Public Administrative Department Government Departments Closing in 0 days TDR #37619869

Tender For Purchase Of 2 Nos Of Light Commercial Vehicle (Lcv) At Kuzhithurai Municipality

Issued by Government Departments · kuzhithurai, Tamil Nadu
Tender Value
14.60 Lakhs
Estimated cost
Bid Submission
18 May 2023
0 days left
EMD
14600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kuzhithurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Purchase Of 2 Nos Of Light Commercial Vehicle ( Lcv ) At Kuzhithurai Municipality , Supply And Delivery Of Light Commercial Vechicle With Following Specification Engine Cc -700-1250 Cc With 2 To 4 Cylinder, Max20-30 Bhp @2500Rpm And Above Load Capacity - 2. Cum With Fuel Engine , Vechichle Emission Norms -Bs Vilength Of Chasis :3800Mm - 3950 Mm, Width Of Chasis :-1500Mm To 1550 Mm Ground Clearence 150Mm -165Mm , Fuel Tank Capacity : Diseal 30 To 40 Ltrscng 12-25Kh Size Of Tyres -145R 12 - 5 Nos., Wheelbase - 1900Mm- 2250 Mm Gross Vechicle Weight - 1550 Kg- 1900 Kg Single Plate Dry Friction Diapharm Cluth With Manual Transmission System And 4 Nos. Speeds ( 4F+1R ) Power Steering And Speed Governors Fitted. Pay Load : 800 To 1000 Kg Tipper Body Length : 2100 -2200Mmmild Steel, Tipper Body Width : 1400 -1500Mmmild Steel Tipper Body Height : 750 Mm To 950Mm Mild Steel And Side Portion ( Lh And Rh ) And Rear Door Sheet 2Mm Thick, Mild Steeltipper Body Top Sheet Including Frame Sheet Thickness1.6 Mm Mild Steel , Tipper Body Top Lid Sheet Thickness : 1.2Mm Mild Steel And Tipper Container Should Be Fabricated With Two Doors On The Rear Side And Four Doors On Four Top Corners Of The Containers With Hinges And Locking System. A Partition Should Be Provided On The Middle Of Containeralong The Vertical Length Of The Body. Tipper Body Top Lid Main Sheet Thickness 75X40x6mm. Repurted Hydraulic Cylinder Make, With Maiengine Hydraulic System Driven , Pump With Is Make Standard And Painting With One Coat Of Anticorrasive Epoxy Primer And Two Coats Of Enamel Paint For Approved Quality To Ensure Longlasting Resistance For Weatherizing And Breakage. Then Color Shade Should Be As Per Norms Lettering To Be Carried Out As Dept.Officers. Tipper Body Rear Door Shall Be With Necessary With Locking Facility And 25000Km / 12 Months Whichever Is Earlier Warranty And Vechicle With Sensor And Gps Tracker As Per The Dma Specifications. , Gst 28%

BOQ

Name of work:Purchase of 2 nos ofLight Commercial Vehicle (LCV)at Kuzhithurai Municipality.
Sl. No. Item Description
1Supply and Delivery of Light Commercial Vechicle With Following Specification Engine CC -700-1250 CC with 2 to 4 Cylinder, MAX20-30 BHP @2500rpm and above Load Capacity - 2. CUM With Fuel Engine , Vechichle Emission Norms -BS VILength of Chasis :3800mm - 3950 mm, Width of Chasis :-1500mm to 1550 mm Ground Clearence 150mm -165mm , Fuel Tank Capacity : Diseal 30 to 40 ltrsCNG 12-25KH Size of Tyres -145R 12 - 5 nos., WheelBase - 1900mm- 2250 mm Gross Vechicle Weight - 1550 kg- 1900 Kg Single Plate dry Friction diapharm Cluth With manual Transmission System and 4 Nos. speeds (4F+1R) power steering and speed governors fitted. Pay Load : 800 to 1000 Kg Tipper Body length : 2100 -2200mmMild Steel, Tipper Body Width : 1400 -1500mmMild Steel Tipper Body Height : 750 mm to 950mm Mild Steel and side portion (LH and RH) and Rear door sheet 2mm thick, mild steelTipper Body top sheet Including Frame Sheet Thickness1.6 mm Mild Steel , Tipper Body Top Lid Sheet Thickness : 1.2mm Mild Steel and Tipper Container Should be Fabricated with two doors on the rear side and four doors on Four top corners of the containers with hinges and locking system. A Partition should be provided on the middle of containeralong the vertical length of the body. Tipper Body Top lid Main sheet thickness 75x40x6mm. repurted Hydraulic cylinder make, With maiEngine Hydraulic System driven , Pump With IS Make Standard and painting with one coat of Anticorrasive epoxy primer and two coats of enamel paint for approved quality to ensure longlasting resistance for weatherizing and breakage. Then color shade should be as per norms lettering to be carried out as dept.officers. Tipper body rear door shall be with necessary with locking facility and 25000Km/12 Months Whichever is earlier Warranty and Vechicle with sensor and GPS tracker as per the DMA specifications.
2GST 28%

AI Tender Summary

OUR REF NO 37619869
AUTHORITY Government Departments
TENDER VALUE 14.60 Lakhs
LAST DATE 18-05-2023
Authority
Authority Name municipality
Work Description Purchase Of 2 Nos Of Light Commercial Vehicle ( Lcv ) At Kuzhithurai Municipality , Supply And Delivery Of Light Commercial Vechicle With Following Specification Engine Cc -700-1250 Cc With 2 To 4 Cylinder, Max20-30 Bhp @2500Rpm And Above Load Capacity - 2. Cum With Fuel Engine , Vechichle Emission Norms -Bs Vilength Of Chasis :3800Mm - 3950 Mm, Width Of Chasis :-1500Mm To 1550 Mm Ground Clearence 150Mm -165Mm , Fuel Tank Capacity : Diseal 30 To 40 Ltrscng 12-25Kh Size Of Tyres -145R 12 - 5 Nos., Wheelbase - 1900Mm- 2250 Mm Gross Vechicle Weight - 1550 Kg- 1900 Kg Single Plate Dry Friction Diapharm Cluth With Manual Transmission System And 4 Nos. Speeds ( 4F+1R ) Power Steering And Speed Governors Fitted. Pay Load : 800 To 1000 Kg Tipper Body Length : 2100 -2200Mmmild Steel, Tipper Body Width : 1400 -1500Mmmild Steel Tipper Body Height : 750 Mm To 950Mm Mild Steel And Side Portion ( Lh And Rh ) And Rear Door Sheet 2Mm Thick, Mild Steeltipper Body Top Sheet Including Frame Sheet Thickness1.6 Mm Mild Steel , Tipper Body Top Lid Sheet Thickness : 1.2Mm Mild Steel And Tipper Container Should Be Fabricated With Two Doors On The Rear Side And Four Doors On Four Top Corners Of The Containers With Hinges And Locking System. A Partition Should Be Provided On The Middle Of Containeralong The Vertical Length Of The Body. Tipper Body Top Lid Main Sheet Thickness 75X40x6mm. Repurted Hydraulic Cylinder Make, With Maiengine Hydraulic System Driven , Pump With Is Make Standard And Painting With One Coat Of Anticorrasive Epoxy Primer And Two Coats Of Enamel Paint For Approved Quality To Ensure Longlasting Resistance For Weatherizing And Breakage. Then Color Shade Should Be As Per Norms Lettering To Be Carried Out As Dept.Officers. Tipper Body Rear Door Shall Be With Necessary With Locking Facility And 25000Km / 12 Months Whichever Is Earlier Warranty And Vechicle With Sensor And Gps Tracker As Per The Dma Specifications. , Gst 28%
Basic Detail
Tender No 871/2023/E1
Bidding Type Tender
Location
City kuzhithurai
State Tamil Nadu
Key Dates
Publish Date 10 May 2023
Submission Date 18 May 2023
Open Date 18 May 2023
Finance
Tender Value 14.60 Lakhs
Tender Fee Ref. Documents
EMD 14600
Exemption Not Available
Document List
1b0c292d-f2ff-4a88-a629-864082c9a420.html
BOQ_372065.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 10, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
May 18, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 18, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

1b0c292d-f2ff-4a88-a629-864082c9a420.html

xls

BOQ_372065.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders