Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited-UPRVUNL has published Tender For Repairing, Reconditioning And Overhauling Work Of Wagon Clamping Power Cylinder, Hydraulic Cylinder, Pulleys, Plumber Blocks, Gear Box, Geared Coupling, Screen Plates, Different Shafts, Hubs, Bearing Housing And Broken Teeth Of Gears Etc. Submission Date for this Tender is 06-07-2023. Industrial Trucks Tenders in kasimpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Jun-2023 | Date Extension | Date | 06-07-2023 |
| Sl. No. | Item Description |
| 1 | Overhauling of Wagon Clamping power cylinder/ hydraulic cylinder (a) Repair of Wagon Clamping power cylinder/ hydraulic cylinder of wagon tippler (b) Fitting of clamping cylinder Seal Kit (M/s Bosch Rexroth make) ( c) Repairing of hydraulic piston eye and piston thread. (d) Fitting of canvass rubber bellows |
| 2 | Repairing of Spare of high-pressure hose pipe of 13 mtr, ID=2.5 inch of wagon tippler. (a) Cutting of damage portion of hose pipes and fitting of End connector (b) Hose Pipe pressure testing. |
| 3 | Repairing of spare high pressure hose pipe of 13 meter, ID 1.5 /1.0 inch of Wagon Tippler. (a) Cutting of damage portion of hose pipes and fitting of End connector (b) Hose Pipe pressure testing. |
| 4 | Repairing of broken Pulley shaft as per scope of work |
| 5 | Shaft dia at hub 170-220mm |
| 6 | Shaft dia at hub 140-160mm |
| 7 | Shaft dia at hub 100-130mm |
| 8 | Repairing of Pulley Shaft at hub as per scope of work. |
| 9 | Shaft dia at hub 170-220mm |
| 10 | Shaft dia at hub 140-160mm |
| 11 | Shaft dia at hub 100-130mm |
| 12 | Repairing of hub of Pulley Shaft as per scope of work. |
| 13 | Shaft dia at hub 170-220mm |
| 14 | Shaft dia at hub 140-160mm |
| 15 | Shaft dia at hub 100-130mm |
| 16 | Repairing of Geared Coupling as per scope of work (size given below) |
| 17 | Shaft dia at hub 170-220mm |
| 18 | Shaft dia at hub 140-160mm |
| 19 | Shaft dia at hub 100-130mm |
| 20 | Rectification of damaged and worn out bearing housing of -vibrating screen/gear box/ Crusher/pulley of stacker reclaimer. |
| 21 | Repairing of broken teeth of input/intermediate/output gear of different gear boxes. |
| 22 | Fabrication of Screen Plate for the Ring Granular Crusher as per sample. (a) Screen Plate Measuring and marking for slot 550X50mm28 nos. and 180X50mm 06 nos. (b) Screen Plate Slot Cutting of slot 550X50mm28 nos. and 180X50mm 06 nos. (c ) Hole for Counter Shunk Bolt 30 mm 06 nos. (d) Bending of Screen Platefor Curvature of required angle |
| 23 | Repairing / Reconditioning & overhauling of various Gear box model no-CKC-280,CKC-250,CKC-450, CKC-355, CSC-200 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
