|
| 1 | A) Supply Part |
| 2 | 11 kV HT Line |
| 3 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
| 4 | Steel Tubular Poles (11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro\" and 3 No. Double Pole Dead End Structures) |
| 5 | Steel Tubular Poles (10 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro\" and 3 No. Double Pole Dead End Structures) |
| 6 | Muffs with concerete filling |
| 7 | Run Thro\" Structures (? Formation): on Single Pole Structures (Adopt Eight (8) No. Run-through Structures per Km) - |
| 8 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1500 mm i/ctolerance of 100 mm either side) x 8 structure |
| 9 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1800 mm i/ctolerance of 100 mm either side) x 8 structure |
| 10 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1950 mm i/ctolerance of 100 mm either side) x 8 structure |
| 11 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 750mm . |
| 12 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1070mm . |
| 13 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1250 mm . |
| 14 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
| 15 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
| 16 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure |
| 17 | MS ANGLE 50X50X6 MMFOR SUPPORTING SINGLE POLE X -ARM |
| 18 | MS angle Iron: 50x50x6, Length : 1950 mm for Guardning |
| 19 | Dead End Structures: (Adopt three (3) No. per Km) on Double Pole (Prefer along road side) |
| 20 | Belt Set - MS Angle Iron: 50x50x6, Length :1950 mm x 2 No. |
| 21 | X-Bracing Set - MS Angle Iron:1800, 50x50x6, Length: 2125 mm x 2 No. |
| 22 | MS angle Iron: 50x50x6, Length : 750x2 mm )knee Bracing Set) |
| 23 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
| 24 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
| 25 | HT Stay / Guy Arrangement |
| 26 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
| 27 | HT Egg Insulator |
| 28 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
| 29 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
| 30 | D.O Fuse Unit |
| 31 | Isolator Unit (11kV, 630A, 25 KA ) Tripple pole O/D type |
| 32 | Earthing |
| 33 | HT Earthing set complete (REC Constr. Stand. J-1) |
| 34 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
| 35 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
| 36 | Eye Hook for earth wire |
| 37 | Earth Wire Clamp |
| 38 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
| 39 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro\" structure: 2 No ] |
| 40 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro\" structure: 2 No] |
| 41 | Danger Plate (250X200X1.6 mm) |
| 42 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
| 43 | Barbed Wire |
| 44 | Red Oxide |
| 45 | Aluminium Paint |
| 46 | Mannual Carriage Avreage lead from Road to Site of Work 1.5Km |
| 47 | Transporation |
| 48 | B) Errection Part |
| 49 | Erection Charges |
| 50 | 1) Material is available in HPSEBL Store, if any, will be provided by the HPSEBL. 2) The Successful Bidder will have to submit the Item wise Breakup of Erection Part and Transportation of the Matrial. |
