|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum for footing works |
| 2 | Earth Work Excavation for Plinth Beam |
| 3 | Plain cement concrete 1:5:10 mix (One cement, five sand and ten aggregate ) using 40mm HBG metal from approved quarry,including cost and conveyance of all materials and labour charges ( excluding cost of centering charges ) for laying,finishing and curing etc, complete as per the standard specifications. |
| 4 | Centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directedfor Square Column Works |
| 5 | Septic Tank Slab |
| 6 | Centering for Plain Surface (Plinth Beam) |
| 7 | Centering for Drain Works |
| 8 | Centering for Culvert Slab |
| 9 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and halfsand &three course aggregate) using 20mm gauge hand broken granite stones for all RCCitemsof works excluding centering shuttering and cost of reinforcement including curing etc.,complete and alsoincluding fixingfan clamps and fixtures in RCCworkswherever necessary as directed by departmentalofficer etc., complete. |
| 10 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. |
| 11 | Brick work in CM 1:5 (one cement & five sand) using II class ground mouldeduct bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing,etc., complete complying with standard specification |
| 12 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 13 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications |
| 14 | Plastering with cement mortar 1:3, 20 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 15 | Painting 2 coats with approved Interior / Exterior Emulsion paint over cement plastered wall surface, ceiling andother new surface and including cleaning,preparing the surface and curing etc., complete. |
| 16 | Painting two coats in all floors over the new iron work with Ready Mixed Enamel Paint of approved quality and colour without priming coatincluding the cost all materials etc.,complete as per standard specification. |
| 17 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 18 | Supply and fixing of RCC precast slab 150mm thick in cementconcrete 1:2:4 mix (One cement two sand and four aggregate) using 20mm ISS metal including cost of moulding charges mixing, laying and curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification but excluding cost of reinforcement |
| 19 | Supplying and fixing in position S.S.Manhole covers (light or heavy duty) of various sizes of best approved quality and as per atandard specifications etc.,complete. |
| 20 | Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of83mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
