Goa Tourism Development Corporation Limited has published Tender For Development Of Tourism Infrastructure And Wayside Amenities From Ihm To Art Park. Submission Date for this Tender is 29-05-2023. Infrastructure Work Tenders in panaji Goa. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 3 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : b. All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 4 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in widthor 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50 m. b. All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 5 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 6 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. b. Moorum |
| 7 | Disposal of material/excavated earth upto a lead of 20kms by mechanical transport including laoding,unloading and stacking ( i ) Lime,moorum, building rubbish |
| 8 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 9 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level |
| 10 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a. All works upto plinth level |
| 11 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: b. In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level. |
| 12 | Centering and shuttering including struttings, propping etc. and removal of formwork for : b. vertical surfaces such as retaining walls , return walls, walls (any thk) including attached pilasters, buttresses, plinth and string courses, fillets, etc. |
| 13 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) a. All works upto plinth level |
| 14 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) b. In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 15 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) c. In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
| 16 | Centering and shuttering including strutting, proping etc. and removal of form for. i) Foundations, Footings, Bases for columns |
| 17 | Centering and shuttering including strutting, proping etc. and removal of form for. iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 18 | Centering and shuttering including strutting, proping etc. and removal of form for. xiii) Suspended floors, roofs landings, shelves & their supports |
| 19 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) )(Confirming to IS 1786 of 1986)for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floorsalongwith the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 20 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 21 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. a. 60 mm thick in all colours except grey (M35 grade) |
| 22 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. b. 60 mm thick in Grey colour (M35 grade) |
| 23 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm a. Jet Black |
| 24 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm b. Cherry Red |
| 25 | Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete a. Jet Black |
| 26 | Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete b. Cherry Red |
| 27 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 28 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 29 | Providing at store or site work non-pressure RCC pipes of with collarjoints conforming to IS:458-2003 revised as per amendment No.11 , includingfreight, carting, loading,unloading, stacking etc. complete. II) NP3 Class I) 600 |
| 30 | Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. i) 600 |
| 31 | Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. a. Size 30 cm L x 50 cm H x 15 cm T |
| 32 | Supplying and fixing ofPrecast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakagecomplete and as directed by Engineer -in -charge. b. Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity |
| 33 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803 |
| 34 | Providing and fixing weepholes with rigid PVCmake laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structurecomplete as directed by the Engineer in charge A) 110 mm dia |
| 35 | Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) . |
| 36 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density.as per MORTH Specification 404(Grade - II) By Manual Means |
| 37 | Providing and laying 50mm(consolidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in-Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m.including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m. bucket capacity to the specified levels, grade and cross fall using Type Aseal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause513. |
| 38 | Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects) i) for Grading I (40 mm nominal size ) |
| 39 | Providing and laying 30 mm thick Bituminous/Asphaltic concrete with 40-60 batch type HMP producing an average output of 50 tonnes per hour using crushed aggregates of specified grading Premixed with bituminous binder at 6.5 % by weight of total mix and filler incl. Providing anti-stripping agent.@ 0.50% of bitumen content of, transporting the hot mix to work site with all leads andapplying a tack coat @f 2 kg/10sq.m. with hot bitumen of 80/100 and laying with hydrostatic/hydraulic power finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled,vibratory or tandem rollers to achieve the desired compaction as per MoRT & H specifications clause 509 and 503 a) Antistripping agent @ 0.5% of bitumen content |
| 40 | Providing and applying primer coat with bitumen or bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per MoRT&H specifications clause 502. Bitumen 80/100 @ 1.00 kg/sq.m. |
| 41 | Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503. Bitumen 80/100@ 0.375 kg/sq.m |
| 42 | Designing, Casting Hand crafted moulded Bronze Sculpture of required proportions alloy of copper, tin etc of required height and proportional dimension as per approved sculpture by the Engineer-In-Charge. The approved sample to be first casted in Plaster of Paris/GRP/wood etc as appropriate, once approved in principle by the Engineer-In-Charge to be taken up for moulding. The alloy should be rust-proof and weather resistant and to be suitable for Goan climate. The scope includes all furnishings, polishing, fixing and other supporting structural materials, foundation base plate etc all complete, as directed by Engineer-In-Charge. |
| 43 | Supplying and fixing Pre-cast cement concrete kerb-stones of size 40cm L x 80cm H x 20cm T (factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site in Cement Mortar (1:4) including all leads lift etc complete as per manufacturers specification and as directed by Engineer-in-charge. |
| 44 | Supplying and fixing Pre-cast cement concrete Ballusters of size 100cmm in diameter & 600mm in Height (factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with nominal steel, 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators including fixing at site including all leads lift etc complete as per manufacturers specification and as directed by Engineer-in-charge. |
| 45 | Supplying, Installation, Testing and Commitioning of LED Kerb Stones (HSN:8530) of size 50cm L x 30cm H x 20cm T which includes 4 foundation nut and bolt per Kerb Stone (HSN: 7318), One Power supply (HSN: 850440), MCBs (HSN: 853620), Fiber Box with pole (HSN: 85359040), IP68 connectors (Factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) including all leads lift etc complete as per manufacturers specification and as directed by Engineer-in-charge. |
| 46 | Supply, Installation, Testing and Commissioning (DELUXE MODEL HEAVY DUTY) FOUR faced of up to 4 FEET GPS AUTO RESET CLOCK TOWER with MASTER, 24 HRS BATTERY BACKUP GPS TOWER CLOCK WITH DIGITAL CLOCK AND TEMPERATURE INDICATOR. The system comprises a master controller of the clock movement working on 220-240 volts AC power supply with 24 hours battery backup generating pulse in every minute to drive the clock hands. The work consists of fabricating and erecting Steel Structure as shown in the drawing 2 YEAR WARRANTY ON MECHANISM etc completeas directed by Engineer-in-charge. and as per manufacturers specification mentioned below |
| 47 | DETAILS & Specifications of Clock |
| 48 | The TAJ Four faced Analog Independent SS Pillar Clock Dimensions : Diameter (36"). Cabinet Material : 304 grade Stainless Steel Sheet Dial Face : 4 mm IMPORTED milky white acrylic sheet with Black acrylic sheets ( highly durable) will be pasted permanently on the dials. Your LOGO (if any) : Eco Solvent Print in multi colour (above no. VI) Controller : GPS Microprocessor based stepper motor controller with auto time setting Mechanisms : Stepper motor driven brass & steel geared Mechanisms Lighting : internal (back) lighting by means of LED lights Hands : Made of of solid aluminium with durable powder coating paints. Colour of letters & hands : Black All acrylic used will be imported sheets only. |
| 49 | DETAILS & Specifications of SS Pole (approx.) |
| 50 | Dimensions : Total Height (above ground level) : 22 feet Base Pole : 300mm in diameter x 4 mm thick . Base Plate : 15 inches in diameter x 15 mm thick Material : 304 Grade Stainless Steel Pipes Foundation (below ground level) : made of 2”x2” L angles upto 2 feet depth. This will be filled with concrete (will be supply to you by us) Provisions : The Mains supply provided by you( ELECTRICAL POWER) at the clock point. Brass bells... 150H.,125H &100H..Each 12 nos. |
| 51 | Providing, Fabrication and fixing of Polycarbonat Sheet (Transparent/Milky) cladding with 1.2 mm thick Polycarbonate sheets. Silicon sealants etc. including accessories etc complete as per manufacturers specification and as directed by Engineer-in-charge. |
| 52 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 53 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 meters lead. |
| 54 | Dismantling and stacking with in 50 meters lead fencing posts or struts including all earth work and dismantling of concrete etc. in the base of: b. R.C.C. |
| 55 | ELECTRICAL WORKS |
| 56 | Supply of4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 core 10sq.mm |
| 57 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 58 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specsd) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement. (a) In soily strata |
| 59 | Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing . as required |
| 60 | Supply of3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm |
| 61 | Supply, installation, testing and commissioning of 15W Spike Light , ultra compact, IP 66 LED luminisare, corrosion proof, die cast aluminium construction.Make Legero, panasonic, Bajaj, Wipro, La luminare etc. |
| 62 | SITC of Saber T8 retrofit light with 18 Watt LED Lamp. Legero, panasonic, Bajaj, Wipro, La luminare etc. |
| 63 | SITC of Flexible Led strips made of bright Led chips, high quality thermal PCB board with IP65 product, withincluding driver with suitable watt Lamp. Legero, panasonic, Bajaj, Wipro, La luminare etc. 6 watts / metre |
| 64 | SITC of Pole Junction box suitable for 10 sq.mm cables with IP 66 , Lighning MCB 10A , SP B curve, material polycarbonate with cable box walls without knockouts , wheather proof, resistant. Makehensel |
| 65 | Street Light Panel: Supply, Installation, testing and commissioning of LT panel IP- 67 outdoor type,floor mounted Panel, shall be suitable for 415 V, 3 phase, 4 wire, 50Hz Supply system. With 3 phase energy meter and 63A TPN MCB as incommer and 11 nos of 16 A TPN MCB as outgoing with 3 numbers ofmicrocontoller based 25 A programmable digital Almac timer. As shown in SLD. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
