Tender For Relaying Ofb.T Surface To Meera Nagar (Unicode No: 180/04/R068 )Length-196M , Width-4.5Ward No:04
Tender Value
14.50 Lakhs
Estimated cost
Bid Submission
19 May 2023
0 days left
EMD
14500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Relaying Ofb.T Surface To Meera Nagar ( Unicode No: 180 / 04 / R068 ) Length-196M , Width-4.5Ward No:04
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-May-2023 | Financial Bid | Other | 19-May-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply and other Pipe lines. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications. |
| 2 | Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900 |
| 3 | Providing, Laying, Spreading and compacting graded stone aggregate to Wet Mix Macadamspecification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density |
| 4 | Providing and Laying Primecoatof 7kgs/10sqm over unprimed surface treated with primer using 7kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the reqired quantity of bituminous binder as tack coat manually etc..., complete. |
| 5 | Applying Tack Coat over existing surface using 2.5 Kg of Bitumen emulsion per 10 Sq.m including cost and conveyance of bitumen emulsion and labour charges for cleaning & preparing the road surface and applying required quantity of bitumen emulsion as tack coat including all other tools and plants etc. completed as per standard speicifications. |
| 6 | Providing and laying 50mm compacted thick dense bituminous mecadam using 0.24 cum of 26.5 – 13.2mm Grade metal and 0.25 cum of 13.2 – 2.36mm Graded metal and 0.23 of 2.36mm and below metal with 53.2 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMPS site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tonne capacity, conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by 80-100 KN power roller to the required density etc., including labour for loading bitumen into bitumen tank and metal to feeder unit, labout for attending to paver site etc., including hire charges and fuel charges for 20-30 tonne CMP with bitumen boiler, tipper trucks paver finisher, power rollers and all other tools and plants required, including all other incidental charges etc., complete as per specification using CMP Clause 505 of MOST |
| 7 | Providing and laying Bituminous Concrete to 30 mm thick using 0.13 cum of 19.50-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30/ VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20- 30 t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 |
| 8 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 9 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 10 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 11 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 12 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 13 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 14 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 15 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 16 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 17 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 18 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 19 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 20 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 21 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 22 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 23 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 24 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 25 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 26 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 27 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 28 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 29 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 30 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 31 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 32 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 33 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 34 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 35 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 36 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 37 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 38 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 39 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 40 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
| 41 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflective glass beads @ 250gms per sqm area thickness of 2.5mm as per IRC:35. The finished surface to be level, uniform and free form streaks and holes all complete as per Technical specifications and as directed by the Engineer - in - Charge. |
AI Tender Summary
Tender Timeline
May 17, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
May 19, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 19, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender