| 1 | Diesel, Load Capacity:2 cu.m, Vehicle emission Norms :BS –VI, No of cylinder in engine:2 - 4 Cylinder, Length of chassis:3800 mm- 3950 mm, Width of chassis:1500 mm – 1550 mm Ground Clearance 150mm - 165mm, Fuel tank Capacity :30 Ltrs - 40 Ltrs, Size of Tyres & Nos : 145 R 12 – 5 Nos., Wheel base : 1900 mm – 2250 mm, Gross vehicle weight : 1550 kg -1900 kg, Clutch: Single plate dry friction diaphragm, Transmission System : Manual, No of Speed / Forward gears : 4 Nos Speads (4F+1R)., Type of Steering: Manual / Power, Speed Governers : Shall be fitted, Pay Load:800Kg to 1000Kg, Tipper body length : 2100 mm – 2200 mm, Mild Steel, Tipper body Width : 1400 mm - 1500 mm, Mild Steel, Tipper body Height: 750 mm – 950 mm, Mild Steel, Side Portion (LH & RH) & rear doors Sheet thickness : 2mm, Mild Steel, Tipper Body Top Sheet including frame sheet thickness : 1.6mm, Mild Steel, Tipper Body Top Lid Sheet thickness : 1.2mm, Mild Steel, Tipper container material : Tipper Container should be Fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. A partition should be provided on the middle of container along the vertical length of the body, Tipper body top lid main sheet thickness : 75 x 40 x 6 mm, hydraulic cylinder make : Reputed Make, Hydraulic system Driven: Main engine, Pump make : As per IS standard, Painting: Should be painted with one coat of Anti-ocrrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistence for weatherizing and breakage. The color shade should be as per norms., Lettering: To be carried out as directed by Dept officers., Tipper body rear door : Shall be with necessary locking facility, Side safety guard : Shall be provided as per RTO requirement, Additional Conditions : Vehicle with Fuel sensor and GPS tracking, Warrenty Distance/Year: 25000KM/12 months whichever is earlier, Including GST |
