Bhakra Beas Management Board-BBMB has published Tender For Providing And Laying Sdbc 25Mm To 30Mm Thick On V6 Left Out V3 Stp Road And Front Of Scf Scr Etc In Sector 1 2 And 3 Of Bbmb Colony Talwara Township. Submission Date for this Tender is 25-05-2023. Road Work Tenders in talwara Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications [CSR item No. 24.16 (b)] |
| 2 | Providing and laying bituminous macadam 50mm to 75mm thick with continuous type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @3.4%,laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications CSR item No.24.18 (b) |
| 3 | Providing and laying semi dense bituminous concrete 25mm to 30mm thick with Continuous type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5%, laying with a Paver Finisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per IRC-111 (2009) specificationsspecifications ( CSR item No 24.21 (b) i ) |
| 4 | Road Marking with hot applied thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 0.25 kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications [CSR item No. 24.57] |
| 5 | Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications[CSR item No. 24.63] |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
