|
| 1 | GST as applicable will be paid extra. The contractor/firm will deposit the same with the concerned department and thereafter will submit the copy of deposit slip to the concerned office |
| 2 | Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres. |
| 3 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outsidethe building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres |
| 4 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 5 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) |
| 6 | Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels |
| 7 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 8 | Cement Concrete 1:8:16 with 40mm gauge stone aggregate. |
| 9 | Cement Concrete 1:6:12 withstone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type) |
| 10 | Cement Concrete 1:5:10 withstone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type) |
| 11 | Cement Concrete 1:4:8 withstone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type) |
| 12 | Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type) |
| 13 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth . |
| 14 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure . |
| 15 | Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded. |
| 16 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded |
| 17 | Supplying & laying dry brick bats |
| 18 | First class burnt work laid in cement sand mortar 1:7 in foundation and plinth |
| 19 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth . |
| 20 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 21 | First class burnt brick work laid in cement sand mortar 1:5 in super structure |
| 22 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth |
| 23 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level |
| 24 | First class burnt brick work laid in mud mortar in foundation and plinth |
| 25 | Extra for c above 4 meters (where any single storey exceeds 4 metres in height) for every additional height of 2 metres or part thereof for Brick Work/ Concrete Block/ Clay Block. |
| 26 | 115mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth . |
| 27 | Extra labour for First class burnt brick masonry in well steining of circular well. |
| 28 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. |
| 29 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16 |
| 30 | Bottom Khurra on ground 1.2mx0.6m consisting of brick on edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3 |
| 31 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth,here specially specified. |
| 32 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and to the entire satisfaction of engineer-in- charge. |
| 33 | Providing and fixing 110 mm dia SWR UPVC rain water pipe (ring fitted Type A ) as per IS : 13592 including jointing during masonary complete as per specifications and to the entire satisfication of Engineer-in-charge.(if fixed on wall face clamp to be paid separatly as per respective item) |
| 34 | Providing and fixing 110 mm dia SWR UPVC bend for rain water pipe as per IS : 14735 including jointing as per specifications and to the entire satisfaction of Engineer-in-charge. |
| 35 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 36 | Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material |
| 37 | Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material |
| 38 | Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material |
| 39 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in jointsincluding corners angles and beading. |
| 40 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). |
| 41 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semiatt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) andjointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 42 | Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarsesand). |
| 43 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydrauliccompaction machine and of approvedsize and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths). |
| 44 | 12.5 mm thick cement plaster 1:3 |
| 45 | 12.5 mm thick cement plaster 1:4 |
| 46 | 12.5 mm thick cement plaster 1:5 |
| 47 | 12.5 mm thick cement plaster 1:6 |
| 48 | 20 mm thick cement plaster 1:4 in two coat work |
| 49 | 20mm thick cement plaster 1:5 in two coat work |
| 50 | 20mm thick cement plaster 1:6 in twocoats work |
| 51 | Plastering on underside of ceiling 10mmthick cement plaster 1:4 |
| 52 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 53 | Painting two or more coats with aluminum paint to give an even shade excluding priming coat |
| 54 | Painting two or more coats excluding primingcoat with ready mixed paint for metallic surfaces in all shades on steel or iron work |
| 55 | Painting one coat with aluminum paint on old work to give an even shade |
| 56 | Painting two or more coats with anticorrosive bitumastic Paint to give an even shade |
| 57 | Applying priming coat with cement primer inall shade on newly plastered or concreteexterior surface |
| 58 | Finishing walls with acrylic smooth exteriorpaint of required shade with two or more coatsapplied @ 1.67 litre/10Sqm over andincluding base coat of water proofing CementPaint applied @ 2.20 Kg/10 Sqm |
| 59 | Preparation of plastered or concrete surfacefor painting (including sand papering thesurface) using ready mixed cement based wallputty by applying two or more coats to getrequired finish |
| 60 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 61 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings(Excluding sliding bolt) |
| 62 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. Glazing and paneling to be paid for separately) : |
| 63 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. Glazing and paneling to be paid for separately) : |
| 64 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides. |
| 65 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) |
| 66 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge. |
| 67 | Steel work fixed independently without connecting plates including cutting hoisting and fixing in position : flats |
| 68 | Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position.-For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span |
| 69 | Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects. Above 20mm dia bars |
| 70 | Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-1985) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete. |
| 71 | Welding by gas or by electric plant, including carriage to and from workshop etc. |
| 72 | Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material frommarket to workshop & workshop to site of work. |
| 73 | water bound macadam grading. Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading inuniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications |
| 74 | Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications |
| 75 | Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above: From 0 to 15m |
| 76 | Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above: Exceeding 15m but upto 30m |
| 77 | Providing ,laying, jointing, fixing and testingISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing,cutting, threading Inside building complete.-15 mm i/d |
| 78 | Providing ,laying, jointing, fixing and testingISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing,cutting, threading Inside building complete.- 20 mm i/d |
| 79 | Providing, fixing and jointing G.I UnionCouplings(of approved make with theapproval EIC) as per IS 1879 in G.I. Pipelines complete in all respect.-15 mm |
| 80 | 20mm i/d G.I. Union |
| 81 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.20mm i/d Gun Metal peet valve heavypattern. |
| 82 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.25mm i/d Gun Metal peet valve heavypattern. |
| 83 | Providing & fixing Cast Iron suface box for Peet Valve, Stop Cock including all carriages complete. |
| 84 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.Through wall 22.86 cm thick |
| 85 | Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and makinggood the same & finishing according to existing finish where required.-Through floor or roof 15.00cm thick |
| 86 | Providing and filling joint sealing compound with coarse sand and 6 percent bitumen by weightcomplete as per drawings and technical clause 2605 of MORT&H specifications |
| 87 | Excavation manually in trenches with straight or open cutting in built up street/ lane having wall to wall width of street/ lane upto 3.0 metre, for intramural sullage drains, extramural intercepting drains and outfall drains, storm water channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineerin- charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic. Providing and fixing and maintenance of caution boards, fencing, night signals, for leads upto 15m and for all lifts and subsequent refilling, watering and dressing upto groung level, including removal of surplus spoil from the site upto 15 metre distance complete in all respects: All classes of soil except rocky |
| 88 | Earth work in excavation for storage andsedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed,trimming of sides and side slopes to fulldimension and depth as shown on thedrawings or as shall be required by Engineerin- charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures includingwatering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.-Depth upto 1.5 m B.G.L |
| 89 | Providing orange colour safety footrestof minimum 6mm thick plasticencapsulated as per IS:10910 on 12mmdia steel bar confirming to IS: 1786 |
| 90 | Providing and fixing RCC manhole covers only 500mm i/d RCC man hole cover only as per ISI-Heavy duty |
| 91 | Providing and fixing RCC manhole covers only 450mm i/d RCC man hole cover only as per ISI -Light duty |
| 92 | Providing, lowering, cutting & jointing salt glazed stone ware pipes and specials ISI marked as per IS: 651-2007 class Sp-1 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc., cutting of concrete beds and joints holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching, haunching andenvelopes are completed including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best spun Jute yarn as per IS:1887, finishing and trowelling of each joint at an angle of 45 degree with the longitudinal axes of pipe, watering, keeping the joint covered and wetted till the same are cured, testing the sewerage line for leakageand making all leakages and defects good as laid in the contract specification, chipping and finishing the cut surface to uniform finish to the entire satisfaction of engineer-in-charge Including all cartage etc complete in all respects: 100mm i/d pipe |
| 93 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.: Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal |
| 94 | Extra for every 0.30 metre depth of inspection chamber.450mm x 450mm inside |
| 95 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 96 | Extra for providing and fixing C.P. Brassshort flush bend 32mm instead of PVC short bend. |
| 97 | Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. |
| 98 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 99 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.Size 550 mm x 400 mm x 815 mm |
| 100 | Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required by the Engineer-in-charge. |
| 101 | Providing and fixing vitreous chinawarepedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.Vitreous chinaware standard white pedestal for wash hand basin. |
| 102 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm |
| 103 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. :C.P. brass towel Rails size 15mm dia 610mm long |
| 104 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect.: CP brass Acrylic Shelf size 560mmx130mm |
| 105 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) : Size 600mmx400mm |
| 106 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.: C.P. brass Bib cock foam flow without flange |
| 107 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.: C.P.brass 15mm stop cock Male and female end |
| 108 | Providing & fixing in position PVC tube connection of size 15mm x 300 mm with C.P. Brass nut |
| 109 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc.: With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg) |
| 110 | Providing and fixing in position Centrifugally cast iron soil waste vent or antisyphonage pipes single socket to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing.: 100mm i/d single socket Centrifugally cast iron pipe lines laid complete |
| 111 | Providing and fixing in position Centrifugally cast iron soil waste vent or antisyphonage pipes single socket to I.S.I. specification of E.D.C manufacture or of any other reputedfirm including cutting, jointing, wastage, but excluding cost of lead jointing.: 75 mm i/d single socket Centrifugally cast iron pipe lines laid complete |
| 112 | Providing and fixing in position gratings150mm x 150mm for gully trap.-H.C.I. grating including painting with black bitumastic superior paint of approved manufacture three coats. |
| 113 | Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. manufacture or any other reputed firm including cost of lead yarn,fuel and tools etc.-100mm i/d (1.36 kg.) |
| 114 | 75mm i/d (1.13 kg.) |
| 115 | Providing and fixing in position Centrifugally cast iron special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firmincluding cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. : 100mm i/d Cowls |
| 116 | Providing and fixing in position Centrifugally cast iron special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. : 75mm i/d Cowls |
| 117 | Providing and fixing in position Centrifugally cast iron special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firmincluding cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 75mm i/d Collars |
| 118 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. : PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 119 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.: Triple Layer Tanks |
| 120 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out ofside size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standarddesign minimum depth of water should be 150 mm with a minimum seal 50mm.: 100mm internal Diametre S.W.gullytrap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x300mm and out of side size 330mm x 330mm |
| 121 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall 1.5sq. mm, 1100volts grade to be laid in HDPE electrical conduit pipe 20mm/25mmdia. ISI Marked, recessed in wall etc.,complete with powder coated/anodizedconcealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metalfan box (1.6mm thick shape hexagonal), CICircular junction Boxes (Four way 1½\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm,1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (withfinishing the surface):- |
| 122 | Wiring fan point (Without fan box) |
| 123 | Wiring fan point (With fan box) |
| 124 | Wiring light point |
| 125 | Wiring call-bell point |
| 126 | Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) |
| 127 | Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch |
| 128 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 129 | PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq.mm, 1100volts grade |
| 130 | PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade |
| 131 | PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade |
| 132 | Supply & erection of Heavy guagewelded conduit pipe (ISI marked) as perIS:9537:Part-II for wiring purposesincluding bends, junction boxes, Steelhooks, GI saddle clamps and other pettymaterials etc., where necessaryincluding painting as per PWD GeneralSpecifications:- |
| 133 | Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) On Surface |
| 134 | Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 135 | MCB Single Pole 0.5-4amp. (10kA, Curve-C) |
| 136 | MCB Single Pole 50, 63amp. (10kA, Curve- C) |
| 137 | Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&Ndistribution board with provision DP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB\"s/ RCCB\"s/ RCBO\"s as incomer and SP MCB\"s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- |
| 138 | SP&N Double Door Distribution Board 12 way each |
| 139 | Non - Scheduled Items |
| 140 | Earthfilling in yard area including carriage, laying, watering and compaction as per specifications. |
| 141 | Cement Slurry of cement to sand ratio 1:6 with cement contentnot less than 150kg/100sqm |
| 142 | Supplying and spreading of crushed stone3/4\" nominal size(20mm) in 3\" (75mm) thick layer over PCC flooring in the switch yard area marked or as per directions of Engineer-in-Charge. |
| 143 | Flooring of Cement Concrete 1:5:10 with crushed stone 20 mm size mechanically mixed laid in 75 mm thickness in blocks of size 3.0mx3.0m using shuttering complete in all respect including preparation of surface for laying concrete. |
| 144 | P&F 200 watt gate light post /lantern of crompton greeves |
| 145 | P&F steel gate 5.80 m wide complete as per drawing. |
| 146 | S/F Ceiling light of 2\"x2\"of crompton make 42 Watt( Model- CFFQ-11336 including Tube rods) |
| 147 | Providing and fixing 15 watt Panel Trim ;Havells\" around downlitter |
| 148 | P & F Acid vapour proof Tube fitting of crompton make(TSPFC11228EB) of 2x28 WT-5 |
| 149 | Providing andfixing general purpose tube light LEDfitting of Cromptom Make on wall 20 Watts |
| 150 | Providing and fixing 18\" dia exhaust fans in switch house building |
| 151 | Providing and fixing 12\" dia exhaust fans in switch house building |
| 152 | Providing and fixing electric ceiling fans with regulator complete in all respects 1400 mm sweep confirmingto IS - 374 / 79 duly amended up to date. |
| 153 | P&F various angle iron posts complete as per drawing |
| 154 | P&F M.S Cable Racks made OF M.S Angle Iron for various size of 50x50x6 ,40x40x5mm , M.S Angle Iron for various size of75x6 mmcomplete as per dwg |
| 155 | Providing and fixing MS Angle iron nosing made out of50x50x3 angle and flat 25x3 mm 600mm c/c wt 2.56 kg/mtr. complete in all respects |
| 156 | Supply & Placinfg in positions cheqquerred plate 5 mm thicki/c cutting & grinding of edges complete in all respects |
| 157 | P/F angle nosing of MS angle 30x30x3 mm & 150 mm LONG |
| 158 | Fixing of Template along with foundation bolts as per Drg. |
| 159 | Supplying hoisting of Ferro cement trench cover frame of size given below made of MS flat 50X3mm with 6mm dia bars with 9/2\" and 9\"C/C welded to flat with lifting hooks as per drg. no C/W DS-2537 R5 and CW/DS 2420 R3complete as per specification no. 13 Trench Cover T-4 Type( 2’-6” x 1’-9”) |
| 160 | Supply , Hoisting & plaicngof ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 \"and 9\"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete as per specification no. 13 -T3 - type (2\"-2\"x2\"-2\") |
| 161 | Supply , Hoisting & plaicngof ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 \"and 9\"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete as per specification no. 13 -P - type (3\"-4\"x1\"-6\") |
| 162 | Supply , Hoisting & plaicngof ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 \"and 9\"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete as per specification no. 13-T1 - type (2\"-8\"x1\"-6\") |
| 163 | Providing and fixing wiring guage 12x22 size in aluminium section |
| 164 | Providing and fixing3BHP non clog pump |
| 165 | Providing and fixing GI barbed wire in 4 rows complete as per specification |
| 166 | Providing and fixing neting mesh complete in as aspect as per specification |
| 167 | Providing and fixingGI tata durashine sheet complete as per specifictaion |
| 168 | Landing rates including extra carriage and difference of quarry rates wherever applicable. |
| 169 | Cement |
| 170 | Steel |
| 171 | Fine sand |
| 172 | Coarse Sand |
| 173 | Crushed bajri 13.2mm |
| 174 | Crushed bajri 11.2mm |
| 175 | Stone metal 40mm |
| 176 | Bricks |
| 177 | Tiles |
