|
| 1 | Cleaning revoming upraoting of unwanted vegetation burhes uside park periphery etc. complete job as per diection of engineer in Charges includes for badmation couct etc. |
| 2 | Supplyincludingdigging,carryingbylorry,fillingRiverBed Material mixed with coarse sand andround nallah shingle 75mm as per lines, cross sections, grade and camber, including watering &consolidation in layerswith 8-10TonPower Roller Complete ( Finished work including material and labour) |
| 3 | Supplying and stacking at site Good Earth in required thickness with proper gratent ramning etc. |
| 4 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Ordinary cement without any pigment |
| 7 | Providing and fixing of stainless steel benahes in public pancl for 3 secter capacity complete job |
| 8 | Providing and fixing pole havging dustbine of capacity 10 titre each or more made with HDPE Plaster in blue green colour of approved make and design approved by engineer in charge complete with fixed type MS mounting frame made with M.S Hollow tube and panted on the outside with synthetic chanel paint of colour as approved by engineer in charge the cost includer enbedding the fame in ground in a base of Cement conrete 1:3:6 levelling couse of cement conrete 1:5:10 cost of metrinal carriage are all included in the rates |
| 9 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 10 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 12 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate |
| 13 | Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips40 mm wide and 4 mm thick |
| 14 | Providing and fixing one pair of Badminton met with steel table of approved brand at ht. of 2.38m and fixing of net poles in depth of 0.50to 0.80m with cement conerte 1:3:6 mix and refolling etc. complete incl. badmintec net etc. |
| 15 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications |
| 16 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc completeOn steel work |
| 17 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge |
| 18 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work |
| 20 | Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete. |
| 21 | Stone aggregate above 40mm sizefor an avg. lead of 15 Kms. |
| 22 | Sand for an avg. lead of 5 Kms |
| 23 | (Air walker):- Providing, designing and fixing of air swaing in pair of size 1100x550x1480mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated. All pipe are welded with joints as necessary and dressed off removing sharp edges and brrs. Zinc primer paint to be applied at all welding points prior to finishing, pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. all open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete is set, fix the equipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. |
| 24 | (Horse Rider Station):- Providing, designing and fixing of horse eider stationof size 1000x600x1200mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated. usingAll pipe are welded with joints as necessary and dressed off removing sharp edges and burrsZinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made from plastic with rounded edges to prevent any impact ofinjury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. all open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shape welded boths and once the the concreteis set, fix theequipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc |
| 25 | (Leg Press):- Providing, designing and fixing of leg Press of size 2000x550x1600mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm diaall pipes made up of hot rolled tubular steel and hot dipped galvanized and power.All pipe are welded with joints as necessary and dressed off removing sharp edges and burrsZinc primer paint to be applied at all welding points prior to finishing. Pedals and base plate cover shall bemade of plastic with rounded edges to prevent any impact ofinjury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. all open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shape welded boths and once the the concreteis set, fix theequipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. |
| 26 | (Exercising Bar):- Providing, designing and fixing of exercising bar in a pairof size 1800x630x1700mm fabricated with main post of 114mm dia and 2.5mm thickall pipes made up of hot rolled tubular steel and hot dipped galvanized and power coated. All pipe are welded with joints calloped asnecessary and dressed off removing sharp edges and burrs.Zinc primer paint to be applied at all welding points prior to finishing. base plate cover to bemade of plastic with rounded edges to prevent any impact ofinjury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. all open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shape welded boths and once the the concreteis set, fix the equipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. |
| 27 | (Arm Wheel ):- Providing, designing and fixing of arm wheel in a pairof size 870x800x1940mm fabricated with main post of 114mm dia and 2.5mm thickall pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are robotic welded with jointsasnecessary and dressed off removing sharp edges and burrs.Zinc primer paint to be applied at all welding points prior to finishing. base plate cover to bemade of plastic with rounded edges to prevent any impact ofinjury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shape welded boths and once the the concreteis set, fix the equipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. |
| 28 | (Twister Triple ):- Providing, designing and fixing of twisterof size 1400x1400x1350mm fabricated with main post of 114mm dia and 2.5mm thickall pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe are robotic welded with jointsasnecessary and dressed off removing sharp edges and burrs.Zinc primer paint to be applied at all welding points prior to finishing. base plate cover to bemade of plastic with rounded edges to prevent any impact ofinjury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shape welded boths and once the the concreteis set, fix the equipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc |
| 29 | (Cycle ):- Providing, designing and fixing rowing machine of size850x490x1300mm fabricated with main post of 38mm dia and 2.5mm thickall pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe arewelded with jointsasnecessary and dressed off removing sharp edges and burrs.Zinc primer paint to be applied at all welding points prior to finishing. Seat shall be made of plastic with rounded edges to prevent any impact ofinjury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shape welded boths and once the the concreteis set, fix the equipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. |
| 30 | (Waist & Back Relaxer ):- Providing, designing and fixing rowing machine of size1050x830x1500mm fabricated with main post of 114mm dia and 2.5mm thickall pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe arewelded with jointsasnecessary and dressed off removing sharp edges and burrs.Zinc primer paint to be applied at all welding points prior to finishing. Baseplastic cover shall be made of plasticwith rounded edges to prevent any impact ofinjury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shape welded boths and once the the concreteis set, fix the equipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. |
| 31 | (Knee Chair ):- Providing, designing and fixing rowing machine of size740x600x960mm fabricated with main post of 114mm dia and 2.5mm thickall pipes made up of hot rolled tubular steel and hot dipped galvanized and power. All pipe arewelded with jointsasnecessary and dressed off removing sharp edges and burrs.Zinc primer paint to be applied at all welding points prior to finishing. Seat and baseplate cover shall be made of plasticwith rounded edges to prevent any impact ofinjury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self lubricated. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J Shape welded boths and once the the concreteis set, fix the equipment on to it and cover nuts and boths with the base plate. All complete as per direction and approval of engineer-In -Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. |
| 32 | Providing fixing and installation of Children multisystem playing equipment of following description. A) Age Group :- 03-12 yrs b) Area 35 feet (L) X 18 feet (W) X12 feet (H) c) main frame: main structure is made of 60mm , 90mm, 42mm, 34mm, 27mm, OD MS Pipe, 40 x40 x5 angle, FRP Chequred Sheet. d) Capacity :- 15-20 children. The Multisystem playing equipment should consist of three platform with canopy, one FRP Spiral slide, one FRP curve slide one FRP double slide two FRP steps ladder, two FRP Bridge with FRP Railing one tic tac. one army ladder, one single sea saw one single swing. |
