Tender For Construction Of 40 Nos. Of Firemen Quarters With Development Works At Perumbakkam In Chengalpattu District Under Cm Announcement Scheme
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 May 2023
0 days left
EMD
6.33 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
perumbakkam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 40 Nos. Of Firemen Quarters With Development Works At Perumbakkam In Chengalpattu District Under Cm Announcement Scheme
BOQ
| Sl. No. | Item Description |
| 1 | 1.1) Earth work excavation in all soils (including refilling)a. 0 to 2 mt. |
| 2 | b. 2 to 3 mt. |
| 3 | 1.5) Earth work excavation for Open foundation (excluding refilling)a. 0 to 2 mt. |
| 4 | b. 2 to 3 mt. |
| 5 | 7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint |
| 6 | 13.1) Filling with Excavated Earth |
| 7 | 15.1) Cuddappa slab 20 mm tk.for C/Bslab.a. In Stilt / Ground floor |
| 8 | b. In First floor |
| 9 | c. In Second floor |
| 10 | d. In Third floor |
| 11 | e. In Fourth floor |
| 12 | f.In Fifth floor |
| 13 | 15.2) Cuddappa slab 40 mm tk.for C/Bslab.a. In Stilt / Ground floor |
| 14 | b. In First floor |
| 15 | c. In Second floor |
| 16 | d. In Third floor |
| 17 | e.In Fourth floor |
| 18 | f.In Fifth floor |
| 19 | 21.2) Teak wood Wrought & Put upa. T.W. over 2 m & below 3 m |
| 20 | b. T.W. below 2 m length. |
| 21 | 23.3) Supplying & fixingof Magnetic door catches |
| 22 | 25) M.S.Holdfast |
| 23 | 30) Ellispattern |
| 24 | 31) Weathering course |
| 25 | 37.1) White washing 3 coats(slaked) |
| 26 | 39) M.S Grills |
| 27 | 40) Painting - New \"wood work\" |
| 28 | 41) Painting - New \"iron work\" |
| 29 | 45.2) Stucco Plastering 12mm thick using colour Marble chips of size 10mm and below using 72 kgs of cement and 0.15 m3 colour marble chips |
| 30 | 46) Supplying & fixing20 mm dia Alu. Hanger Rod |
| 31 | 47) Supplying & fixingAluTowel rail 75 cm long |
| 32 | 48) Supplying & fixing5 pin Coat stand |
| 33 | 49) Supplying & fixingchromium plated 8 guage Picture Hook |
| 34 | 50.3) Supply and planting avenue trees |
| 35 | 50.4) Providing Tree guard |
| 36 | 52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls) |
| 37 | 53.3) C.I. Steps ( 5 kg) |
| 38 | Electrical arrangement72) Box type Fibre Fan hook |
| 39 | 74) Charges for fixing of \"Fan\" |
| 40 | 76) 8 SWG wire |
| 41 | 77.3) Supplying & fixingof TV/Telephone line Socket |
| 42 | 77.4)Supplying & fixingof 20mm dia PVC pipe for TV/Telephone line |
| 43 | 78) Earthing Station IS3043 (Type I) |
| 44 | 86) Anti termite treatment |
| 45 | 112) Supplying & fixingof Exhaust Fan 300mm dia |
| 46 | 238) Anticorrosive treatment for steel grills |
| 47 | Annexure1.5.3) Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers |
| 48 | 2.1.1) Filling C.S. sand |
| 49 | 2.15) Supplying and filling stone dust |
| 50 | 3.1.3) C.C.1:5:10 for Foundation & Basement |
| 51 | 3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works |
| 52 | 3.6.2.1) Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification |
| 53 | 6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9\" x 4 1/2\"x 3\") |
| 54 | 8.2.3.1) Standardised concrete Mix M30 Grade Concretea. In Foundation and basement |
| 55 | b. Stilt / Ground Floor |
| 56 | c. In First Floor |
| 57 | d. In Second Floor |
| 58 | e. In Third floor |
| 59 | f.In fourth floor |
| 60 | g.In fifth floor |
| 61 | h.In sixth floor |
| 62 | 9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9\" x 4 1/2\"x 3\")a. In Ground Floor/Stilt floor |
| 63 | b. In First Floor |
| 64 | c. In Second Floor |
| 65 | d. In Third Floor |
| 66 | e. In Fourth Floor |
| 67 | f.In Fifth floor |
| 68 | g.In sixth floor |
| 69 | 10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9\" x 4 1/2\"x 3\") 114 mm tk (B.P.)b. In Ground Floor/stilt floor |
| 70 | c. In First Floor |
| 71 | d. In Second Floor |
| 72 | e. In Third Floor |
| 73 | f. In Fourth Floor |
| 74 | g.In Fifth floor |
| 75 | 11.2.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9\" x 4 1/2\"x 3\") 75 mm tk (B.P.)b. In First Floor |
| 76 | c. In Second Floor |
| 77 | d. In Third Floor |
| 78 | e. In Fourth Floor |
| 79 | F. In fifth Floor |
| 80 | 12.1.2) Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thicka. In Stilt /Ground Floor |
| 81 | b. In First Floor |
| 82 | c. In Second Floor |
| 83 | d. In Third Floor |
| 84 | e. In Fourth Floor |
| 85 | F. In fifth Floor |
| 86 | 16.5) Precast Jally ventilator 50mm tk.using standardised concrete mix M30 without vibrating chargesa. In Stilt/Ground floor |
| 87 | 18.1) Formwork using M.S.Sheeta.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc., |
| 88 | b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works |
| 89 | c.For Square and rectangular columns and small quantities |
| 90 | d.Vertical wall |
| 91 | f.Curved surface |
| 92 | 21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame |
| 93 | 21.6.2.2) R.C.C.Door frames of size 100 x 75mm with one edge grooves size \"t\" x 20 mm using M30grade ( with out vibrating charges)a. 900 x 2100 mm |
| 94 | 22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer. |
| 95 | 23.1.8) TW styles & rails with 9mm thick BWR single leaf door shutterswith brass screws size of 900 x 2100 mm |
| 96 | 26.1) Flooring in C.C.1:5:10 |
| 97 | 27.1.2) B.W. in C.M. 1:4 for staircase steps Chamberburnt bricks 23 x 11.2 x 7 cm. |
| 98 | 28.1) Floor plastering in C.M. 1:4, 20 mm tk. |
| 99 | 29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk |
| 100 | 29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). |
| 101 | 32.1.1) Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 |
| 102 | 33.2.1) Plastering in C.M. 1:5, 12 mm tk. |
| 103 | 34.2.1) ) Plastering in C.M. 1:4, 12 mm tk. |
| 104 | 35.2.1) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. |
| 105 | 36.1) Cement mortar Border inC.M. 1:5, 12 mm tk.a. 150 mm wide |
| 106 | b. 75 mm wide |
| 107 | c. 50 mm wide |
| 108 | 43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(BINDING WIRE insulated with PVC) |
| 109 | 44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slaba). Providing pit (M30) |
| 110 | b) Augering 30cm dia |
| 111 | 44.5.3.1) Providing Rain Water Harvesting well ring in circular shape of 90cm dia, 60cm depth (30cm depth 2 Nos) 50mm thickness using standardised concrete mix M30 grade |
| 112 | 44.6.1) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe(UPVC SPECIAL CLAMP ) |
| 113 | 50.2.1) Providing precast Kerb stone in C.C. 1:3:6,450 x 300 x 150 mm |
| 114 | 50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board |
| 115 | 52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 withUPVC Specials a. 32 mm dia |
| 116 | b. 25 mm dia |
| 117 | 52.4) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 withUPVC Specials (fully consealed in walls)c. 20mm dia PVC water supply ASTM pipe |
| 118 | 52.5) Supply of 75mm dia PVC pipes |
| 119 | 52.9) Supply and fixing of 50mm dia MS clamp set |
| 120 | 53.4) Supplying & fixingof C.I Manhole cover 60 x 60 cm (50kg weight ) |
| 121 | 53.5) Wash HandBasin of size 550 x 400 mm (White without Pedestal) |
| 122 | 54.2.1) Supplying & fixingof 15mm dia Engineering Polymer Tap (long body ) for coastal area only |
| 123 | 54.2.2) Supplying & fixingof 15mm dia Engineering Polymer Tapshort body tap for coastal area only |
| 124 | 56.3.1) Supplying & fixingof Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade \" P\" or \"S\" trap - in G.F. |
| 125 | 56.4.1) Supplying & fixingof Indian Water closet white glazed (Oriya type) of size 580 x 440mmwith PVC SWR grade \" P\" or \"S\" trap- Other thanG.F. |
| 126 | 57.1.1) Supplying & fixingof E.W.C.(White) 500 mmwith \"P\" or \"S\" TRAP with double flapped seat & seat cover |
| 127 | 58.3) PVC SWR pipe (Soil line) with ISI mark - type \"B\".a. 110 mm dia. |
| 128 | b. 75 mm dia. |
| 129 | 58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - \"B\" with relevant specials. |
| 130 | 59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm |
| 131 | 60.1) PVC Nahani trap (4way/2way) |
| 132 | 61.3) UPVC Non Pressurepipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003a. 110 mm UPVC Non Pressurepipe |
| 133 | b. 160 mm UPVC Non Pressurepipe |
| 134 | 64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.( PVC Box , Fire Retarded Box) a. Light point with ceiling rose |
| 135 | b. Light point without ceiling rose |
| 136 | c. Calling bell point with Buzzer/Calling bell |
| 137 | 65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box ) |
| 138 | 66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box ) |
| 139 | 67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself. |
| 140 | 68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box ) |
| 141 | 69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box) |
| 142 | 70.5.2) Supply and fixing of 4\" long 18 W Crystal Glass LEDtube Light |
| 143 | 70.5.4) Supply and fixing of 2\" long 10 W batten LED fitting complete with all accessories on wall / ceiling |
| 144 | 75.2) Supply and delivery of48\" (1200 mm) Fan with ISI mark with Eletcronic Dimmer |
| 145 | 77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. |
| 146 | 81.1) Supply and fixing of TNEB meter board suitable for 3 phases connection . |
| 147 | 82.2) Providing and fixing of lightning conducter finial, made of 25 mm dia 300 mm long, copper tube, |
| 148 | 82.3) Supply, installation, testing & commissioning of 100mm dia cast iron earth electrode |
| 149 | 82.3.1) Supply and fixing of LED Streetlighting luminaries suitable for fixing 25 watts LED lamp |
| 150 | 82.4) Supply and fixing oftwin arm suitable for100 W BC lamp / 6 WLED lamp |
| 151 | 82.5) Emergency LightingSupply, Installation, Testing and Commissioning of 3 KVA invertor with 30 Min battery back-up, Single Phase |
| 152 | 84.3) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. |
| 153 | 85.4) Supply and run of 50 mm dia GI pipe on wall |
| 154 | 93.1) Plastering with CM 1:3, 12mm with WPC |
| 155 | 96.7) Supply and Laying Rubber Moulded Hyraulic Pressed Paver Block 83 mm thick including labour charges for laying etc |
| 156 | 98.5.1)TW panelledsingle door shutter with brass fittings.a. 1000X2100mm.(Single leaf) For Qtrs |
| 157 | 105.1) 4 x 4Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection |
| 158 | 144.3.1) Supply and fixing of 80W LED street light |
| 159 | 149.3.1) Supply and erection of hot dip galvanized 7.0m. Free standing Double Arm bracket 8 sided octogonally . |
| 160 | 149.3.2) Supply and fixing of SMC fuse box ( IP 65 rating) containing 1 No. 32 A 4 way terminal block, 1 No. 10A,10 KA TPN |
| 161 | 149.3.3) supply and fixing of 40 mm dia GI pipe fixed to the octagonal street light pole |
| 162 | 151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL)a) 3.5 cx 185 sq.mm. PVC LTUG aluminium armoured cable |
| 163 | b) 3 .5 c x 120sq.mm. PVC LTUG aluminium armoured cable |
| 164 | c) 3.5 c x 25sq.mm. PVC LTUG aluminium armoured cable |
| 165 | d) 4 c x 16sq.mm. PVC LTUG aluminium armoured cable |
| 166 | e) 4 c x 10sq.mm. PVC LTUG aluminium armoured cable |
| 167 | f) 2 c x 10sq.mm. PVC LTUG aluminium armoured cable |
| 168 | 155.1) Supply and erection of 250Amps floor mounting type metering panel board (Cubical type) OF SIZE 10\"x6\"x1.5\" with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system |
| 169 | 155.2) Supply and erection of 200 Amps capacity floor mounting type metering cubical type panel board |
| 170 | 155.3) Supply and erection of 125Amps floor mounting type metering panel board (Cubical type) |
| 171 | 155.4) Supply and erection of 63 Amps capacity floor mounting panel board (Cubical type) with bus bar |
| 172 | 161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cablea) 3.5 c x 185sq.mm. PVC LTUG aluminium armoured cable |
| 173 | b) 3 .5 c x 120sq.mm. PVC LTUG aluminium armoured cable |
| 174 | c) 3.5 c x 25sq.mm. PVC LTUG aluminium armoured cable |
| 175 | d) 4 c x 16sq.mm. PVC LTUG aluminium armoured cable |
| 176 | e) 4 c x 10sq.mm. PVC LTUG aluminium armoured cable |
| 177 | f) 2 c x 10sq.mm. PVC LTUG aluminium armoured cable |
| 178 | 161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cablea) 3.5 c x 185 sqmm PVC LTUG aluminium armouredcable |
| 179 | b) 3 .5 c x 120sq.mm. PVC LTUG aluminium armoured cable |
| 180 | c) 3.5 c x 25sq.mm. PVC LTUG aluminium armoured cable |
| 181 | d) 4 c x 16sq.mm. PVC LTUG aluminium armoured cable |
| 182 | e) 4 c x 10sq.mm. PVC LTUG aluminium armoured cable |
| 183 | f) 2 c x 10sq.mm. PVC LTUG aluminium armoured cable |
| 184 | 162.2.1) Supplying and clamping of PVC armoured LTUG cable(Above GL)c) 4 core 2.5sqmm. PVC LTUG aluminium armoured cable from alternator to the proposed DG panel on wall |
| 185 | 171.2.8) Supply and delivery of clear water vertical wet type submersible pumpset 75 LPM x 50m |
| 186 | 171.2.9) Supply and Delivery of Openwell Pumpset with ISI mark IS 8034 without Panel Board of capacity 900 LPM X 60M |
| 187 | 175.1.6) Supplying, Fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connectiona. 40 A TPN 10 kA MCB |
| 188 | b. 10/20/32A DP MCB |
| 189 | c. 63A TPN MCB |
| 190 | 175.2.1) Supply and fixing of vertical type 4 way triple pole and neutral MCB sheet steel enclosure with bus and neutral link |
| 191 | 178)Earthing Station using Pipe electrode as per IS 3043 using 2.1 m of 40 mm dia and 0.15 m of 19 mm dia B Class. GI pipe |
| 192 | 179) Plate earthing with copper plate of size 600 x 600 x 3 mm |
| 193 | 179.1) Providing and fixing 25mm x 3mm copper strip on surface or in recess for connections as required |
| 194 | 179.2) Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral |
| 195 | 180) Supply and run of 2 of No.8 copper wire for earth connections |
| 196 | 180.2.1) Labour charge for laying of followingPVC insulated and sheathed flat type copper cable (below GL)a) 3 core 4 sqmm PVC insulated and sheathed flat type copper cable . |
| 197 | 180.2.2) Labour charge for laying of followingPVC insulated and sheathed flat type copper cable (above GL )a) 3 core 6 sqmm PVC insulated and sheathed flat type copper cable . |
| 198 | 202.1) Supplying and fixing of 100mm dia GI pipe |
| 199 | 205.2) Providing and fixing G.I. tape 25 mm x 6 mm thick (For horizontal run) |
| 200 | 205.3) Providing and fixing G.I. tape 25 mm x 6 mm thick(For vertical run) |
| 201 | 207.3.1) Providingtwo coats of Plastic Emulsion paint including primer for inner walls |
| 202 | 207.4.1) Painting the new walls with two coats of approved best exterior Emulsion paint in addition to one coat of approved primer paint over cement plastered wall surfaces |
| 203 | 213.1) Supplying & fixingof SFRC manhole cover 600x600mm |
| 204 | 238.1) Anticorrosive treatment for window grills |
| 205 | 255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holdera) 9watts LED bulb |
| 206 | b) 12 watts LED bulb |
| 207 | 255.6) Supply and fixing ofBulk Head fitting suitable for12W LED Bulb |
| 208 | 344.2) Supplying & fixingof Bevelled edge mirror 500 x 400 x 5.5mm |
| 209 | 359.3.1) Concrete designer tiles flooring |
| 210 | 361.5) Vitrified Tiles flooring (Ivory) |
| 211 | 367.1) Providing wooden Melamine polish for new wood work |
| 212 | 379.7.1.1)Supplying and fixing of PVC Trims / Corners beeding suitable colour in toilet wall cladding in all floors |
| 213 | 379.8.2)Supplying & fixingof Granite tile of size 2\"x 1\", 10mm Thick For kitchen arrangements (jet black) C.M 1:3, 10mm tkb. In First floor |
| 214 | c. In Second floor |
| 215 | d. In Third floor |
| 216 | e. In Fourth floor |
| 217 | f. In Fifth floor |
| 218 | 379.8.5) Supplying and fixing of Ruby Red / Raw silk colour Granite Tiles of 10mm thk (wall Cladding ) in C.M 1:2 |
| 219 | 379.9.2) SSupplyingand fixing of rubber round column guards of size 550mm x 75mm x 10 mm on the existing R.C.C Columns corner surface |
| 220 | 379.9.3) Supplyingand fixing of plastic speed Breakers of size 500mm x 425mm x 75 mm and existing concrete roads |
| 221 | 379.9.4) Supplying and fixing of Convex Mirror 60cm dia with plastic caver |
| 222 | 382) Supplying & fixingof Cuddapah sink 600 x 600 x 200mm |
| 223 | 383.1) Providing single nosing to the edges of Granite slabat entrance steps |
| 224 | 384) Supplying & fixingof PVC flushing cistern |
| 225 | 451.3.2) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittingsa) CP two Way bib cock with health faucet |
| 226 | b) CP Shower Arm with Overhead shower rose |
| 227 | c) CP Angle valve Stop cock |
| 228 | 503.1) Supply and laying of required dia of Nylon rope |
| 229 | 504.5) Supplying, laying, fixing and jointing the following UPVC pipes as perD- 1785 of schedule 40 (Above GL)a. 65mm dia UPVC pipes (Above Ground level) |
| 230 | 516.1) Coil earth to steet light poles with No.8SWG GI wire of 11.5 mtrs of length |
| 231 | 608) Supply and fixing UPVC Pipe (below Ground level)a.40mm dia UPVC pipes |
| 232 | b.50mm dia UPVC pipes |
| 233 | c. 80mm dia UPVC pipes |
| 234 | 609.6) Supply and delivery of 150mm OD ofPVC casing pipes (6kglcm2) as per IS 12818 |
| 235 | 609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kglcm2) |
| 236 | 609.6.2) 200mm OD ofPVC casing pipes (6kglcm2) as per IS 12818 2010 of approved quality for borewells |
| 237 | 609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) i) l50mm dia casing pipes assembly |
| 238 | 615.2.1) Labour charges for the erection of submersible pumpset in borewell/openwella)Up to 5 HP |
| 239 | b) 10 HP |
| 240 | 615.3.1) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpseta)Up to 3 HP |
| 241 | a)Up to 5 HP |
| 242 | 619)Supply and fixing of following dia GI Specials of best approved quality,c. 65mm dia GI Union |
| 243 | 619.2) Supplying and fixing of following dia butterfly valve a. 80mm dia butterfly valve |
| 244 | 619.2.1) Supplying and fixing of following dia GM Non return Valve a.80 mm GM Non return Valve |
| 245 | b. 40mm GM Non return Valve |
| 246 | 619.5)Supplying and fixing of following dia GM Wheel Valve (Heavy duty) a. 65mm GM Wheel valve with brass |
| 247 | 706.4.1) Supply and fixing of manually operated phase changer board |
| 248 | 707.2.1) Supplying of following PVC insulated and sheathed flat type copper L.T. cablea) 3 core 6 sqmm PVC insulated and sheathed flat type copper L.T. cable |
| 249 | b)3 core 4 sq.mm flat type copper cable |
| 250 | 725.2) Supply and fixing of MS cable box of suitable size on wall for the entry of 4 x 10 sqm /3.5c x 25 sqm with cable gland suitable for the above size with earth connection |
| 251 | 741.1.1) Supply and fixing of 20 Amps DP plug and( For AC Plug ) |
| 252 | 799.1) Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary a) Drilling of borewell in upto 60m |
| 253 | 799.1.2) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level. |
| 254 | 799.3) Charges for developing the borewell forthe entire depth with air compressor of 300 CFM capacity [Minimum 8 hours] |
| 255 | 799.3.1) Supplying and fixing of 160mm dia PVC end cap for borewell |
| 256 | 832.5.2)Supplying and fixing in position of UPVC window of casement type( open) for all sizes |
| 257 | 832.5.3)Supplying and fixing in position of UPVC Ventilator louvered ventilatortype for all sizes |
| 258 | 945.7) Providing 6 lever lock and 3 set key arrangement |
| 259 | Lift Arrangements958.4) Design Engineering Supply, Fabrication, Erection, Testing, commissioning and handling of 13 persons (884 kg) capacity(G+5 floor) |
| 260 | 958.5) Annual Maintance Charges for the lift i) 2 years |
| 261 | ii) 3 years |
| 262 | iii) 4 Years |
| 263 | iv) 5 years |
| 264 | 959.2) Erection, Testing and commissioning of 62.5KVA Diesel generator set. |
| 265 | 959.3) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets) |
| 266 | 959.4) Supply and installation of M.S. cable adopter box |
| 267 | 959.5) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia |
| 268 | 959.6) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia complete with MS wall / ceiling support, etc. |
| 269 | 959.7) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool |
| 270 | 959.8) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe |
| 271 | 959.9) Preparation of necessary drawingsfor approval CEIG |
| 272 | LETTERING & NUMBERING960.4.1) Supplying and fixing of Aluminium TNPHC Emblem of 30\" height with approved coloured powder coat in finishing matt |
| 273 | 960.4.3) Supplying and fixing of Aluminium TNPHC Emblem of 12\" height with approved coloured powder coat in finishing matt |
| 274 | 960.4.5) supply and fixing of 20\"x 5\" size plastic foam name plate with vinyl cutting letter |
| 275 | 960.4.6) supply and fixing of 24\"x 8\" size plastic foam name plate with vinyl cutting letter |
| 276 | 960.4.7) Supplying and fixing of 6\" height Aluminium letters with approved coloured powder coat in finishing matt |
| 277 | 960.4.8) Supplying and fixing of 5\" dia plastic foam plate of 3mm thick with 3\"height number |
| 278 | 960.4.9) Supplying and fixing of 8\" dia plastic foam plate of 3mm thick with 3\"height number |
AI Tender Summary
Tender Timeline
May 15, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 29, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender