Indian Oil Corporation Limited-IOCL has published Tender For Carrying Out Interior Civil Viz. Aluminum Partition, Painting And Other Finishing Works At Serpl, Cgd Kurnool Office. Submission Date for this Tender is 16-06-2023. Civil Work Tenders in kurnool Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-May-2023 | Extension of bidsubmission period | Date | 07-06-2023 |
| 2 | 09-Jun-2023 | Extension of bid submission period | Date | 16-06-2023 |
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminium work for doors,partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing , stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-in-Charge. |
| 2 | For fixed Portion: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) |
| 3 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming toIS:12823 Grade-l Type-ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. Brass/ Stainless Steelscrews etc. complete as per architectural drawings and directions of the Engineer-in-Charge : Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] :With float glass panes of 4.00 mm thickness |
| 5 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. [Note: Aluminum hinges shall not be used in wooden |
| 6 | 125x75x4 mm |
| 7 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564 embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 8 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etc. complete : |
| 9 | Twin rubber stopper |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 11 | 200x10 mm |
| 12 | Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. GARWARE or approved equivalent make, design and shade, all complete as per manufacturer"s specification and as per directions of the Engineer-in-Charge. |
| 13 | Over Glass partition & door |
| 14 | Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 15 | Providing and fixing aluminium round shape handle of outer diameter 100 mm with SS screws etc. complete as per directions of the Engineer-in-Charge : |
| 16 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 18 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content complete in all respect with all cost ,labour, T & P etc as per direction of the Engineer - in - charge. |
| 20 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 21 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour complete in all respect with all cost ,labour, T & P etc as per direction of the Engineer - in - charge. |
| 22 | Two Coats |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
