Military Engineer Services-MES has published Tender For Certain Repair To Flooring Joinery Plumbing And Other Br Repair Works In Tech Area At Af Stn Jodhpur Under Ge (Af) Jodhpur. Submission Date for this Tender is 05-06-2023. Civil Work Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-May-2023 | Revision of BOQ | BOQ | 29-05-2023 |
| 2 | 29-May-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-06-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and disposing of debries outside MD land complete all as specified and as directed. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 3 | Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed by Engr-in- Charge |
| 4 | Dismantling of Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers & cover fillets/frame work complete all as specified and directed. |
| 5 | Taking down cement plaster on block masonaryor concrete surfacesincluding raking out joints,hacking for key,scrubbing down with water etc. all as specified and as directed. |
| 6 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqmeachcomplete all as specified and as directed. |
| 7 | Taking down chowkats or frames with shutter (without taking off shutters from the frame)exceeding 1.5 Sqm not exc.4 sqm eachcomplete all as specified and as directed. |
| 8 | M&L for refixing of chowkhats or frames in the same opening area exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified and as directed. |
| 9 | M&L for post construction Anti Termite Treatment by providing and injecting along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes with cement mortar 1:2 (1 cement : 2 coarse sand) etc in apron complete all as specified & directed. |
| 10 | M&L for post construction Anti Termite Treatment of soil under existing floor using emulsion @ one litreper hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed. |
| 11 | M&L for post construction Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 12 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 14 | S&F for factory made solid PVC moulded flush door shutter, with particle board core WPC 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3 D wood grained moulded PVC sheet front face &back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 15 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printedPVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°) used instead of exposed portion of PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as shown on Sketch for SI-8081 on page 177 of SSR Part-II all as per specification & drawing andspecified andas directed. |
| 16 | S&Fstainless steel barrel tower bolts of 150 mm long complete all as specified and as directed. |
| 17 | S&F stainless steelhandles 150mm long complete all as specified and as directed. |
| 18 | S&Fstainless steel sliding door bolt 300 mm long with hasp, staple bolt type and fixing clips of sheet complete all as specified and as directed. |
| 19 | S&F stainless steel butt hinges of size 100 mm complete all as specified and directed. |
| 20 | S&F anodised aluminium framefor doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 21 | Add extra for powder coating on above item No 20 (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 22 | S&F in repairs 12 mm thick solid PVC ply of 1st quality of both side white colour fixed with necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc complete all as specified and as directed. |
| 23 | S&F in repairs 5.5 mm thick sheet glass ordinary quality in square exc 0.50 Sqm each in each paneincluding rubber beading for fixing of glass complete all as specified and as directed. |
| 24 | S&F in repair butt hinges medium weight cold rolled mild steel of size 75 mm complete all as specified and directed. |
| 25 | S&F in repair butt hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and directed. |
| 26 | S&F in repair for Aluminium anodised barrel tower bolt, of extuded section and fixed of 150 mm long complete all as specified and directed. |
| 27 | S&F in repair for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 28 | S&F in repair for extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed. |
| 29 | S&F in repair 150 mm floor door stopper of aluminium alloy and toung, powder coated, with hard drawn steel spring fixed in floor all as specified and as directed. |
| 30 | S&F in repairs cast iron body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed. |
| 31 | S&F in repair aluminium mortice lock 2 lever vertical type, size 100 mm complete all as specified and directed. |
| 32 | S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty including taking down old one complete all as specified and as directed. |
| 33 | S&F in repair for GI grid frame work for false ceiling ceiling fixed with screw suspended with 6mm dia GI(upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and as directed by Engr-in-Charge |
| 34 | M&L for 12 mm thick perforated particle board/tiles for insulation and accoustic purpose 60x60 cm in size fixed with staples on snap grid incl preparation of surface and applying two coats of oil bound distemper on new or previously untreated surfaces of ceiling in patch work complete all as specified and directed by Engr-in-Charge |
| 35 | S&F for 6 mm thick PVC ceiling board fixed in flat surfaces on snap grid frame workcomplete all as specified and directed. |
| 36 | S&F in repairs 20-25 mm dia stainless steelcurtain rod decorative type design and pattern as approved by GE including both end supports and end finials complete allas specified and directed. |
| 37 | S&F in repair for 18/19 mm thick PVC solid board decorative on one side and plain white on othe side for kitchen cabinet boxes, shutters etc. with shelf and shutters full size fitted under /above kitchen cooking platform and other platform complete all as direction of the Engr-in-Charge and all as per the manufacturers specifications and drawings. |
| 38 | S&F in repair hasp and staple 150 mm long, safety type, stainless steel including bolt to hinge plate and fixed with screws all as specified and directed. |
| 39 | S&F in repair continuous (piano) hinges width of flap 30 mm (when open) mild steel, bright finish or electrogalvanised all as specified and directed. |
| 40 | S&F in repairs stainless steelhandles 75 mm long complete all as specified and as directed by Engr-in-Charge . |
| 41 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified |
| 42 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290 Gde E-165 including dismantling old iron work complete all as specified and as directed by Engr-in-Charge. |
| 43 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 Gde E-165 including dismatling of existing iron work complete all as specified and as directed by Engr-in-Charge. |
| 44 | S&F in repairs for 1.25 mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. |
| 45 | M&L for precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6including demolition of old block masonry complete all as specified and directed. |
| 46 | Demolition of cement concrete (reinforced) in any position of any descriptionand disposing of debries outside MD land complete all as specified and as directed. |
| 47 | M&L for precast cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) set in CM 1:6 in landings,chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 48 | M&L for mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed. |
| 49 | S&F in repairs CP Bib taps fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 50 | S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 51 | S&F in repairs Vitreous China wash hand basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and as directed. |
| 52 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap complete all as specified and as directed. |
| 53 | S&F in repairs Vitreous China squatting pan of orissa pattern size 580mm x 440 mm white with "P" or "S" trap, front or back inlet & integrated foot rests, including provision of cement concrete bedding complete all as specified and as directed. |
| 54 | S&F in repair for Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 55 | S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed. |
| 56 | S&F in repair Stop valves/angle valve 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 57 | S&F in repair 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms]. |
| 58 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed. |
| 59 | S&F in repair Vitreous china urinal, half stall type, white, completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement,with grating and union for discharge pipe and PVC waste pipe, including making all connection to existing connections, fixed complete all as specified and as directed. |
| 60 | S&F in repair for brass chromium plated urinal water spreader fancy type of approved quality fixing with 15 mm dia pipe complete all as specified and directed. |
| 61 | S&Fin repair for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter lomg flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified and directed. |
| 62 | S&F in repair for Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed |
| 63 | M&L for 15 mm bore GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 64 | M&L for 20 mm bore GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and directed. |
| 65 | Supplying and fixingof CPVC pipes 16 mm dia (outer dia) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old CPVC pipe complete all as specified and directed. |
| 66 | S&F in repair for 32 mmbore waste fittings brass chromium plated for glazed ware sink, basin etc with long screwed shank and fly nut , flange and bedded in red lead cement and other end fixed including waste pipe of required length complete all as specified and as directed. |
| 67 | M&L in repairs 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and as directed. |
| 68 | S&F rotational moulded polyethylene water storage tank of capacity 500 ltrs (Cylindrical vertical with closed top), ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia and Ball valve of 20 mm borehigh pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) including dismantling/taking out of old water tank of having capacity of etc 250 Ltr but not exc 500 Ltr & removing from site etc complete all as specified and as directed. |
| 69 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors complete all as specified and as directed. |
| 70 | S&F coloured Non Skid ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 71 | M&L for Vitrified light shade coloured tiles 10 mm thick (squares/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqmas in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and includingscreed bed or bedding layer 15 mm thick in CM1:6 complete all as specifed and directed. |
| 72 | M&L for Vitrified light shade coloured tiles 10 mm thick (squares/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqmas in skirtingetc.set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed. |
| 73 | M&L forglazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 300 x 7mm/ 300x600x 7 mm thick laid over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed. |
| 74 | M & L for renewing glazed tiles in patches, area n.exc 5.00 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing newtiles to match the existing tiles in cement mortar complete all as specified and as directed. |
| 75 | M&L for 2.0 mm thick PVC tiles/ sheets, laminated plain coloured, homogeneous finish, laid with approved rubber based adhesive in floors including removing of old sheets complete all as specified and directed. |
| 76 | M&L for 75 mm thick plain cement concrete PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protectionlaid in pannels including necessary form work,finishedeven and smooth without using extra cement complete all as specified and directed. |
| 77 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, treads/risers, jambs, pillars, window-cills, cooking platforms including chamfered in exposed edges and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admxture of pigment to match with shade of granite complete all as specified and directed. |
| 78 | M&L for Solar control film 50 micron reflectiveblack/coloured designer type sticked to glass panesas per instructions of manufacturers complete all as specified and directed. |
| 79 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed layer of 15 mm thick in CM 1:4 complete all as specified and as directed. |
| 80 | M&L for Kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid over cement screed and jointedincluding 10 mm thick rendering in cement mortar 1:4 as in backing coat complete all as specified and directed. |
| 81 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish including joint filling with white cement complete all as specified and directed. |
| 82 | M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed. |
| 83 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint over and including a coat of red oxide primer all as specified and as directed. |
| 84 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paintpaintover and including a coat ofalkali resistant primer complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
