manufacturer (two coats) and of required shade on un-decorated wall surface to give an even shade over and including priming coat of whiting after througly brushing the surface free from mortar and other foreign matters with in all leads and lifts complete in all respect. in all leads and lifts. |
| 45 | Distempering with dry distemper of approved brand and manufacturer (two coats) and of required shade on un-decorated wall surface to give an even shade over and including priming coat of whiting after througly brushing the surface free from mortar and other foreign matters with in all leads and lifts complete in all respect. in all leads and lifts. |
| 46 | Finshing wall with with water proffing cement paintof approved brand and manufacture (two coats) brushing to give an even shade i/c cleaning of oil, dirt, dust and other foreign matters, sand papering and knotting etc. in all leads and lifts complete in all respect |
| 47 | Providing and fixing anodized M.S sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts and screw in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 48 | 300x16mm |
| 49 | 250x16 |
| 50 | Providing and fixing MS tower bolts(barrel type)anodized transparent or dyed to required shade and colour with screws etc. in complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 51 | 200x10mm. |
| 52 | 150x10 mm |
| 53 | Providing and fixing M.S handles anodized transparent or dyed to required colour or shade with necessary screws etc. in complete in all respects with in all leads and lifts as per direction of Engineer in charge. 125mm |
| 54 | Applying priming coat on new wood and wood based surfaces with ready mixed paint and brushing to give an even shade including cleaning of all dirt,dust and other foreign matter within complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts. |
| 55 | Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paintto give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with readymade paint other than white with in all leads and lifts.. |
| 56 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement: 3sand: 6 graded stone aggregate 20mm nominal size). with in all leads and lifts |
| 57 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes ( MG) including fitting and clamps including making good the wall ceiling and floor complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .. |
| 58 | a) 15mm nominal size |
| 59 | Providing and placing(at all heights) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including all fittings andfloat valve excluding the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license ]. 1000 Ltrs. capacity |
| 60 | Providing and fixing vitreous china wash, down water closet (European type. W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement: 1 sand). Seat and cover to be measured and paid for seperately. Anglo Indian Universal closet.in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 61 | Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers: White plastic seat and cover, solid type in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 62 | Providing and fixing P.V.C. low level flushing Cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 63 | Providing and fixing PVC / G.I. inlet connection for flush pipe connecting with W.C. pan in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 64 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 65 | Providing and fixing C.P. brass angle valve of standard design and of approved make, 15mm nominal bore in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 66 | Providing and fixing C.P. water jet including connection pipe with check nut in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 67 | Providing and fixing PVCpipes of 10 Kg f/Sq.cm working pressure including fittings as per requirement at site complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .110 mm OD |
| 68 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as requiredGroup-C in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 69 | Wiring for CSrcuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 70 | 2x1.5 Sq. mm. |
| 71 | 2x4.0 Sq. mm. |
| 72 | Supply and fixing Socket outle on the exists switch box/covers including connections etc. as required in complete in all respects with in all leads and lifts as per direction of Engineer in charge. 5 pin 5/6 amps, percelain boxe/piano type |
| 73 | Supply and fixing/piano type switch on the existing switch box on the switch box/cover including connection etc. as required in complete in all respects with in all leads and lifts as per direction of Engineer in charge.SP 5/6amps , one way switch. |
| 74 | Supplying and fixingSocket outlet on the exists switch box/covers including connection etc. as required in complete in all respects with in all leads and lifts as per direction of Engineer in charge. 6 pin 15/16 amps, socket outlet ,percelain boxe/piano type |
| 75 | Supply and fixing piano type switch on the existing switch box on the switch box/cover including connection etc. as required in complete in all respects with in all leads and lifts as per direction of Engineer in charge. SP 15/16 amps, one way switch. |
| 76 | Supplying and fixing woodern box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 77 | a) 229mm x102mmx60mm deep |
| 78 | b) 203mmx152mmx60mm deep |
| 79 | Supplying and fixing ceiling rose on existing junction box/wooden block including connections etc. as required in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 80 | Supplying and fixing plain pandent with 16/0.20mm twin twisted, flexible PVC insulated copper cable and backlite pendant holder including connection etc as required in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 81 | Supplying and fixing 6 Amps to 32 Amps rating,10 KA breaking capacity 240 volts, C-Curves miniature Circuit breaker of following poles in the existing MCB Db complete with connection testing and commissioning etc. as required Cat-A (single pole) in complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 82 | Supplying and fixing of following way, single pole and netural, sheet steel, MCB distribution board, 240 volts on surface/recess, complete with tinned copper busbar, netural link, earthbar, dibnbar, detachable gland plates, inter connections, i/c painting, earthing etc. as required busbar in complete in all respects with in all leads and lifts as per direction of Engineer in charge. Single door 8 way |
| 83 | Supplying and fixing following rating, double pole, 240volts, isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required 63Amp Cat-Acomplete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 84 | Providing, installing, testing and commissioning of ceilling fan and regulator i/c wiring the down rod of standard length (upto 30cm with 16/.20 mm twin twisted flexible,cotton braided copper cable including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc as required. Ceiling fan 1400mm sweep Cat.-A complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 85 | Providing and fixing ultra slimdecorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28watt FTL (T5), complete with all accessories (including one no. T-5 tube), connections, testing and commissioning etc. as required. 1x28 watt-FTL (T5) Category-A complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 86 | Providing and fixingfollowing type of surface mounting decorative mirror optics luminaire with powder coated CRCA sheet steel housing, low glare aluminiummirror reflector, pre-wired with 110 V starter & 36/40 w copper ballast for housing CFL (but excluding the cost of CFL), complete with all accessories, connections, testing and commissioning etc. as required.3 x36 watt-CFL(Category-A) complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 87 | Providing and fixing two core service wire 6sqmm thick in all leads and lifts |
| 88 | laying and jointing of G.I pipe for( Scour pipe) with complete in all respects with in all leads and lifts as per direction of Engineer in charge. ( labour rate ) |
| 89 | 50 mm dia |
| 90 | 100 mm dia |
| 91 | Providing and fixing Gun metal wheel valve of all approved make as per specification 50 mm dia complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 92 | Providing and fixingwheel valve of all approved make of following dia including all kinds of leads and lifts complete as per specificationwith in all leads and lifts |
| 93 | 20mm dia. |
| 94 | 25mm dia. |
| 95 | 32 mm dia |
| 96 | 40mm dia. |
| 97 | 50mm dia. |
| 98 | Providing and fixing SFRC man hole cover with frame having frame size of 500 mm internal dia ( The weight of frame should not be less than 100 kg)complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 99 | Providing and placing in horizontal layers filtering media duly graded, screened,cleaned and washed as specifiedcomplete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 100 | Top layer, Fine sand( Eff. Size 0.20mm to 0.40 and uniformity co-effiCSent 2.00 to 3.00). |
| 101 | Second layer, Coarse sand, 3mm - 6mm |
| 102 | Third layer : Bajri 6mm to 20 mm. |
| 103 | Fourth layer : Bajri 20mm to 25 mm |
| 104 | Bottom layer : Broken stone 50mm to 75 mm. |
| 105 | Providing & placing Precast Concrete Block in CC 1:2:4 of size 0.30 x 0.40 x 0.05( I cement :2 sand ;4 graded stone aggrigate 20 mm nominal size)over X Drain complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 106 | Providing and laying cement concrete 1:5:10(1cement:5sand:10 graded stone aggregate of 40mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining walls/breast walls, the size of plums shall usually be 150mm to 300mm as per H.P.P.W.D specification including all leads and lifts |
| 107 | Providing and fixing C.S sluice valve ( with hand wheel ) kilburn , L&T , Standerd / Havels & all approved make as per IS:780 Class-I upto 100 mm dia ( including brass spindaland as per IS; 2906 class- for diameters more than 100 mm complete including all alided accessories. with in all leads and lifts |
| 108 | Providing and fixing 1.80 mtrs heigh fencing with 2.50 mtrs. M.S. angle iron of size 40x40x6mm minimum 2.50 mtrs. C/C with nine horizontal lines and two diagonal of galvanised steel barbed wire (IS-278-1962 type-1) weight of 9.38 Kg./100 mtrs.(minimum) storical and fixed to post complete cost of posts structs and straining bolts shal be paid for separately horizontal and diagonal wire complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 109 | Providing &Fixing of fencing panels of Size 2.40 mtr x 1.20 mtr devided in Two Panels of 1.20 m X 1.20 M by fixing T iron at centre fitted with wire mesh 25 m.m x25mm welded to MS angle frame all around with MS flat cover and seven Nos. hold fasts including cutting welding painting with red oxide paint complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 110 | Providing and fixing PVC pipe 100 mm dia ( outer) for weep hole in R/ Wall , PCC wall i/c with in all leads and lifts as per the direction and to the entire satisfaction of the Engineer-in-charge required at site |
| 111 | Random rubble masonry / Polygonal rubble masonry (coursed or brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 in cement mortar 1:6 (1 cement : 6 sand)in all leads and lifts in foundation and plinth complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
| 112 | Square rubble masonry / Polygonal rubble masonrywith hard stone of approved quality in foundation and plinthin cement mortar 1:6 (1 cement : 6 sand)in all leads and lifts in foundation and plinth complete in all respects with in all leads and lifts as per direction of Engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
