Military Engineer Services-MES has published Tender For Certain Repair To Flooring, Joineries, Plumbing And Other Misc Repairs At 31 Sqn Complex (Old And New) And Fms Area At Af Stn Jodhpur. Submission Date for this Tender is 24-06-2023. Civil Work Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Jun-2023 | date extend | Date | 17-06-2023 |
| 2 | 06-Jun-2023 | Amendment | BOQ | 17-06-2023 |
| 3 | 09-Jun-2023 | Amendment | Other | 17-06-2023 |
| 4 | 17-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-06-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and as directed. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 3 | Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed by Engr-in- Charge |
| 4 | Dismantling of Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers & cover fillets/frame work |
| 5 | Taking down cement plaster on block masonaryor concrete/stone masonrysurfaces of any description including raking out joints,hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 6 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqmeachcomplete all as specified and as directed. |
| 7 | Taking down chowkats or frames with shutter (without taking off shutters from the frame)exceeding 1.5 Sqm not exc.4 sqm eachcomplete all as specified and as directed. |
| 8 | Dismantling of Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers & cover fillets/frame work |
| 9 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 10 | M&L for 15 mm thick rendering in cement mortar 1:6 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed. |
| 11 | M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed. |
| 12 | M&L for 5 mm thick rendering in cement mortar 1:3on fair faces of brick work or concrete surfaces as in ceiling complete all as specifed and as directed. |
| 13 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 14 | M&L for preparation of new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed.. |
| 15 | M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over a coat ofalkali resistant primer complete all as specified and as directed.. |
| 16 | S&F in repairs CP Bib taps long body with flange fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule (Make : Prayag Cat part No.PIS-08 H or equivalent) complete all as specified and directed |
| 17 | S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks & fly-nuts, screwed for iron pipe. (Make Prayag Cat part No. 8702-N or equivalent) complete all as specified and directed. |
| 18 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets.(Make prayag or equivalent) |
| 19 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern),S Trap with soft close seat cover including twin flush fittings white(Make Prayag Picasso orcomplete all as specified and as directed. (Make Prayag Cat Part No. 4645 or equivalent) |
| 20 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed (Make Prayag or equivalent) |
| 21 | S & F in repairs kitchen plate rack with four shelves made out of stainless steel sheet 1mm thick over all size 90x60x25cm complete all as specified and directed |
| 22 | S&F in repairs designer PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets (Make Prayag Cat part No. 505 or equivalent) complete all as specified and directed |
| 23 | S&F in repairs600mm x 450mmmirror of selected quality glass 6 mm thick including PVC framecomplete all as specified and directed by Engineer –in-Charge. |
| 24 | S&F in repairs 1200 mm x 450mmmirror of selected quality glass 6 mm thick including designer wooden frameincluding provision of stand, screw for fixing complete all as specified and directed by Engineer –in-Charge. |
| 25 | S&F in repair Stop valves/angle valve with flange 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions (Make Prayag cat part No. 8710-N or equivalent) complete all as specified and directed |
| 26 | S&F in repair 2 way angle cock 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions (Make Prayag cat part No. 9311-N or equivalent) complete all as specified and directed |
| 27 | S&F in repair 2 way Bib cock 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions (Make Prayag cat part No. 9312-N or equivalent) complete all as specified and directed |
| 28 | S & F in repair for 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 29 | S & F in repair for 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] . |
| 30 | S & F PVC connection 15 mm size with PTMT nuts of length 450 mm, including taking down old PVC connection all as specified and as directed. |
| 31 | S&F in repair for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in Charge |
| 32 | Supply and fix in repair Vitreous china urinal half stall type white, completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement,with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections, fixed complete all as specified and as directed (Make Prayag Cat part No. 4998 or equivalent) |
| 33 | S&F in repair for Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line, complete all as specified and directed |
| 34 | S&F in repair for brass chromium plated urinal spreader fancy type of approved quality fixing with 15 mm dia pipe complete all as specified and directed. |
| 35 | S&Fin repair for three-in-one brass CP mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe or any type of pipe and fixed in position and making good disturbed portion complete all as specified and directed. (Make Prayag or equivalent) |
| 36 | S&F in repair for PVC water closet soft close seat cover, white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device, all as specified and as directed (Make Prayag Cat Part No. M-Gold 723 or equivalent) |
| 37 | S&Fin repair for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter lomg flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified and directed by Engr-in-Charge (Make Prayag Cat part No. BEA 106 A or equivalent) |
| 38 | S&F in repair CP grating of size 100 mm dia complete all as specified |
| 39 | S&F in repair CP grating of size 100 mm dia with waste hole complete all as specified |
| 40 | S&F in repair for Brass chromium plated shower rose 125mm size with or without swivel joints, any size,with arm including fixing to steel pipe or union complete all as specified and directed. (Mafe Prayag Cat Part No. BS-76 or equivalent) |
| 41 | Supply and fix in repair for towel Ring, brass chromium plated. complete all as specified and as directed (Make Prayag Cat Part No. BA-11 or equivalent complete all as specified and directed |
| 42 | M & L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 43 | M & L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 44 | S&F in repair for toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.(Make Prayag Cat part No. BA-08 or equivalent) |
| 45 | M&L in repairs 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and as directed. |
| 46 | S & F for polyethylene water tank cover with hinges suitable up to 1000 Ltrs tanks, including taking down old water tank cover all as specified and as directed. |
| 47 | S&F in repairs glass shelf 300 mm (with brass brackets) complete all as specifed and directed |
| 48 | S&F in repair for 15mm dia CP jet with CP flexible pipe 90cm long incl necessary fittings complete all as specified and directed . |
| 49 | S&F in repair for PVC bathroom mirror cabinet 600 mm x 400 mmIst quality fixed with necessary screws complete all as specified and directed (Make Prayag Cat Part No. 555 or equivalent) |
| 50 | S&F in repair forbrass chromium plated Soap Dish Ist quality complete including fitting all as specified and directed (Make Prayag Cat Part No. BA-05 or equivalent) |
| 51 | Supply and fix in repair for towel Rail 45 cm long brass chromium plated. complete all as specified and as directed (Make Prayag Cat Part No. GB-04 or equivalent complete all as specified and directed |
| 52 | S&F in repair for stainless steel soap dispenser complete all as specified and directed (Make Prayag Cat Part No. BEA-20 or equivalent complete all as specified and directed) |
| 53 | S& F in repair for peg set of 04 Nos pegs of solid body size 125 mm to 175 mm fixed in wooden designer base frame complete all as specified and directed |
| 54 | S&F for rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule including taking down old one all as specified and as directed.complete all as specifed and directed. |
| 55 | All as per item above but 1000 Ltrs capacity. |
| 56 | S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including taking down old pipes all as specified and as directed. |
| 57 | All as per itemabove but 110 mm dia . |
| 58 | S & F for 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed. |
| 59 | S & F PVC (SWR)bends any radius 75 mm dia, , in repairs all as specified and as directed |
| 60 | S & F PVC (SWR) bends any radius 110 mm dia of bore, including taking down old bends all as specified and as directed. |
| 61 | S&F Aluminium Anodizedaluminium frame for doors, windows, ventilators, partition wall with one or more rebates including handle, tower bolt, hinges etc including taking down old doors/windows/partition complete all as specified and as directed by Engr-in-Charge. |
| 62 | Add for Powder Coating to Aluminium Anodizedaluminium frame for doors, windows, ventilators, partition wall(minimum thickness of powder coating 50 micron) complete all as specified and directed |
| 63 | S& F for 9 mm thick Prelaminated particle board, exterior grade prelaminatedwith both side decorative choice lamination complete all as specified and directed by Engr-in-Charge |
| 64 | S&F in repair for 18/19 mm thick PVC moulded solid board, decorative for cabinet boxes,shutters etc. with shelf and shutters full size fitted including coloured topping on all exposed edges under /above kitchen cooking platform and other platformcomplete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings. |
| 65 | S&F in repair Hasp and staple, safety type, stainless steel including bolt to hinge plate and fixed with screws all as specified and directed. |
| 66 | S & F in repair Continuous (piano) hinges width of flap 30 mm mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 67 | S & F in stainless steelhandles 75 mm long complete all as specified and as directed by Engr-in-Charge . |
| 68 | S & F for 5.5 mm thick sheet glass ordinary quality in square exc 0.50 Sqm each fix in aluminium frame with rubber beadingcomplete all as specified and as directed by Engr-in-Charge . |
| 69 | Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed |
| 70 | S & F for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm each in each paneall as specified and as directed |
| 71 | S&F in repair for designer with grooves anodised aluminium snap grid frame work for false ceiling ceiling fixed with screw suspended with 6mm dia GI(upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and as directed by Engr-in-Charge |
| 72 | M&L for 12 mm thick perforated particle board/tiles for insulation and accoustic purpose 60x60 cm in size fixed with staples on snap grid incl preparation of surface and applying two coats of oil bound distemper on new or previously untreated surfaces of ceiling in patch work complete all as specified and directed by Engr-in-Charge |
| 73 | S&F for 6 mm thick PVC ceiling board fixed in flat surfaces on snap grid frame work including complete all as specified and directed |
| 74 | S & F in repair 150 mm floor door stopper of aluminium alloy powder coated, with hard drawn steel spring all as specified and as directed. |
| 75 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified |
| 76 | S&F in repairs cast iron body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg.complete all as specified |
| 77 | S&F for butt hinges medium weight stainless steel of size 75 mm complete all as specified and directed. |
| 78 | S&F in for hinges medium weight stainless steel of size 100 mm complete all as specified and directed. |
| 79 | S&F for Aluminium anodised barrel tower bolt, of extuded section and fixed of 150 mm long complete all as specified and directed. |
| 80 | S&F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 81 | S&Ffor extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed |
| 82 | S & F in repair for stainless steel barrel tower bolts of 200 mm long complete all as specified and as directed by Engr-in-Charge . |
| 83 | S & F in repairs stainless steelhandles 150mm long complete all as specified and as directed by Engr-in-Charge . |
| 84 | S & F in repairs stainless steel sliding door bolt with hasp, staple bolt type and fixing clips of sheet of 300 mm long complete all as specified and as directed by Engr-in-Charge. |
| 85 | S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty including taking down old one all as specified and as directed. |
| 86 | Supply and fix in repair for drapery/curtain rod in any length, of 20 mm dia stainless steel with 1 mm thick wall thickness including SS wall bracket complete all as specified and as directed by Engr-in-Charge . |
| 87 | S&F in repair for stainless steel peg set of 06 hook complete all as specified and directed |
| 88 | S& F for Solid PVC Wall Lining consisting of 5mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed |
| 89 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed |
| 90 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking down of old railing complete all as specified and directed |
| 91 | S&F for 10 mm thickToughned glass as in doors, partitionsand similar work including cutting to shape, drilling holes required including all stainless steel (Grade 304) patch fittings including handles,brackets etc complete all as specified and directed |
| 92 | M & L 75 mm thick plain cement concrete 1 : 3 : 6 type C2 (using 40 mm graded stone aggregate) as in plinth protectionlaid in pannels including necessary form work,finishedeven and smooth without using extra cement |
| 93 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors complete all as specified and as directed by the Engr-in - Charge. |
| 94 | S&F coloured Non Skid ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed |
| 95 | M&L for Vitrified light shade coloured tiles9-10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 1.00 sqmin floors etc.Set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including over screed bed or bedding layer ofmortar15 mm thick laying floor finished in cement mortor 1:6 complete all as specifed and directed. |
| 96 | M&L for Vitrified light shade coloured tiles9-10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 1.00 sqm in skirtingetc.Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed. |
| 97 | M&L forglazed ceramic coloured tiles of size 350 x 250 x 7mm /450 x 300 x 7mm/300x600x 7 mm thick over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed. |
| 98 | M & L for renewing tiles in patches area n.exc 5.00 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new ceramic tiles to match the existing floor complete all as specified and as directed. |
| 99 | M&L Granite of 20mm thick, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including screed layer of 15 mm thick in CM 1:4 all as specified and as directed. |
| 100 | S&F in repair for Venetian blinds, vertical/horizontal type, 100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and as directed. |
| 101 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grained PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed |
| 102 | M & Lfor IInd class hard- wood plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at jointscomplete all as specified and directed |
| 103 | S&F for Factory made solid panel PVC door shutter, 30 mm thick (Style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing all as specified andas directed. |
| 104 | M & L for 30 mm thick flush shutter solid core construction with block board core and both face covered with decorative face veneerlipping with frame to match complete all as specified and directed. |
| 105 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including dismanting complete all as specified and as directed by Engr-in-Charge. |
| 106 | M&L for Anti Termite Treatment by providing and injecting along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified & directed by the Engr-in-Charge |
| 107 | M&L for Anti Termite Treatment of soil under existing floor using emulsion @ one litreper hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed by Engr-in-Charge |
| 108 | M&L for Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed |
| 109 | Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified including demolition and as directed by the Engr-in - Charge. |
| 110 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 111 | S&F for at or near ground level factory made cement concrete kerb stonein position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 112 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed |
| 113 | M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregatesas in sub base complete all as specified and as directed. |
| 114 | M & L for Factory made Vitrified heavy Duty parking tiles coloured, matt finish,unglazed and unpolishedof size 300x300x10mm thick including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed by Engr-in-Charge. |
| 115 | M&L for preparation of new concrete surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified and as directed. |
| 116 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
| 117 | M&L for preparation of old decorated unplastered surfaces of ceiling, including brooming or steel wire brushing, scrapping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks by applying white cement base putty in patches as required and applying two coat of whitewash to wall incl cleaning of windows, door internal fitting & any other surfaces by removing splashes/ spot after finishing the job complete all as specified and directed |
| 118 | M&L for preparation of old decorated unplastered surfaces of wall, including brooming or steel wire brushing, scrapping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks by applying white cement base putty in patches as required and applying two coat of oil bound distemper to wall incl cleaning of windows, door internal fitting & any other surfaces by removing splashes/ spot after finishing the job complete all as specified and directed |
| 119 | M&L for removal of old existing treatment from surface of walls, rub the wall surfaces with wire brush or grinder and finally with fine sand paper and applying two coat of exterior weather proof water base emulsion (white or tinted on walls including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes/spots after finishing the job complete all as specified and as directed by the Enginner-in-Charge.Note:-The quoted rate shall be deemed to be included for work in building/structure of any height |
| 120 | M&L for preparation of preparation of old steel surfaces any description, exceeding 10 cm width or girth and two coat of synthetic emnamel paint (white or tinted) including cleaning of windows, doors internal fittings & any other surfaces by removing splashes/ spots after finishing the job complete all as specified and directed. |
| 121 | M&L for preparation of preparation of old painted surfaces of wood/wood based material exceeding 10 cm width or girth and applying one coat of synthetic emnamel paint (white or tinted) including cleaning of windows, doors internal fittings & any other surfaces by removing splashes/ spots after finishing the job complete all as specified and directed. |
| 122 | M&L for preparation of preparation of old painted surfaces of brick/stone/concrete/plastered surface materials exceeding 10 cm width or girth and applying two coat of synthetic emnamel paint (white or tinted) including cleaning of windows, doors internal fittings & any other surfaces by removing splashes/ spots after finishing the job complete all as specified and directed. |
| 123 | M&L for 40 mm thick precast RCC Jallies of pattern as approvedincluding frame , balusters, bressumers, kneelers, string courses fixing in any position with CM 1:4 with two coat of white wash includingdemolition of old jallies and thrown outside MD land complete all as specified and directed |
| 124 | S&F for Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed |
| 125 | S&F in repair for 5 mm thick coloured ACP sheet cladding over MS frame work or any other surfaces including making necessary arrangement for light, vertical , horizontal offset of any size/any pattern complete all as specified and directed. |
| 126 | M&L for point wiring in replacement using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and includingPVC surface conduit of 20 mm bore with accessories in wall floor etc ISI marked, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly , including making good of disturbed surface of cement plaster, whitewash/ distempered match with original colour complete all as specified and directed by Engineer-in-charge for the followings:-(a) one light/ fan/Exhaust fan point controlled by one switch. |
| 127 | (b) One 3 pin 5 amps socket outlet on independent board with other switches. |
| 128 | (c) All as per item No 5 above but for one 3 pin 5 amps socket outlet on the same board with other switches. |
| 129 | (e) All as per item No 4 above but with 2.5 Sq mm copper conductor multistraned pvcinsulated and unshethed cable for Independent one 3 pin 15 Amps socket outlet In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire. |
| 130 | M&L for point wiring in replacement using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box of 1.8 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-charge for Onerlight or fan point, controlled by one, one way switch 5 Amps. |
| 131 | (a) All as per srl item 130 above but for one 5 pin 5 amps socket outlet on the independent board. |
| 132 | (b) All as per item No 130 above but for one 3 pin 5 amps socket outlet on the same board with other switchs. |
| 133 | (d) All as per item No 130 above but with with 2.5 Sq mm cable for Independent one 3 pin 15 Amps socket outlet In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire. |
| 134 | S&F in repairs switch piano 5 amps flush type single pole one way |
| 135 | S&Fin repairs switch piano 16 amps flush type single pole one way |
| 136 | S&Fin repairs socket outlet flush type 3 pin 5 amps |
| 137 | S&Fin repairs socket outlet 2 in 1, 5 pin 16 amps flush type |
| 138 | S&Fin repairs modular switches 6 amps single pole one way |
| 139 | S&Fin repairs modular socketes out let6 amps 5 pin combine 2 Module. |
| 140 | S&Fin repairs modular switches 16 Asingle pole one way, 1 Module. |
| 141 | S&Fin repairs modular socket6-16 A 2/3 pin combined 2 Module. |
| 142 | S & Fin repairs White cover plate with frame,3 module. |
| 143 | S & Fin repairs White cover plate with frame,4 module. |
| 144 | S & Fin repairs White cover plate with frame,6 module. |
| 145 | S & Fin repairs White cover plate with frame,8 module. |
| 146 | S & F in repairs modular gang box for modular switches,3 module. |
| 147 | S & F in repairs modular gang box for modular switches,6 module. |
| 148 | Taking down carefully copper/aluminium point wiring light ,fan, socket or power complete,such as switches, ceiling roses,pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc.Complete all as specified and directed by Engineer-in-Charge. |
| 149 | Material & labour in replacement for sub main wiring with multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC surface conduit pipe medium grade ISI marked (not less than 20 mm dia)along with fittings and accessories all on wall and surface on ceiling and also including the specified runs of specified size earth continuity conductor complete including taking down existing sub main wiring all as specified and directed by Engineer in charge.(2 runs of main cable one run of earth wire one run ofPVC pipe will be measured as an one run)(a) 2 Run of 4.0 Sqmm cable and one run of 4.0 sqmm cable for earth wire. |
| 150 | All as per Item No 18 but 2 Run of 6 Sqmm cable and one run of 6 sqmm cable for earth wire |
| 151 | S&F in repairs MCB 6 to 32 Amps SP ,240 V ,10 KA "C" curve,IP 20 complete all as specified and directed. |
| 152 | S&Fin repairs MCB 40 to 63 Amps SPN ,240 V C curve 10 KA,IP 20 complete all as specified and directed. |
| 153 | Supply and fixing in repairs Fan step regulator, 120W - 2 module |
| 154 | Supply and fixing in repairs ceiling rose,surface type polycarbonate ,isolated body 65 mm 3 terminals (isi marked) complete all as specified and directed. |
| 155 | S&F and testing in replacement of MCB DB SPN 8 way 240 volt with double door, IP - 43 protection system with having 200Amps 2 Nos bus bar for neutral bar and earth bus bar fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type all as directed by Engineer-in-Charge. |
| 156 | Supply and fixing in repairs LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 157 | M&L in repairs for in earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m deep below normal ground level with top edge of the earth plate at a depth not less than1.5m below ground level connected to and including GI earth lead wire 4mm dia by meansof nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with PCC frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GIprotection pipe, test point etc. complete including taking out existing earthing all as specified and directed. Note: -(i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 158 | Supply and fixing in repairs of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 159 | Supply and fixingin repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 160 | Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) . |
| 161 | Supply & fix fan down rod of size 600mm long" made out of 15mm bore duly powder coated GI pipe long complete all as specified and directed |
| 162 | Supply & fixing in repairs Exhaust fan metallic type 300 mm sweep 240 V AC single phase complete with aluminium louvers shutters of any sweep including flexible three core copper conductor cable of 23/0.0076 up to ceiling rose and grounding 04 Nos full threaded bolts and nuts etc all as specified and directed. |
| 163 | Supply & fixing in repairs wall mounted fan 400 mm sweep with stand clamp and other fixtures and connecting up to and including flexible three core copper conductor cable23/0.0076 from ceiling rose to connector block complete all as specified and directed. |
| 164 | Material & labour in replaceemnt for vertical MCB DB TPN 8 Way,IP 43 with 200 amps rated busbar 415 volts suitable for 63 Amps TPN MCCB 16KA as incomer,double door with magnetic locking system all as specified. |
| 165 | Supply & fixing in repairs MCCB 100 Amps,3 Pole,415V 16 KA Complete all as specified and directed. |
| 166 | Supply & fix in repairs Building Security light luminaire LED 22 W 600K,IP-65 with asthetically designed sheet aluminium housing and UV stabilised acrylic cover complete with lamp and internal connection including bracket made of 40 mm dia GI pipe light grade 1.5 m length fixed with MS clamp of suitable size grouted on wall with suitable nos of screws/bolts/nuts etc complete all as specified and directed. |
| 167 | S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 240V including MCB 20 amps. |
| 168 | Supply and fix in replacement Tetra plug 32Amp 3P+N+E |
| 169 | S& F Iin replacement of LED flood light 100 watt 230V AC outdoor type with thermal management in AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and necessary cable connctions complete as directed |
| 170 | Supply and fixingin replacement 1100 volt grade heavy duty cable PVC insulated Al conductor screwed with inner seathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire with one twin core cable flat circulator 6 sqmm solid conductor complete all as specified and directed by Engineer in Charge. |
| 171 | Supply and fixingin replacement 1100 volt grade heavy duty cable PVC insulated Al conductor screwed with inner seathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire with one twin core cable flat circulator 10 sqmm solid conductor complete all as specified and directed by Engineer in Charge. |
| 172 | Dismantling TPN/SPN DB including wooden cover and refixing the DB after removing wooden covera d making good disturbed surface of walls, floors etc.Complete all as specified and directed by Engineer-in-Charge. |
| 173 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core. |
| 174 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core. |
| 175 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for laying of cables, errection of poles, struts/stays etc not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 176 | Returning filling in including spreading leveling watering and well ramming inlayers not exceeding 25 cm in soft / loose soil complete all as specified and directed. |
| 177 | Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils complete all as specified and directed. |
| 178 | M&L for Sand cusioning for cable with screened & washed sand & punning to providea required cover complete all as specified and directed. |
| 179 | Material and labour for stone slab/patti, 40 to 50mm thick, rough dressed, Jodhpur stone slab cover in trenches for protection of cables, 25cm to 35cm wide and 80 cmlong, laid dry abutting each other with gap between adjacent slab not exceeding 10mm over sand cushioning complete all as specified and directed. |
| 180 | S & F LT feeder pillar (kiosk) of suitable made out of 3 mm thickCRCA sheet duly powder coated outdoor type double door with openable front door including locking arrangement with copper busbar 250 Amps rating with MCCB 160 Amps 4 pole 16 KA thermal magnetic adjustable type for incoming and fixed on angle iron frame and PCC plinth complete as directed. |
| 181 | M & L for earthing complete with GI earth plate electrode 60cmX60cmX6mm thick,buried directly in ground(earth pit not less than 2.25metres deep below ground level) with top edge of the platenot less than 1.5 m below ground level,connected to and including GI earth strip 32*6 mm by means of nuts,bolts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of soil, PCC 1:3:6 type C1 in chamber,precast RCC cover 50mm thick in cement concrete 1:2:4 type B1,reinforced with welded steel wire fabric or XPM (weight not less than 4 kg/sqm) with cast iron frame,funnel with wire mesh,20mm bore GI pipe medium grade watering pipe,lugs,40mm bore GI pipe medium grade protection pipe upto 7.7 m as directed. |
| 182 | S&F in repair MCCB, 250 Amps, four pole, 35 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge. |
| 183 | S&F in repair MCCB, 200 Amps, four pole, 25 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge. |
| 184 | S&F in repair MCCB, 100 Amps, four pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge. |
| 185 | S&F in repair MCCB, 63 Amps, four pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge. |
| 186 | Supply,install, testing and commissioning in repairs on load change over switch 100 Amps, four pole, 415V AC, 50HZ enclosed in sheet metal enclosure complete all as specified and directed by Engr-in-charge |
| 187 | Supply,install, testing and commissioning in repairs on load change over switch 125 Amps , four pole, 415V AC, 50HZ enclosed in sheet metal enclosure complete all as specified and directed by Engr-in-charge |
| 188 | Supply,install, testing and commissioning in repairs on load change over switch 125 Amps , four pole, 415V AC, 50HZ enclosed in sheet metal enclosure complete all as specified and directed by Engr-in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
