Repair And Renovation Of Civil Works Of Govt. Model School, Manikchak, Malda .
Tender Value
5.46 Lakhs
Estimated cost
Bid Submission
24 May 2023
0 days left
EMD
10939
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
manikchak → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Of Civil Works Of Govt. Model School, Manikchak, Malda .
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. In first floor |
| 3 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagingwhere necessary (Ground floor).[Excluding cost of chipping over concrete surfaces.(ii) With 1:6 cement mortar (b) 15 mm thick plasterIn Ground floor |
| 4 | In first floor |
| 5 | (ii) With 1:4 cement mortar(c) 10 mm thick plasterIn Ground floor |
| 6 | In first floor |
| 7 | (ii) With 1:6 cement mortar(b) 20 mm thick plasterIn Ground floor |
| 8 | In first floor |
| 9 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.In first floor |
| 10 | Ordinary Cement concrete (mix 1:1.5:3)with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur VarietyIn first floor |
| 11 | Reinforcement for reinforced concrete work inall sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length,and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.In first floor |
| 12 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge.In first floor |
| 13 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.In first floor |
| 14 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately).(a) Upto area 2.5Sq.mIn Ground floor |
| 15 | In first floor |
| 16 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete,Iron Butt Hinges and M.S clamps. (e) Sal : MalayasianIn Ground floor |
| 17 | In first floor |
| 18 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu,Gamar, Champ,Badam,Bhola, Mogra, Hallak.In Ground floor |
| 19 | In first floor |
| 20 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid coreand internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:(a) 35mm thick shutters (single leaf)In Ground floor |
| 21 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.(i) 32 mm thickIn Ground floor |
| 22 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria. (i) 66mm x 90mmIn Ground floor |
| 23 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(a) 40mm X 6mm, 250mm LengthIn Ground floor and first floor |
| 24 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm.In Ground floor and first floor |
| 25 | (i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(b) 250mm long |
| 26 | Anodised aluminium skeleton bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 204/74) fitted and fixed with cadmiim plated screws:(i) 225mm long x 10mm dia. Bolt |
| 27 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(ix) 300mm long x 10mm dia. bolt. |
| 28 | (iv) 150mm long x 10mm dia. bolt. |
| 29 | Anodised aluiminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal / Round rod)(vi) 150 mm grip x 10 mm dia rod. |
| 30 | Supplying, fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs.b) with 75mm iron Butt-hingeii) Sal : Malayasian |
| 31 | (a) Supplying \"Godrej\" mortice lock chromium plated with latch and keys 4 levers,including fitting and fixing complete.In Ground floor |
| 32 | ii) Godrej Hydraulic door closer fitted and fixed complete.(b) Medium typeIn Ground floor |
| 33 | (ii) Door stopper (Anodised aluminium) |
| 34 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.In Ground floor |
| 35 | (ii) Grill weighing above 16 Kg./sq.mtr and aboveIn 1st floor |
| 36 | (b) Extra for work in grill gate.(I) For hanging and locking arrangements including supply of materials and labour complete.In 1st floor |
| 37 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.In 1st floor |
| 38 | Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coatsIn Ground floor |
| 39 | Washing and cleaning with oxalic acid powder using 33 gms./sq.m.(b) Floor/ dado other than marble |
| 40 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.(iv) Two point nose steel handle including fitting and fixing. |
| 41 | (vi)steel peg stay 300 mm long including fitting and fixing. |
| 42 | Welding in M.S. structural work with gas or electric:(a) Tack weld |
| 43 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall).(i) 3 mm thick (weighing 7.4 kg/Sq.m) |
| 44 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii)110 mm. Dia. |
| 45 | (i) 75 mm. Dia. |
| 46 | B) UPVC Fittings:a)Plain Tee(ii)110 mm. Dia. |
| 47 | c) Bend 87.5 degree (ii)110 mm. Dia. |
| 48 | (i)75 mm. Dia. |
| 49 | d) Shoe(ii)110 mm. Dia. |
AI Tender Summary
Tender Timeline
May 15, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender