Tender For Construction Of New Anganvadi Building At Jayapuram Ward 25 In Tindivanammunicipality
Tender Value
14 Lakhs
Estimated cost
Bid Submission
24 May 2023
0 days left
EMD
14000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tindivanam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Anganvadi Building At Jayapuram Ward 25 In Tindivanammunicipality
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls AC Sheet Roofing without roof timbers |
| 2 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Terracing work in roof or floor |
| 3 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high |
| 4 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of wallsFloor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs |
| 5 | Earth work excavation in sand silit (or) other loose soil, wet sand sandy loam including excavated earth with initial lead and lift of 1m and 2m respectively etc., complete as per standard specification. |
| 6 | Supplying and filling in foundation and basement with River sand in layers of not more than 15cm thick well rammed, watered and consolidated etc., complete complying with standard specification. |
| 7 | Cement Concrete 1:4:8 (One Cement, Four sand andeight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 8 | Brick work in CM 1:5 (one cement & five sand) using Third Class Country Brick Kiln Burnt of size 8\"X41/4\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 9 | For Foundation and Basement |
| 10 | For Ground floor |
| 11 | Supplying and fabricating in position ofMS or RTS rodsfor RCC work including the costof steel and binding wire and all labour charges for cutting bending tying grill and stengthening and all labour chrges including the fabeication charges etc complete. |
| 12 | Suppying and erecting shuittering including necessary supports for plane surface in foundation and basement for RCC roof slabbeams , column footing, plinth beam, grade beam, criical piers, sill slabs, steps, etc using suitable mild steel sheets of B. G. 10 stiffened with welded suitable mild steel angles for boardings supported by casuarina props 10cm to 13cm dia spaced at suitable intervals etc complete as directed by thr deopartmental officetrs complying with standard specifications. |
| 13 | For coloumn |
| 14 | For Roof slab,lintel,beam etc., |
| 15 | Reinfocedcement concrte 1:1.5:3 mix ( one cement One and half sand and three aggregate ) including the cost and conveyance of all materials and excluding the cost of steel and including thelabour charges for mixing, laying of concrete and curing etc complete as per the standard specifications. |
| 16 | For Foundation and Basement |
| 17 | For Ground floor |
| 18 | Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.38 / 40mm thick |
| 19 | Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick, in all floors etc., complete complying with standard specification, |
| 20 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers. |
| 21 | Manufacturing supply and fixing of steel doors with following specification. MS angles of size 40x40x6mm at 3.5kg/m used for the outer frame and MS angles of size 35x35x5mm at 2.60kg/m for the outer frames. Stiffners with 32x6mm at 1.5kg.m MS flat is provided at the lock rail of the door and welded intact on both sides to the shutter frame, 18gauge CR sheets of best quality is laid as panel in the shutter frames, 18x5mm at 0.70kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS flat on the rear side of the doors and welding the CR sheet for rigidly. Additional stiffners with 18x5mm at 0.7kg/m MS flat are provided diagonallyetc., complete as per standard specification |
| 22 | Fully panelled Double leaf - Door(1.00m x 2.10 m) |
| 23 | Fully panelled Single leaf - Door(0.90 m x 2.00 m) |
| 24 | Fully panelled Double leaf - Window(without Ventilator)1.20 m x 0.90 m |
| 25 | Fully panelled Double leaf - Window(without Ventilator)0.60 m x 0.90 m |
| 26 | Ventilator 0.45 m x 0.60 m |
| 27 | Supply and fixing of FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers etc.,completeTWAD SOR 2019-2020 P.No.146(item No.105a) |
| 28 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 29 | Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality synthetic enamel paint approved colour over the existing red oxide priming coating all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with std charges etc., complete complying with standard specification. (Paints should be got approved by the Executive Engineer before use on work). |
| 30 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 31 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer |
| 32 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 33 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall Modular 5A Switch with its accessories and making good of the concealed portion with suitablecolour forPVC concealed light Point and Fan Point. (5 Points Per Coil) SD-23 |
| 34 | Supply and fixing of 5A / 15 A 3 Pin combined flush typeModular wall socket with 15Amodular flush type switch with its Accessoriesin flush with wallwith connection SD-38 |
| 35 | Supply and fixing of Havells/Philips / CromptonFusion - II - Metallic Matt 1200 MM(48\") AC ceiling fan complete with 300mm down rod on the existing clamp.[Data-M] SD-107 |
| 36 | Supply and fixing of single box type 28W T5flu fitting Philips MIROLTA Slim T5 TMS540 HF 1xTL5-28W/Havells / Crompton makecomplete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.[ Data- J] SD-87 |
| 37 | Drilling of 150 mm dia vertical bore wellin hard rock area includingdrillingcharges and including injectionof casing pipein the drilledhole etc complete (Page No:219) |
| 38 | Supply and delivery of 160 mm dia PVC causing pipe6KSC/CM2 including cost of pipe ea complete |
| 39 | Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete(165 mm/168 mm dia PVC Casing pipes Assembly) |
| 40 | Supply and delivery of Wet type Submergible including all labour charges etc., complete., Submergible Motor 15 lpmx 80m.head 1 H.P (Page No:96) |
| 41 | Supply of 32mm UPVC Pipes specially made fordeep borewell Submersible motor erection (ISI Make)including all cost materials, conveyance labours etc., complete as directed by departmental officers. |
| 42 | Cost and supply of 4Sqm cable 3 core including cost and conveyance of materials etc., complete (Page No:118) |
| 43 | Cost and supply ofNylon rope including cost and conveyance of materials etc., complete |
| 44 | Cost and supply of 32mm GI pipeinculding cost and conveyance of materials etc., complete (Page No:36) |
| 45 | Cost and supply of 32mm GI Couplinginculding cost and conveyance of materials etc., complete (Page No:40) |
| 46 | Cost and supply of 32mm GI Union inculding cost and conveyance of materials etc., complete (Page No:40) |
| 47 | Cost and supply of 32mm GI Gatevalve inculding cost and conveyance of materials etc., complete (Page No:43) |
| 48 | Cost and supply of 32mm GI Elbow inculding cost and conveyance of materials etc., complete |
| 49 | Cost and supply of 32mm GI Tee inculding cost and conveyance of materials etc., complete |
| 50 | Cost and supply of 32mm PVC Ball Valve. inculding cost and conveyance of materials etc., complete |
| 51 | Cost and supply of Brass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type). As per PWD schedule rates pg.no 158 |
| 52 | Cost and supply of 40mm Clamp Set including cost and conveyance of materials cost etc., complete (Page No:42) |
| 53 | Cost and supply of 160 mm pvc end cap including cost and conveyance of materials cost etc., complete |
| 54 | Cost and supply of Panel Boardincluding cost and conveyance of materials cost etc., complete |
| 55 | Labour charges for Errection of submergible Pump set in bore well including fixing and jointing submergible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth values Errection clamps pressure gauges up to the exterior wall of pump room and errction of panel board consisting of TPICN switches starter volmeter ammeter three pilot indicator lamps complete and testing the pump set and trail run for 10 days up to 5 HP.(Page No:226) |
| 56 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,1000 litres TWAD SOR |
| 57 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original conditionwherever found neccessary etc, complete as per standard specification and as directed by theDepartmental Officers. Make: EXCELLENT/ SAFETY FIRST / EQUIVALENT |
| 58 | Cost and supply ofEXHAUST FANS AC Exhaust Fan 450 mm (18”) sweep (Light duty) |
| 59 | Cuddapah Slab Sink of size 600mm x 600mm x 200mm with 32mm dia \"B\" Class G.I. waste water pipe & 32mm dia C.P. waste coupling. |
| 60 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 61 | OVER HEAD MAINS;Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains |
| 62 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.sd 125 |
| 63 | Add GST. 18%(CGST-9%,SGST-9%) |
AI Tender Summary
Tender Timeline
May 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 24, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender