|
| 1 | Earth work excavation -Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth SS 20 B |
| 2 | Earth workexcavation and depositing on bank within an initial lead of 10 m and the following liftsand classfication of soils. Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil ( SS 20B) sump ( firstdepth of 2m) |
| 3 | sump (Seconddepth from 2.00 m to 3.00 m below G.L.) |
| 4 | Pump room |
| 5 | Supplying and filling in foundation andbasement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 6 | Plain Cement Concrete 1: 4 : 8 (One cement, Four Sand and eight hard broken granite stone of size 40 mm ) for levelling course for fountation including curing, finishing etc., complete complying with standard specification and as directed by the TWAD Board officers |
| 7 | sump |
| 8 | pump room& road restoration |
| 9 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 10 | Reinforced Cement Concrete M30 for the following members.The rate to exclude the cost of supplying, fabricating and placing steelin position Upto 1.50 m depth below G.L. |
| 11 | Above 1.50 m upto 4.50 m depth below G.L. |
| 12 | Upto 4.50 m height above G.L. |
| 13 | Centering for soffits of reinforcement concrete slabs or plain surface including strutting upto 3m height using m.s. sheet of size 90cm and BG 10 gauge stiggened with welded MS angles of sizemm x 3mm laid over oak (Country Wood) Joints of 10cm x 6.5cm space Upto 3.30 m below&aboveG.L.- Curved surface |
| 14 | Upto 3.30 m Below GL&above GL - Circular column |
| 15 | 3.30 m to 4.30m above G.L. - plane surface |
| 16 | Column |
| 17 | Plinth Beam |
| 18 | Footing |
| 19 | Painting two coasts with approved cement paint over the exposed surface (aboveG.L.)including cleaning, preparing surface and curing etc., complete complying with standard specification and as directed by TWAD Board Officers. |
| 20 | Supplying, fabricating and palcing in position of MS & HSD grills for reinforcement for various members for all R.C.C. works including cost of steel, binding wire etc. complete complying with standard specification and as directed by the TWAD Board office sump |
| 21 | pump room |
| 22 | Supply ,delivery and fixing of RCC inside Access ladderof size 0.10x0.15x4.74m with steps of size 0.15x0.05x0.45m at an interval of 0.3m c/c using M30 concrete and RTS reinforcement with main rod of 10mm 4 nos. for Rib and 8mm stirrups at 0.15m c/c and with main rod of 8mm 2 nos. for each step with 8mm distributer at 0.1m c/c including cost of all materials , moulding charges, all labour charges finishing curing etc.. complete as directed by TWAD Board officers.For storage depth of 3.50m |
| 23 | Supply, Delivery and fixing of Outside MS Ladder of 45cm clear wide made out of 50mmx50mmx6mm MS angle for sides and steps in 16mm plain rods fixed at 30cm c/c welded, jointed etc, and as directed by TWAD Board officers. |
| 24 | Supplying and fixing in position of 0.60 x 0.60 m size water tight C.I. Manhole frame with cover of approved pattern at the roof slab including the cost of men & materials complying with standard specification and as directed by the TWAD board officers. |
| 25 | Supplying and fixing in position of enamel coated water level indicator with ball floating arrangements on side wall of sump including the cost men & materials complying with special spacification and as directed by the TWAD Board Officers. |
| 26 | Reinforcement Cement Concrete 1 : 1 1/2 : 3 mix ( one Cement one and half sand and three hard broken granite stone of 20mm size hard broken granite stone) for ventilator of dia. 0.45 m with 0.05m thick. including the cost of men & materials complying with standard specification and as directed by the TWAD Board Officers. |
| 27 | Refilling the foundation with excavated earth (other than sand) including watering, ramming, consolidating etc. complete complying with standard specification and as directed by the TWAD Board Officers. |
| 28 | Providing cut stone 0.45X0.45 X 0.15 m set in CM 1:3 mix below inlet pipe including the cost of men & materials complying with standard specification and as directed by the TWAD Board Officers. |
| 29 | Painting TWAD Board Emblem in accordance with the size and specifications as approved by the Board on the side wall of Sump including cost of all consumable, one coat of base paint etc complete and as directed by the TWAD Board officers |
| 30 | Pipe connection work to sump including cost labour, materials etc. (SEPARATE SHEET) |
| 31 | Brick work in cement mortar 1:5 using country bricks of size 8 3/4\" x 4 1/1\" x 2\" |
| 32 | Plastering in Cement mortar 1:5 of thickness 12 mm |
| 33 | White washing two coats |
| 34 | Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) |
| 35 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.(TWAD sor 22-23 pg 91)Doors - Fully Panelled Double Leaf |
| 36 | Windows - Fully Panelled Double Leaf |
| 37 | 5T capacity hand operated over head Travelling (HOT) crane suitable for a span upto 6 Mtrs, and travel length upto 10 M with clear lift upto 6 M including gear type chain pulley block and geared Travelling trolley complete with all accessories including girder(TWAD SOR 22-23 pg no129) |
| 38 | 4 Way Vertical TPMCB sheet steeldistribution boards Flush type/Surface type fitted with Bus bars and Neutral links with single / three phase MCB out goings and separate 4 way provision for accommodating one No. 4 pole incoming MCB /solator and another separate 4 way provision for accommodating one No. 4 pole ELCB/ RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm(TWAD SOR 22-23 PG NO 230) |
| 39 | Supplying and fixing capacitor type ceiling fan complete with down rod blades, shakle canopies etc., for operation n 230 volts, 50 cycles. Single phase AC supply, conforming to ISS-374-1979 and with double ball bearing system.(TWAD SOR PG NO 22-23 197) |
| 40 | Supplying and fixing of 1 x 4\" - 36/40 watts Gr. A industrial type fluorescent fitting having stove enameled white reflector inside and gray or green coloured top complete the low loss open construction copper would ferromagnetic ballast starters locking (twad sor 22-23 pg no 192) |
| 41 | Supplying and fixing cast Aluminium round or oblong type bulk head fiiting with GI wire guard glass cover with 15 watts 230V CFL lamp a required. |
| 42 | Supply and delivery of Horizontal split casing centrifugal pump (1500RPM) conforming to IS 1520 and as amended thereafter with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase , 415 V , 50 Hz , 1500 RPM.(4000 lpm x 35 m ) |
| 43 | AC three Phase / 415 V/ Horizontal SPDP 4 Pole Squirrel cage Induction motor for HSC centrifugal pumps -1500RPMSupply and delivery of AC three Phase 4 pole Horizontal squirrel cage Induction motor confiriming to IS 325/1996 and as amended thereafter with Class F insulation to suit the speed of pump and suitable for operation with continous S1 rated, 415V +/- 10 %, 50 HZ +/- 5% supply , TEFC (upto 20 HP), SPDP (above 20 HP). The motor offered should be of energy efficient motors For 30 HP Motor |
| 44 | Supply and delivery of Fully Automatic Auto Transformer Starter suitable for the motor offered. Floor mounting typeair/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IVfor operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%)with the following components etc. under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/ OFF switches, MountedAmmeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc.For 30 HP Motor |
| 45 | Supply and delivery ofDI electric CapacitorKVARwith TNEB test certificate with acceessories confirm to IS 2834 and rate is inclusive of banking charges such as providing of copper bus bars with provision of adding at least 2 capacitors at later date, cable entry box , fabricating chargese The rates are basic rates with inclusive of handling charges 8 KVAR for 30 HP motor |
| 46 | PANEL BOARD Supply and delivery of floor mounting cubical type vermin and dust proof powder coated M.V. panel board made of 14 SWG MS sheet & MS angleironframe work with enclosed 4 Nos of Aluminium bus bar of Electrolyte grade E.91,PVC sleeved of suitable size for phase and netural with hinged front door and railway type lock and key arrangements.The bus bar shall be of ample current carrying capacity with all interal wiring as per IE rules and as per IS 8633 and as per safty requirements of CEIG. The desgin of panel board should facilitate for quick operation of all switches from the front side. The panel board shouldbe completed with all interal wiring including necessarytwin copper earthing arrangements and consists of the componets for controlling incoming and out going supply ; rate inclusive of fabrication charges |
| 47 | Supply and delivery of wall mounted cubical type EB meter Box Up to 50HP/37 KW (which includes LT meter panel board, 6 Nos. suitable fuse carriers |
| 48 | 150mm dia Pressure Gauge and Vaccum guage including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board) |
| 49 | a)supply and delivery of heavy duty 1.1 KV grade 3.5x 95sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in between EB pole - Meter Box - M.V. panel |
| 50 | b) Layingthe above cable as per IE rules inside the pumproom or in air |
| 51 | c)Jointing of the above L.T. cables 3.5 core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS7098 Part I with ISI markingincluding jointing materials lugs,clamps,etc., |
| 52 | a)Supply and delivery of heavy duty 11 KV grade 3.5x50 sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in betweenM.V. panelto ATSstarter for 50HPHSC |
| 53 | b) Layingthe above cable as per IE rules inside the pumproom |
| 54 | c)Jointing of the above L.T. cables 3.5 core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS7098 Part I with ISI marking including jointing materials lugs,clamps,etc., |
| 55 | a)Supply and delivery of heavy duty 11 KV grade 3x 16 sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in from M.V. panelto 45 KVAR capacitor |
| 56 | b) Layingthe above cable as per IE rules inside the pumproom |
| 57 | c)Jointing of the above L.T. cables 3core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc., |
| 58 | Supply, Deliveryand Fixing of the following items for obtaining Service Connection from E.B.Pole.150 mm GI SERVICE PIPE to a length of 3m |
| 59 | 150mm GI bend-3Nos |
| 60 | 150mm GI Coupling-3Nos |
| 61 | Providing pump housewiring and lighting arrangements.Providing pump house lighting wiring using PVC conduit pipes and specials with 2 runs 1.5 sq mm PVC insulated copper wire and 1 run14 SWG TC wire for earthing for lights, 5 Amps plug points includingswitch box 5 Amps switch socket, celing rose and consumable suitable for pump house wiring |
| 62 | Supply and fixing LED INDOOR FITTINGS (LIGHT EMITTING DIODE)24W LED 4000K 2 x 2 Square Type Recessed Fitting |
| 63 | Supply and fixing LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE)30W LED Street Light Fitting |
| 64 | 16 amps.3 pinflush type wall socket only.-3No |
| 65 | Supply and delivery of safety appliances as detailed below Electrical gloves tested to 11 KV /22 KVwith wooden box dusted with french chalk powder -2Nos Electrical quality 6mm thick rubber mat - 6 Nos 5 kg capacity ISI marked Dry chemical powder fire extinguisher - 2 Nno Fire Bucket-3 Nos Hooked to MS stand -1 No Laminated shock treatment chart - 2 NO Wooden First Aid Box -1 no |
| 66 | ProvidingthefollowingtoolsmountedonTeak woodBoardtobefixedonthewall and in a teak wood box Connector Screw Driver 901 Taparia Make or equivalent - 1No 200mm Screw Driver 825 Taparia Make or equivalent -1No 200mm Cutting PlierTaparia Make or equivalent -1No800gm Ball Pane Hammer with HandleTaparia Make-1No DE Spanner set 6 to 32 Jhalani Make or equivalent |
| 67 | Twin CI Earthing as per IS 3043/1987 and I.E. rules including Earth pit (2 pits) with RCC slab and other civil works complete (upto 25 HP) |
| 68 | LabourCharges for erection of Horizontalshaft centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suctionpipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor singlephasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities 30 HP pumpset |
| 69 | Supply and delivery of CI D/F200mm Non returnvalve wafer type ( dual plate check valve) to be used in pump houses confirming to IS |
| 70 | Supply and delivery of CI D/F 200 mm sluice valve with spur gear and hand operation ISI mark reputed make PN 1.6 to be used in pump houses( Long body/long face to face) confirming to IS (12.5) |
| 71 | Supply and delivery of CI D/F 250 mm sluice valve with spur gear and hand operation ISI mark reputed make PN 1.6 to be used in pump houses( Long body/long face to face) confirming to IS |
| 72 | Supply and delivery of CI D/Fsluice valve with cap wheel as pe IS 14846/2000 PN 1.0 with ISI marking . The rates are inclusive of transportation charges, etc.,250 mm sluice valve - for 250mm main |
| 73 | Supply and delivery of CI D/F200mm Non returnvalve wafer type ( dual plate check valve) to be used in pump houses confirming to IS250mm Non return valve - for 250mm main |
| 74 | Supply and delivery of following CI pipe and spls. IS 1538/1993 , IS 7181/1986 & IS 1537/1996 For suction upto 250 mm CI D/F spls |
| 75 | Upto 250mm CI D/F pipe |
| 76 | Delivery pipe Upto 200mm CI D/F spls |
| 77 | upto 250 mm CI D/F spls |
| 78 | Upto 200mm CI D/F pipe |
| 79 | Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to the required specificationwith M.S. bolts and nutscomplete (including cost of jointing materials)200mm |
| 80 | 250mm |
| 81 | Supplyand deliveryofWoltman model with removal mechanism water meters of following sizes with Dirt box confirming toIS 2373 with life cycle test certificate from FCRI/NABl Accredited lab.The water meters shall have magnetic drivers or mechanical drivers and shall beversatile for installation in any position.Themeters shall be hydro dynamiacally ,hydrostaticallybalanced. The runner,runner chamber, pointers of the meter shall be as per ISO 4064 Class B specification.Dry dial excavatedcounter housing fully protected against flooding ensuring easy reading in all climates.**** PAYMENTS ONLY MADE AFTER RECEIPT OF TEST CERTIFICATES FOR THE DELIVERED MATERIAL FULFILL ALL THE TEST PARAMETERS200mmwater meter with dirt box |
| 82 | Erection of water meter including earth work excavation ,labour charges from cutting and threading, convenyance,welding and hire charges for tools and plants etc complete and as directed by the TWAD Board officers.200mmwater meter with dirt box |
| 83 | Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD68) |
| 84 | Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers. Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandy loam and ordinary soil.SS20B (TWAD SOR 2022-2023, Pg 295,296)150mm DI K7 |
| 85 | Supply and delivery offollowing sizes ofDI K7 Class s/s pipes as per IS: 8329 / 2000, at the site of work etc., complete and as directed by Engineer in charge. (TWAD SOR 2022-2023, Pg 46) 150mm |
| 86 | Lowering of D.I Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the Department Officers. (TWAD SOR 2022-2023, Pg 258) 150mm |
| 87 | Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials). (TWAD SOR 2022-2023, Pg 261) 150mm |
| 88 | Cutting the DIpipestrue to axis and finishing the ends complete. (TWAD SOR 2022-2023, Pg 270) 150mm |
| 89 | Supply , delivery and fixing of D.I. specials as per IS 9523/2000 at site etc., complete as directed by Engineer in charge.(TWAD SOR 2022-2023, Pg 52) 150mm D.I. Class K7 |
| 90 | Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus-stand and in the Highways etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by department Board officers. |
| 91 | Barricading work (Where, there is less traffic areas and broader roads etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia and 1.80m height) vertical with horizontal poles in three rows including painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including fixing charges and fixing 75mm dia reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by Department officers. |
| 92 | Supply, delivery to site, fixing & Commisioning of CI sluice valve to pressure rating PN1.0 with ISI mark with 5 Years warranty,for isolation confirming to IS 14846/2000 with necessary rubber insertions, bolts & nutsincluding loading & unloading ,transporting charges taxes & duties etc. complete at site as per standard specification and as directed by engineers of the following sizes. (TWAD SOR 2022-2023, Pg 65) 150mm CI Sluice Valve |
| 93 | Supply, delivery to site, fixing & Commisioning of CI Scour valve to pressure rating PN1.0 with ISI mark with 5 Years warranty,for isolation confirming to IS 14846/2000 with necessary rubber insertions, bolts & nutsincluding loading & unloading ,transporting charges taxes & duties etc. complete at site as per standard specification and as directed by engineers of the following sizes.150mm CI Scour Valve |
| 94 | Supplydelivery to site, fixing & Commisioningof sluice valve PN 1.6 rating with Double orificeAir valves as per IS 14846/2000 specifications including loading and unloading at site, transporting charges taxes and duties etc., as directed by the engineers of the following sizes.50mmDouble Air Valve |
| 95 | Construction of chamber for sluice valve & scour valveusingsecond class chamber bricks in cement mortar 1:4and necessary plastering with cement mortar 1:3 for 12 mmboth inside and outside, precast concrete covers as per drawing , as per IS specifications and as directed by the engineers for the following sizes in metres,as per drawing.(TWAD SOR 2022-2023, Pg 295,296) 1.65m x 1.65m |
| 96 | Refilling the trenches with excavated earth (other than sand) in layers and watering, ramming and consolidation as per standard specification etc complete and as directed by Engineer in charge150mm DI K7 |
| 97 | Disposal of surplus earth including loading, conveyance within a distanceof5 km and spreading as directedbythe Engineer in charge. |
| 98 | Labour charges for cutting of B.T road for laying of mains and as directed byEngineer in charge. |
| 99 | Labour charges for cutting of C.C. road for laying of mains and as directed byEngineer in charge. (TWAD SOR 2022-2023, Pg 299) |
