Tender For Repair Works To All Type Of Electrical Motors In Deep Bore Well In Ward No. 01 To 16 Of Vriddhachalam Municipality
Tender Value
5 Lakhs
Estimated cost
Bid Submission
19 May 2023
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
virudhachalam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Works To All Type Of Electrical Motors In Deep Bore Well In Ward No. 01 To 16 Of Vriddhachalam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeUpto 5 HP |
| 2 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeAbove 7.50 HP to 10.00 HP |
| 3 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeAbove 12.50 HP to 20.00 HP |
| 4 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeAbove 25.00 HP to 30.00 HP |
| 5 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeAbove 35.00 HP to 40.00 HP |
| 6 | Labour charges for the Re-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Upto 5 HP |
| 7 | Labour charges for the Re-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Above 7.50 HP to 10.00 HP |
| 8 | Labour charges for the Re-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Above 12.50 HP to 20.00 HP |
| 9 | Labour charges for the Re-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Above 25.00 HP to 30.00 HP |
| 10 | Labour charges for the Re-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Above 35.00 HP to 40.00 HP |
| 11 | Supplying and replacing the HRC-Fuses conforming to ISI make.including cost and replacing charges etc complete as per standard specifications.(Legrand,L&T or equivalent make)16Amps |
| 12 | Supplying and replacing the HRC-Fuses conforming to ISI make.including cost and replacing charges etc complete as per standard specifications.(Legrand,L&T or equivalent make)32Amps |
| 13 | Supplying and replacing the HRC-Fuses conforming to ISI make.including cost and replacing charges etc complete as per standard specifications.(Legrand,L&T or equivalent make)63Amps |
| 14 | Supply and delivery of following sizeof HDPE PIPES (pn 10)HDPE PIPES - PE 100 AS PER IS 4984/2016.including all cost of materials,labour, conveyance,etc..,complete as directed by the departmental officers.32 mm |
| 15 | Supply and delivery of following sizeof HDPE PIPES (pn 10)HDPE PIPES - PE 100 AS PER IS 4984/2016.including all cost of materials,labour, conveyance,etc..,complete as directed by the departmental officers.50 mm |
| 16 | Supply and delivery of following sizeof HDPE PIPES (pn 10)HDPE PIPES - PE 100 AS PER IS 4984/2016.including all cost of materials,labour, conveyance,etc..,complete as directed by the departmental officers.90 mm |
| 17 | Labour charges for the partialyremoval of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeUpto 5 HP |
| 18 | Labour charges for the partialyremoval of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeAbove 7.50 HP to 10.00 HP |
| 19 | Labour charges for the partialyremoval of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeAbove 12.50 HP to 20.00 HP |
| 20 | Labour charges for the partialyremoval of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeAbove 25.00 HP to 30.00 HP |
| 21 | Labour charges for the partialyremoval of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., completeAbove 35.00 HP to 40.00 HP |
| 22 | Labour charges for thepartialyRe-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Upto 5 HP |
| 23 | Labour charges for thepartialyRe-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Above 7.50 HP to 10.00 HP |
| 24 | Labour charges for thepartialyRe-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Above 12.50 HP to 20.00 HP |
| 25 | Labour charges for thepartialyRe-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Above 25.00 HP to 30.00 HP |
| 26 | Labour charges for thepartialyRe-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Above 35.00 HP to 40.00 HP |
| 27 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., complete.USING SPECIAL TOOLSUpto 5 HP |
| 28 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., complete.USING SPECIAL TOOLSAbove 7.50 HP to 10.00 HP |
| 29 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., complete.USING SPECIAL TOOLSAbove 12.50 HP to 20.00 HP |
| 30 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., complete.USING SPECIAL TOOLSAbove 25.00 HP to 30.00 HP |
| 31 | Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including Removal and dis- jointing submersible cable with proper clamps upto the starter to required depthetc., complete.USING SPECIAL TOOLSAbove 35.00 HP to 40.00 HP |
| 32 | Attending and repairing of Rewinding the burnt out coil to the following HP borewell type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 30 days trail runand3 month warranty (The retrived burnt out coil should be taken back by contractor)For borewell type- upto 7.5HP |
| 33 | Attending and repairing of Rewinding the burnt out coil to the following HP borewell type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 30 days trail runand3 month warranty (The retrived burnt out coil should be taken back by contractor)For borewell type-10.00HP,12.5HP |
| 34 | Attending and repairing of Rewinding the burnt out coil to the following HP borewell type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 30 days trail runand3 month warranty (The retrived burnt out coil should be taken back by contractor)For borewell type-15.00HP |
| 35 | Attending and repairing of Rewinding the burnt out coil to the following HP borewell type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 30 days trail runand3 month warranty (The retrived burnt out coil should be taken back by contractor)For borewell type-20.00HP |
| 36 | Attending and repairing of Rewinding the burnt out coil to the following HP borewell type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 30 days trail runand3 month warranty (The retrived burnt out coil should be taken back by contractor)For borewell type-25.00HP |
| 37 | Attending and repairing of Rewinding the burnt out coil to the following HP borewell type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 30 days trail runand3 month warranty (The retrived burnt out coil should be taken back by contractor)For borewell type-30.00HP |
| 38 | Attending and repairing of Rewinding the burnt out coil to the following HP borewell type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 30 days trail runand3 month warranty (The retrived burnt out coil should be taken back by contractor)For borewell type-35.00HP |
| 39 | Repairing and Reconditioning of following HP borewell submersible motorPumpincludingall cost of materials such as Replacement of new thrust Bearing,shaft ,bushes,maching and labour cost etc.including all cost of materials,labours,etc.., complete as directed by the departmental officers.For- V845HP to 35 HP mixed flow |
| 40 | Repairing and Reconditioning of following HP borewell submersible motorPumpincludingall cost of materials such as Replacement of new thrust Bearing,shaft ,bushes,maching and labour cost etc.including all cost of materials,labours,etc.., complete as directed by the departmental officers.For V6 type-30HP to 7.50 HPmixed flow |
| 41 | Repairing and Reconditioning of following HP borewell submersible motorPumpincludingall cost of materials such as Replacement of new thrust Bearing,shaft ,bushes,maching and labour cost etc.including all cost of materials,labours,etc.., complete as directed by the departmental officers.For- V845HP to 35 HP radial flow |
| 42 | Repairing and Reconditioning of following HP borewell submersible motorPumpincludingall cost of materials such as Replacement of new thrust Bearing,shaft ,bushes,maching and labour cost etc.including all cost of materials,labours,etc.., complete as directed by the departmental officers.For V6 type-30HP to 7.50 HPradial flow |
| 43 | Repairing and Reconditioning of following HP borewell submersible motorPumpincludingall cost of materials such as Replacement of new thrust Bearing,shaft ,bushes,maching and labour cost etc.including all cost of materials,labours,etc.., complete as directed by the departmental officers.ForV6type-up to 5.00 HP |
| 44 | Repairing and Reconditioning of following HP borewell submersible motorPumpincludingall cost of materials such as Replacement of new thrust Bearing,shaft ,bushes,maching and labour cost etc.including all cost of materials,labours,etc.., complete as directed by the departmental officers.ForV4type-up to 5.00 HP |
| 45 | Repairing and reconditioning of following 3 phase oilimmersedstarter suitable submersible motor.including all cost of materials such as 3 pole magnetic contactor,coil rewinding,etc..,complete as directed by the departmental officers10 HP to 20 HP |
| 46 | Repairing and reconditioning of following 3 phase oilimmersedstarter suitable submersible motor.including all cost of materials such as 3 pole magnetic contactor,coil rewinding,etc..,complete as directed by the departmental officers25 HP to 30 HP |
| 47 | Repairing and reconditioning of following 3 phase oilimmersedstarter suitable submersible motor.including all cost of materials such as 3 pole magnetic contactor,coil rewinding,etc..,complete as directed by the departmental officers35 HP to 45 HP |
| 48 | Repairing and reconditioning of following 3 phase star delta starter suitable submersible motor.including all cost of materials such as 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter(65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector swicth, Minature circuitr braeker, Thermal Overload relay,Air Break contactors suitable for next Standard higher KW ratingetc..,complete as directed by the departmental officers. 10 HP to 20 HP |
| 49 | Repairing and reconditioning of following 3 phase star delta starter suitable submersible motor.including all cost of materials such as 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter(65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector swicth, Minature circuitr braeker, Thermal Overload relay,Air Break contactors suitable for next Standard higher KW ratingetc..,complete as directed by the departmental officers. 25 HP to 30 HP |
| 50 | Repairing and reconditioning of following 3 phase star delta starter suitable submersible motor.including all cost of materials such as 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter(65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector swicth, Minature circuitr braeker, Thermal Overload relay,Air Break contactors suitable for next Standard higher KW ratingetc..,complete as directed by the departmental officers. 35 HP to 45 HP |
| 51 | Repairing and reconditioning of following single phase starter suitable submersible motor.including all cost of materials such as 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter(65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector swicth, Minature circuitr braeker, Thermal Overload relay,Air Break contactors suitable for next Standard higher KW ratingetc..,complete as directed by the departmental officers. up to 5.00 HP |
| 52 | Supply and delivery of following sizeofSS Nippleforconnection nipple with SS bolt and nuts including all cost of materials,labour, conveyance,etc..,complete as directed by the departmental officers. 32 mm |
| 53 | Supply and delivery of following sizeofSS Nippleforconnection nipple with SS bolt and nuts including all cost of materials,labour, conveyance,etc..,complete as directed by the departmental officers. 50 mm |
| 54 | Supply and delivery of following sizeofSS Nippleforconnection nipple with SS bolt and nuts including all cost of materials,labour, conveyance,etc..,complete as directed by the departmental officers. 63mm |
| 55 | Supply and delivery of following sizeofSS Nippleforconnection nipple with SS bolt and nuts including all cost of materials,labour, conveyance,etc..,complete as directed by the departmental officers. 90 mm |
| 56 | GST 18% |
AI Tender Summary
Tender Timeline
May 12, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 19, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender