}

Tender For Supply And Installation Of Escalator In Redevelopment Of Old Bus Stand Project Under Smart City Mission (7M Height Up And Down ) With Allied Civil Works, salem-Tamil Nadu

Municipal Adminitration And Water Supply Department-MAAWSD has published Tender For Supply And Installation Of Escalator In Redevelopment Of Old Bus Stand Project Under Smart City Mission (7M Height Up And Down ) With Allied Civil Works. Submission Date for this Tender is 22-05-2023. Passenger Lift Tenders in salem Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

37658784
Tender For Supply And Installation Of Escalator In Redevelopment Of Old Bus Stand Project Under Smart City Mission (7M Height Up And Down ) With Allied Civil Works
Open Tender
Indian
Tamil Nadu
salem
22-05-2023

Tender Details

Supply And Installation Of Escalator In Redevelopment Of Old Bus Stand Project Under Smart City Mission (7M Height Up And Down ) With Allied Civil Works

Key Value

Document Fees
Refer document
EMD
INR 230000.0 /-
Tender Value
INR 2.30 Crore /-

BOQ Items

Name of Work:SupplyErection , Testing and Commissioning of 7m height (up and down) HEAVY DUTY ESCALATOR with allieed civil works in SALEM OLD BUS STAND under smart city mission, Salem City Municipal Corporation, SALEM-636001.
Sl. No. Item Description
1Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
2Earthwork excavation for foundation in Soft Disintegrated Rock Laterite, Soft Rock or Kankar notrequiring blasting etc., and sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil except in hard rock requiring blasting inclusive of shoring, shuttering and bailing out water wherever necessary, refilling etc., complete complying with standard specification.
3Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
4Supplying, fabricating and placing in position of Steel Reinforcement usingMild Steel or Ribbed Tor Steel bars for reinforcement to all RCC works as per design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification.
5Supplying and erecting centering including necessary supports for the plane surfaces such asRCC Column Footing, Plinth Beam, & Sill Beam etc., using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding supported by casurina props of 10cm to 13cm dia spaced at suitable intervals etc., complete complying with standard specification.
6Providing and laying in position standardisedconcrete mix M-30 Grade in accordance withIS 456-2000 using 20mm and down graded hard broken jelly for all RCC items of works with minimum cement content of 400kg/cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (4.79cum) 7670kg of sand, butexcluding cost of reinforcement grill and fabricating charges cantering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in the RCC floor / Roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and directed by the departmental officers - The Coarse and fine aggregates to be used should comply with the requirements of IS standards.
7Supplying and erecting centeringincluding necessary supports for the plane surfaces such as Drainage, Culvert & Sump Retaining walls etc., using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding supported by casurina props of 10cm to 13cm dia spaced at suitable intervals etc., complete complying with standard specification.
8Providing and laying in position standardisedconcrete mix M-30 Grade in accordance withIS 456-2000 using 20mm and down graded hard broken jelly for all RCC items of works with minimum cement content of 400kg/cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (4.79cum) 7670kg of sand, butexcluding cost of reinforcement grill and fabricating charges cantering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in the RCC floor / Roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and directed by the departmental officers - The Coarse and fine aggregates to be used should comply with the requirements of IS standards.
9Fly Ash Brick work In CM 1:5 mix using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing,curing etc., complete complying with standard specification.
10Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc. complete complying with standard specification.
11Gi sheet
12Supplying and fixing MS angles & flats of required size etc.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail