}

Tender For Repair/ Replacement/ Servicing Of Summer Appliances And Allied Works At Mil Stn Kapurthala Under Ge Kapurthala, kapurthala-Punjab

Military Engineer Services-MES has published Tender For Repair/ Replacement/ Servicing Of Summer Appliances And Allied Works At Mil Stn Kapurthala Under Ge Kapurthala. Submission Date for this Tender is 13-06-2023. Air Conditioner Tenders in kapurthala Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

37681680
Corrigendum : Tender For Repair/ Replacement/ Servicing Of Summer Appliances And Allied Works At Mil Stn Kapurthala Under Ge Kapurthala
Open Tender
Indian
Punjab
kapurthala
13-06-2023

Tender Details

Repair/ Replacement/ Servicing Of Summer Appliances And Allied Works At Mil Stn Kapurthala Under Ge Kapurthala

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 06-Jun-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 13-06-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 40000.0 /-
Tender Value
INR 20 Lakhs /-

BOQ Items

Name of Work : REPAIR/ REPLACEMENT/ SERVICING OF SUMMER APPLIANCES AND ALLIED WORKS AT MIL STN KAPURTHALA UNDER GE KAPURTHALA
Sl. No. Item Description
1Maintenance, servicing and testing of split type/window type AC, capacity upto1.50/2 tons, any make, by cleaning cooling coil, condenser fins, blowing of dust from machines/air filters, checking and decarbonising all electric system oiling/greasing of blower motor, checking and removing any vibration and leakage in the equipment including checking/repair to inter locking device for winter/summer to ensure cutting off of compressor/heating in case of failure of blower motor including taking down and refixing in position complete all as specified and directed by Engr-in-Charge. Note - Cost of minor repair, replacement of petty items such as nuts, bolts, washers, screws, rubber mounting pads of compressor etc, transportation of equipment to workshop and back is deemed to be inclusive in the unit rates quoted by the contractor.
2Supply and fix in replacement, new compressor for split type / window type AC 1.5 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system complete all as specified and directed by Engr-in-Charge. Make: Shriram/ Kirloskar/Voltas/ Carrier/Whirlpool Note: Compressor shall be tested to entire satisfaction of Engr-in-Charge and test results recorded and kept on charge.
3Supply and fix in replacement, new compressor hermetic/rotary for split type / window type AC of 2.00 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system complete all as specified and directed by Engr-in-Charge. Make: Shriram/ Kirloskar/Voltas/Carrier/Whirlpool Note: Compressor shall be tested to entire satisfaction of Engr-in-Charge and test results recorded and kept on charge.
4Supply and fix in replacement; starting relay suitable for window type AC of capacity up to 2 ton complete all as specified and directed by Engr-in-Charge. Make : Shriram/Renutrol or equivalent.
5Supply and fix in replacement; over load protection suitable for window type AC of capacity up to 2 ton complete all as specified and as directed by Engineer-in-Charge. Make : Shriram/Renutrol or equivalent.
6Supply and fix in replacement;thermostat switch suitable for window type AC of capacity up to 2 ton complete all as specified and directed by Engr-in-Charge. Make : Shriram/Renutrol or equivalent.
7Supply and fix in replacement, blower motor 1/8 HP, double shaft, single phase suitable for window type AC up to 2 ton capacity including testing complete all as specified and directed by Engr-in-Charge. Make: Khaitan/ Universal or equivalent.
8Supply and fixin replacement, front grill for window type AC up to 2 ton capacity complete all as specified and as directed by Engineer-in-Charge. Make: Blue Star/Usha/General.
9Supply and fix in replacement, internal unit completefor split type AC 1.5 Ton capacity, comprising of blower motor, fan blade with rotor, evaporator with suitable filter, remote control system along with outer shell complete all as specified and directed by Engr-in-Charge. Make: Blue star/LG/Hithachi./Voltas
10Supply and fix in replacement; external unit includingcompressorfor split type AC 1.5 Ton capacity, comprising of condenser oil, blower motor, blower fan, copper valve ½” & 5/8” with hot and cold arrangement including copper condensor coil complete all as specified andas directed by Engineer-in-Charge.
11Supply and fix in replacement; power circuit breaker (PCB) kit for split/window type ACfor 2 ton complete all as specified and directed by Engr-in-Charge.
12Material and labour for trickle charging of gas F-22 or as required in AC, any capacity, after detection of leakage with soap solution/halide torch ,making the system leak proof by brazing/ soldering the leakage point, flushing out the moisture contentstrapped in the pipe line by charging CO2 gasand maintaining the pressure forprescribed period complete all as specified and directed by Engr-in-Charge.
13Supply and fix in replacement; blower motor 1/8 HP, single phase suitable for desert cooler including testing, complete all as specified and directed by Engr-in-Charge.
14Material and labour for taking down existing unserviceable fan motor from desert cooler and including replacement of wornout winding, bushes and bearing etc refixing, connectingand testing complete all as specified and directed by Engr-in-Charge.
15Supply and fix in replacement of water lifting submersible pump suitable for desert cooler as per existing capacity complete all as specified and directed by Engr-in-Charge.
16Supply and fix in replacement;selector switch three speed (low, medium and high) suitable for desert coolers including taking out unserviceable selector switch complete all as specified and directed by Engr-in-Charge.
17Supply and fix PVC pipe 15mm dia suitable for desert coolers including taking out unserviceable PVC pipe complete all as specified and directed by Engr-in-Charge.
18Supply and fix cooler pad made of Khas-Khas suitable for desertcoolers including taking out unserviceable pads complete all as specified and directed by Engr-in-Charge.
19Supply and fix starting capacitor 40 MFD 230 Volts including taking out unserviceable capacitor, including testing complete all as specified and directed by Engr-in-Charge. Make : Keil / Asian /Tesla.
20Supply and fix in replacement; Fan blade of desert cooler heavy duty HDPE suitable for 4000/5000 CFT cap complete all as specified and directed by Engr-in-Charge.
21Supply and fix in replacement; copper conductor cable 40/0.0076 Sqmm 3 core not less than 3 mtrs long with plug top 5 Amp suitable for desert cooler complete all as specified and directed by Engr-in-Charge.
22Supply and fix in replacement; new compressor for water cooler of capacity 40/80 Ltr, deep freezer capacity 200 to 300 Ltr including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified and directed by Engr-in-Charge.
23Supply and fix in replacement; new compressor for water cooler of capacity 60/120 Ltr,including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified and directed by Engr-in-Charge.
24Supply and fix in replacement; blower motor 1/35 HPwith base and clamp, rubber mountings for water coolers including taking out the old unserviceable motor complete all as specified and directed by Engr-in-Charge.
25Material and labour for rewinding of blower motor of water cooler40/80 litres capacity any make with super enamelled copper wire including replacement of wornout bushes etc and testing complete all as specified and directed by Engr-in-Charge.
26Material and labour for rewinding of blowerof Deep freezer hard top 200 litres capacity having single door any make with super enamelled copper wire including of wornout bushes etc and testing complete all as specified and directed by Engr-in-Charge.
27Material and labour for trickle charging of gas F-12 or as required in water cooler, any capacity, after detection of leakage with soap solution/halide torch ,making the system leak proof by brazing/ soldering the leakage point, flushing out the moisture contentstrapped in the pipe line by charging CO2 gasand maintaining the pressure forprescribed period complete all as specified and directed by Engr-in-Charge.
28Supply and fix in replacement; push type water tap, 15 mm dia, chromium plated suitable for water cooler complete all as specified and directed by Engr-in-Charge.
29Supply and fix in replacement, thermostat switch suitable for water cooler, any capacity/make including taking down unserviceable thermostat switch complete all as specified and directed by Engr-in-Charge.
30Supply and fix in replacement; new compressor for refrigerator of capacity 286/310 Ltr including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified and directed by Engr-in-Charge.
31Material and labour for trickle charging of gas F-12 or as required in refrigerator of capacity 286/310 Ltr, after detection of leakage with soap solution/halide torch ,making the system leak proof by brazing/ soldering the leakage point, flushing out the moisture contentstrapped in the pipe line by charging CO2 gasand maintaining the pressure forprescribed period complete all as specified and directed by Engr-in-Charge.
32Supply and fix in replacement; thermostat switch for refrigerator of different capacity/make including taking out old unserviceable thermostat switch complete all as specified and directed by Engr-in-Charge.
33Supply and fix in replacement; capillary tube made of copper, any size suitable for Refrigerator/Water Cooler including taking out old unserviceable capillary tube complete all as specified and directed by Engr-in-Charge.
34Supply and fix in replacement;capillary filter drier 2 way suitable for water cooler including taking out old unserviceable capillary filter complete all as specified and directed by Engr-in-Charge.
35Supply and fix in replacement; tubular heating element 1500 Watt, complete all as specified and directed by Engr-in-Charge.
36Supply and fix in replacement; heating element 2000 Watt, complete all as specified .
37Supply and fix in repair heating element for solar water heater capacity 3000 watt, complete all as specified and directed by Engr-in-Charge.
38Taking out existing hot water pipe line and fixing the same after cleaning including refixing arrangement such as hooks, glass wool and aluminium cladding etc including required fitting complete all as specified and directed by Engr-in-Charge. of the following sizes:-
39a) 20 mm dia,heavy grade.
40b) 25mm dia,heavy grade.
41S&F hot water pipe line (heavy grade) duly insulated with glass wool and aluminium cladding complete all as specified and directed by Engr-in-Charge. of the following sizes:-
42a) 20 mm dia,heavy grade.
43b) 25mm dia,heavy grade.
44Supply and fix in replacement; thermostat for Geyser of capacity 50 Ltr/25 Ltr complete all as specified and directed by Engr-in-Charge. Make : Renutrol/Theta or equivalent.
45Supply and fix in replacement; safety valve for any capacity of Geyser complete all as specified and directed by Engr-in-Charge.
46Supply and fix in replacement;15mm outer diaPVC connection for hot and cold water pipe 450mm long, with adaptors ofbrass jem nuts and rubber washers, both side complete all as specified and directed by Engr-in-Charge.
47Supply, Install, Test and Commissioning of Voltage Stabilizerhaving following features i .e. high power efficiency intelligant time delay system (3 mnts + /- 20 sec ITDS ) inrush current capacity etc for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 270 V with output voltage stabilized at 230V with accuracy of +/- 2.5% and of capacity 2.0 KVA compete Model No VG 400 of v- Guard or equivalentin blue star /vertex
48Supply, Install, Test and Commissioning of Voltage Stabilizerhaving following features i .e. high power efficiency intelligant time delay system (3 mnts + /- 20 sec ITDS ) inrush current capacity etc for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 270 V with output voltage stabilized at 230V with accuracy of +/- 2.5% and of capacity 5.0 KVA compete Model No VG 400 of v- Guard or equivalentin blue star /vertex
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail