|
| 1 | M & L for Complete removal of existing treatment from walls etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7/9 inch to make the surfaces free from dust, loose paints etc by skilled labour complete all as specified and directed. |
| 2 | M & L for applying water proof cement based putty @ 1Kg (undiluted)/Sqm of average thickness 1mm over the plastered/old painted wall after scrapping to prepare the surfaces even and smooth and sanding the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surfaces free from dus etc by skilled labour as per the following steps complete all as specified and directed:(a) Step 1: Mix the putty powder by adding water as per the manufacturer\"s instructions and mix it with putty mixer of mixing capacity of min 2.5 Kg putty per minute.(b) Step 2: Apply the first coat of prepared mixer with the help of fully automatic airless spray machine of putty application having glow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI(c) Step 3: Allow 6-8 hrs time to dry the putty surfaces |
| 3 | M & L for applying one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/ 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces for painting of susequent coat complete all as specified and directed. |
| 4 | M & L for applying two coats of oil bound distemper by using fully automatic Airless spray tenchnology machine with max pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying distemper in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.(Note: Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 5 | M & L for preparing old decorated surfaces of wall including cornices, pilasters etc, including bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of oil bound/acrylic distemper by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying distemper in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.(Note: Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 6 | M & L for preparing old decorated surfaces of walls including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 7 | M & L for preparing old decorated surfaces of ceiling including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 8 | M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M & L for Preparation of oldpainted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed |
| 11 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and fair without using extra cement complete all as specified and directed. |
| 12 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 13 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4,mixed with integral water proofing compoundwith weight of cement in top layer as per manufacturer\"s instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 14 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 15 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 16 | M & L for applying one coat of acrylic water based exterior grade primer @ 0.9 Ltr (undiluted)/10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having presure of 3300 PSI and allow 6-8 hrs to dry the surfaces for painting of subsequent coats complete all as specified and directed. |
| 17 | M & L for applying Two coats of of water based 100% Premium acrylic smooth exterior emulsion paint with silicon aditive and colour stay technology, excellent Dirt Pick up resistance with low VOC less than 50 gm/litre as per the LEEDS specifications and UV resistance as per IS 15489:2004, Alkali & fungal resistance of required shade (Company Depot Tinted) @ 1.79 Ltr (undiluted)/10 Sqm for two coats diluted with water as per manufacturer instructions with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having presure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint complete all as specified and directed. |
| 18 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 19 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame)complete all as specified and directed. |
| 20 | Taking down shutters of any descriptionn. exc 1 Sqm each complete all as specified and directed. |
| 21 | Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed. |
| 22 | Taking down shutters of any description exc 2 Sqm each complete all as specified and directed. |
| 23 | S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 24 | M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etcincluding necessary form work complete all as specified and directed. |
| 25 | S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drillingbolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed. |
| 26 | S & F 30 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 27 | S & F 30 mm thick, factory made, Second class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, etc.; sizes of members of shutters as specified in SSR Part I complete all as specified and directed |
| 28 | S & F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 29 | S & F 30 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified. |
| 30 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 31 | S & FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed. |
| 32 | S & FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. |
| 33 | S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 34 | S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 35 | S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 36 | S & F 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 37 | S & F 100 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 38 | S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 39 | S & F 125 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 40 | S & F 125 mm, Gate and shutter, hooks and eyes, Aluminium plate type II complete all as specified and directed. |
| 41 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 42 | M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 43 | Taking down aluminium shutter and frame, exe 1.5 but n.exc. 4 Sqm in each complete all as specified and directed. |
| 44 | Taking down aluminium shutter and frame, n.exe 1.5 in each complete all as specified and directed. |
| 45 | S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i)Thickness of aluminium section shall not be less than 1.5 mm). |
| 46 | S & F Powder coated (minimum 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed. |
| 47 | Providing and fixing in repairs Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed. |
| 48 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 1 Sqm but n. exc 2 Sqm each including refixing builder\"s hardware as required and replacement of screws etc complete all as specified and directed. |
| 49 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description n.exc 1 Sqm each including refixing builder\"s hardware as required and replacement of screws etc complete all as specified and directed. |
| 50 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 2.0 Sqm each including refixing builder\"s hardware as required and replacement of screws etc complete all as specified and directed. |
| 51 | S & F in repairStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. |
| 52 | S & F in repair 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 53 | S & F in repairs 100 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 54 | S & F in repairs 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 55 | S & F in repairs 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 56 | S & F in repair 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 57 | S & F in repairs 125 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 58 | S & F in repairs 125 mm, Gate and shutter, hooks and eyes, Aluminium plate type II complete all as specified and directed. |
| 59 | S & F in repairs, 300 mm long,mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed. |
| 60 | S & F in repair Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 61 | Taking down existing locking system contains any numbers of levers, replacing the stucked/ damaged levers and applying oil/grease to all part and making full functional properly and re-fixed in position complete all as specified and directed. |
| 62 | S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed. |
| 63 | S & F in repairs 100 mm, 6 lever, Brass, Mortice Lock, vertical type with two keys complete all as specified and directed. |
| 64 | S & F in repairs, 75mm size, night latch with two levers, brass body, polished bright; vertical type with brass knob or lever handle and fixedcomplete all as specified and directed. |
| 65 | S & F in repairs 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed. |
| 66 | S & F in repairs, Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 67 | S & F in repair fancy type brass magic eye for doors complete all as specified and directed. |
| 68 | S & F in repairs, acrylic PVC bathroom cabinet of size 350 x 450x100 mm with openable shutter fixed with looking mirror of selected quality and with suitable shelves in side the cabinet of superior quality as approved. (Make: Prayag Cat No. 551 or equivelant of make as per manufacturer\"s list) |
| 69 | S & F in repair 20 mm dia, Aluminium anodised, curtain rod with bracket complete all as specified and directed. |
| 70 | S & F in repairs 25 mm dia, stainless steel, fancy curtain rod, heavy duty, 2 to 3mm thickincluding stainless steel bracket of superior quality for each opening/door/window etc complete all as specified and directed. |
| 71 | S & F in repair Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 72 | S & F in repair40mm dia, cupboard knobs fixed with nut,screw and washer of brass, polishedfixed with screwscomplete all as specified and directed. |
| 73 | Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed. |
| 74 | S & F 18/19 mm thick, Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutter of cup-board shelf, etc complete all as specified and as directed. |
| 75 | S & F 18/19 mm thick, plywood, grade BWR, type BB, fixed with screwsto timber frame work in partition/ cup baord/ wall panelling, etc complete all as specified and directed. |
| 76 | S & F 0.90 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 77 | S & F in repairs stainless steel basket of size 475mmx500mmx100mm with external width 475mm as in cutlery, cup and saucer basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer\"s instructions.) |
| 78 | S & F in repairs stainless steel basket of size 475mmx500mmx200mm with external width 475mm as in thali, plain wire basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer\"s instructions.) |
| 79 | S & F in repairs stainless steel sliding/telescopic channel of length 20 inch (500mm) with 3 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45mm including necessary fixing arrangement complete all as specified and directed. |
| 80 | S & F in repairs cold rolled nickel plated steel O crank soft closing concealed hinge (15-22mm) including necessary fixing arrangement to shutter complete all as specified and directed. |
| 81 | S & F in repairs stainless steel ventilator of size 100mmx100mm for cupboard shutter including necessary fixing arrangement to shutter complete all as specified and directed. |
| 82 | S & F in repairs stainless steel modular kitchen handle, 100mm long complete all as specified and directed. |
| 83 | S & F in repairs 6 mm thick, forexternal teak wood lipping to Plywood/particle board etc 18/19mm thick, fixed with nails complete all as specified and directed. |
| 84 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 85 | Hacking out old broken glass (any thickness, size, quality or description)from metal frame including punching or drilling out old glazing pins/springclipsandprovidingand fixing new onescomplete all as specified and directed. |
| 86 | S & F 4 mm thick, sheet glass, ordinary quality and glazing to aluminium window not exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of glazing beads included with the respective items of shutter) |
| 87 | S & F 4 mm thick, sheet glass, ordinary quality and glazing to aluminium window exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of glazing beads included with the respective items of shutter) |
| 88 | S & F 4.8 mm thick, sheet glass,ordinary quality and glazing with rubber gasket etcin square exceeding 0.5 Sqm in each pane complete all as specified and as directed.(Note: The cost of rubber beads included with the unit quoted rate of respective aluminium shutter) |
| 89 | S & F 4.8 mm thick, sheet glass,ordinary quality and glazing with rubber gasket etcin square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.(Note: The cost of rubber beads included with the unit quoted rate of respective aluminium shutter) |
| 90 | S & F 4 mm thick, sheet glass,ordinary quality and glazing with wooden beadsin square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 91 | S & F 4 mm thick, sheet glass,ordinary quality and glazing with wooden beadsin square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 92 | Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement ofrubber beading, aluminium beads, cleats ofas required size and refixingin same position complete all as specifiedand directed. |
| 93 | S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 94 | S & F in repairs, Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe)including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. |
| 95 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain andflushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 96 | S & F in repairs Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook, 15mm bore complete all as specified and directed. (Make: Jaquar Cat No. ALD-565 or equivelant of make as per List of manufacturer\"s) |
| 97 | S & F in repairstainless steel Grating, 110mm dia fixed with white cement complete all as specified and as directed. |
| 98 | S & F in repairstainless steel Grating, 75mm dia fixed with white cement complete all as specified and as directed. |
| 99 | S & Fin repairs, Brass CP mixer with 3-in-1 system for mixing hot & cold water screwed down for iron pipe, 15mm bore and fixed complete all as specified and directed |
| 100 | S & F in repairs 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 101 | S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 102 | S & F in repairs, 15mm bore, PVC connection pipe 750mm long with PTMT nuts at both ends complete all as specified and directed. |
| 103 | S & F in repair 15 mm bore,Connection pipe, Chromium plated, 600 mm long with hexagonal nut & washers fitted at both ends complete all as specified and directed. |
| 104 | S & F in repairs 40 mm dia, High density poly-ethylene pipes, (LDPE) of pressure rating 6 kgf/cm 2 laid as in waste pipe of WHB etccomplete all as specified and directed. |
| 105 | S & F in repairs,plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottomand mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 106 | S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white,with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 107 | S & F in repairs PVC syphonic kit (any type/any pattern) suitable for 10 litre capacity low level flushing cistern and making the cistern functional in all respectcomplete all as specified and directed. |
| 108 | S & F in repairs float handle as per the existing specifications suitable for 10 litre capacity low level flushing cistern and making the cistern functional in all respect complete all as specified and directed. |
| 109 | S & F in repairs, stainless steel kitchen sinks with drainage board made of1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specifiedand directed. |
| 110 | S & F in repairs, stainless steel sinks made of1 mm thick sheetwith plugs, washers and wastes including bedding in ement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 111 | S & F in repairs, Stainless steel, kitchen plate rack of size 24x30x10 inch as per existing design and specification as approved complete all as specified and directed. (Make: Prayag Cat No. P-330 or equivelant of make as per list of manufacturer\"s) |
| 112 | S & F in repairs brass spindle (heavy) suitable for bib taps/stop valve of 15mm bore all as per the existing specifications complete all as specified and directed. |
| 113 | S & F in repairs brass spindle (heavy) suitable for concealed stop cock of 15mm bore, any type all as per the existing specifications complete all as specified and directed. |
| 114 | Cleaning and removing all scale and dirt, etc, from tanks of capapcity n.exc 250 Ltrs and from mouths of circulating pipes, etc. using bleaching powder and washed with water including dismantling and reconnecting and refixing in psoition including writing date of cleaning with nwhite synthetic enamel paint as \"CLEANDED ON\" complete all as specified and directed. |
| 115 | S & F 225 litres capacity, rotational moulded polyethylene loft water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one complete all as specified in SSR Part I and as directed. |
| 116 | S & F in repair 15 mm bore,Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 142 gms) complete all as specified and directed. |
| 117 | S & F in repairs, 15 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 118 | S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 119 | Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. |
| 120 | Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. |
| 121 | Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 119 above) |
| 122 | Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 120above) |
| 123 | Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 124 | Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 125 | S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, chromium plated with long shank and cup, concealed type, screwed downhigh pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 126 | S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 127 | S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered \"Hot or Cold\" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 128 | S & Fin repairs, Brass CP mixer for sink/basin, long swan neck, two way, high presssure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed down for iron pipe, 15mm bore and fixed complete all as specified and directed |
| 129 | S & F inrepair 125 mm size, shower rose, brass chromium plated, swival type, complete all as specified and directed. |
| 130 | S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 131 | S & F in repairs,Vitreous China wash basin, Counter Top Basin, of Size: 565 x 415 x 190mm excluding taps fixed on granite slab complete all as specified and directed.(Make : Jaquar Cat No. FLS-WHT-5601 or equivalent of make as per List of manufacturer\"s) |
| 132 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal ofdebris and rubbish to outside MD land complete all as specified and directed. |
| 133 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 134 | M & L for Glazed, ceramic, colouredtiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 135 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 136 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 137 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 138 | M & L for Vitrified, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 139 | M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed. |
| 140 | Cleaning of blocked gully traps and waste pipes of any dia upto first manhole by removijng the deposited sludge or any blockage and flushing out with watercomplete all as specified and directed. |
| 141 | S & F in repair corner glass shelf assembly, 300mm with ABS bracket,300x600mm complete all as specified and directed.(Make: Prayag Cat No. BEA-46 or equivelant of approved make) |
| 142 | S & F in repairs, Toilet Roll Holder, brass, chromium plated fixed to wall with brass screw complete all as specified and directed. (Make: Jaquar Cat No. AKP-35751P or equivelant of make as per List of manufacturer\"s) |
| 143 | S & F in repairs, Towel Rack 600mm long with Lower Hangers including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. ACN-1181S or equivelant of make as per list of manufacturer\"s) |
| 144 | S & F in repairs, Towel Ring Round with Round Flange including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. ACN-1121BN or equivelant of make as per list of manufacturer\"s) |
| 145 | S & F in repair FRP sheet 2mm thick as covering to grills or as view cutter, fixed with self tapping screwscomplete all as specified and directed as per specification and directed |
| 146 | M & L for grinding of Marble/ Cuddapah/ kota/ Mosaic/ Shahabad floor/ dado etc with suitable grit size Carborandum stones, and removing black spots and other faded surfaces on existing terrazzo floor with mechanical, hand grinding, grouting with suitable neat cement grit of same colour cement of the original floor, washing the surfaces clean and rubbing hard with slightly mustered felt with oxalic acid and tin oxide polishing and polishing the floor with felt or hassian base cloth and making the floor bright with polish complete all as specified |
| 147 | M & L for Preparation of old treated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and making smooth surfaces with sand paper and cleaning and filling with wood filler and applying two coats of synthetic varnish over a coat of wood filler liquid transperant complete all as specified and directed. |
| 148 | S & F in repairs 50 mm bore, Unplasticized PVC pipes of pressure rating 10 kgf/sq. cm fixed to walls, laid in floor etc completeall as specified and directed. |
| 149 | S & F In repairs, aluminium bottom strips for entrance doors, Minimum 0.5mm thick, 20 to 25mm wideto arrest entry of insects including fabric dust remover fixed at the bottom of the stripcomplete all as specified and as directed. |
