Improvement Of Road Fromnh-353 B (Chennai Ku) Todhanakdevi Roadtr-05 Odr-139At Ch 0/000 To 10/050, (Proposed 10.050 Km),Taluka - Korpana District:-Chandrapur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 May 2023
0 days left
EMD
3.48 Lakhs
Bank guarantee accepted
Document Fee
17700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
korpana → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement of Road fromNH-353 B (Chennai Ku) toDhanakdevi RoadTR-05 ODR-139at CH 0/000 To 10/050, (proposed 10.050 km),Taluka - Korpana District:-Chandrapur
BOQ
| Sl. No. | Item Description |
| 1 | Name of Work :- Upgradation/Improvement and five year routine maintenanceof Road from NH 353 B Chanai (Kh) to Dhankdevi Taluka Border in Koparna Taluka of District Chandrapur (Section0/00 To 10/050) |
| 2 | Bill No. 1 Site Clearance, Dismantling and Earth Works |
| 3 | Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MORD Technical Specification Clause 201. |
| 4 | Dismantling of flexible pavements and disposal of dismantled materials with all lead & lift, stacking serviceable and unserviceable materials separately as per MORD Technical Specification Clause 202 |
| 5 | Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lead & liftas per MORD Technical Specification Clause 302.3 |
| 6 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacting with vibratory roller to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification Clause 301.5 |
| 7 | Construction of embankment with approved material obtained from borrow pits with all lead & lift , transporting to site, spreading , grading to required slope and compacting with vibratory roller to meet requirement of Tables 300.1 and 300.2with all lead & liftas per MORD Technical Specification Clause 301.5 |
| 8 | Bill No. 2 Pavement Works (GSB, WBM, Bituminous Works) and Cement Concrete Pavement Work |
| 9 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with vibratorywheelroller to achieve thedesired density, complete.(GSB Grading -2) as per MORD Technical Specification Clause 401. |
| 10 | Water Bound Macadamwith crushable screening) Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming,crushable screeningto fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per MORD Technical Specification Clause 405. |
| 11 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with all lead as per MORD Technical Specification Clause 303. |
| 12 | Construction of 50 mm Thick Modified penetration Macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 KN static roller to acheive the desired degree of compaction as per M.O.R.D.(2004) Specification Clause 506. |
| 13 | Providing and applying tack coat on the prepared surface heating by flames in Boiler and spraying bitumen with sprayer on Granular surface treated with primer @ 2.75 kg/10 sqm(VG-30 bulk bitumen rates are considered to arrive at rates)MORTH Technical Specification clause503. |
| 14 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level by paver finisher to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type B as per MORD Technical Specification Clause 506. |
| 15 | Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B , as per MORD Technical Specification Clause 508 |
| 16 | Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork(steel channel,edges,steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant,admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawingand MORD Technical Specification Clause 1501(excluding dowel bars and polythene sheet) |
| 17 | Bill No. 3 Cross Drainage Structures (Culverts & Minor Bridges), Drains and Protection Works |
| 18 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and leadas per MORD Technical Specification Clause 202. |
| 19 | Removing all types of Hume pipes and stacking with all lead including Earthwork and Dismantalling of Masnory Works as per MORD Technical Specification Clause 202ABOVE 900 mm |
| 20 | Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material MORD Technical Specification Clause 1101.4And 305 |
| 21 | Providing rubble filling in foundation trenches as per drawing & MORD Technical SpecificationClause 305.3.9 |
| 22 | Providing concrete for plain cement concrete M-10in open foundations complete as per drawings and MORD Technical Specification Clauses From 801 To 816 |
| 23 | Plain/reinforced cement concrete Grade M-15 in substructure complete as per drawings and MORD technical specifications ClauseFrom 801 To 816 |
| 24 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets As per MORD Technical Specification Clause 1101. 1000MM Ø C.D. WORK |
| 25 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per. MORD Technical SpecificationClause 1101.600 MM Ø |
| 26 | Providing and laying cement concrete wearing course M-30 grade excluding reinforcement complete as per drawingMORD Technical Specification Clause1404 . |
| 27 | Expansion joint with 25 mm thich bitumenous pad / Compressible Rubber Pad . MORD Technical Specification Clause 1403. |
| 28 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MORD technical specification Clauses 614,1206.6 . |
| 29 | Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material MORD Technical Specification Clause 1101.4And 305 II) Ordinary Rock (Not Requiring Blasting) |
| 30 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)AS DIRECTED BY ENGINEER. IN CHARGE |
| 31 | Plain/reinforced cement concrete Grade M-15 in substructure complete as per drawings and MORD technical specifications ClauseFrom 801 To 816 |
| 32 | Filling annular space around footing in rock as per MORD technical specifications Clause No.1203.4.3. |
| 33 | Providing & Placing concrete for Plain/reinforcedcement concreteM-25in substructure complete as per drawings MORD technical specifications ClauseFrom 801 To 816 .Cutoff-9235 |
| 34 | Providing & Placing concrete for Plain/reinforcedcement concreteM-30in substructure complete as per drawings MORD technical specifications ClauseFrom 801 To 816 .Cutoff-9445 |
| 35 | Plain/reinforcedcement concreteM-20 (Nominal Mix 1:1.5:3) in substructure complete as per drawingsMORD Technical Specification Clause 801 and 816 |
| 36 | Providing & Placing concrete for Plain/reinforcedcement concreteM-25in substructure complete as per drawings MORD technical specifications ClauseFrom 801 To 816 . CAP |
| 37 | Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings MORD technical specifications clause 1000 |
| 38 | Supplying, fitting, and placing TMT bar reinforcementin superstructure complete as per drawing MORD technical specifications clause 1000 |
| 39 | Sand filling in foundation trenches as per drawingMORD Technical Specification Clause 1205.11 |
| 40 | Providing & Placing concrete for Plain/reinforcedcement concreteM-30in substructure complete as per drawings MORD technical specifications ClauseFrom 801 To 816 Vertical wall 9445 |
| 41 | Providing and laying of apron with cement concrete blocks of size as per Table 1300.1 cast-in-situ and made with nominal mix of M-15 grade cement concrete as per MORD technical specifications clause1301Appron 9445 |
| 42 | Providing and laying reinforced cement concrete M-30in superstructure as per drawing MORD technical specifications ClauseFrom 801 To 816 . Slab 9445 |
| 43 | Providing pressure relief pipes 100 mm dia in bottom slab of box cell on a filter media base of 500 mm x 500 mm as per drawingMORD Technical Specification 2004 Clause 1205.5.7 . |
| 44 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smallersize towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawingMORD Technical Specification Clause 1302.3. |
| 45 | Backfilling behind abutment, wing wall and return wall complete as per drawings MORD Technical Specification Clause1204.3.8 |
| 46 | Providing and laying 0.90meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete.PWD Red book specification clause BR 62And AS DIRECTED BY ENGINEER. IN CHARGE |
| 47 | Providing and laying of apron with cement concrete blocks of size as per Table 1300.1 cast-in-situ and made with nominal mix of M-15 grade cement concrete as per MORD technical specifications clause1301 |
| 48 | Providing and laying reinforced cement concrete M-25in superstructure as per drawingMORD Technical Specification Clause 801 and 816. |
| 49 | Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and MORD technical specifications Clauses 1001 |
| 50 | Providing and fixing in position pipe railing consisting of IS Rolled steel joist posts designation ISMB 100 (100x50) at 2.5 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawingMORD Technical Specification Clause 1706 |
| 51 | Providing Tar paper bearing of approved quality in proper size etc. complete AS DIRECTED BY ENGINEER. IN CHARGE |
| 52 | Expansion joint with 25 mm thich bitumenous pad / Compressible Rubber Pad . MORD Technical Specification Clause 1403. |
| 53 | Providing and fixing granite/ marble table of 15 mm to 18 mm thickness, including making goorve in wall / concrete surface filling joints with slurry, curing polishing, rounding edges, as required cleaning etc. complete of size and description as per detailed drawings including embossing and fitting in CM 1:2 border. AS DIRECTED BY ENGINEER. IN CHARGE |
| 54 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and leadas per MORD Technical Specification Clause 202.(I) Manual Means (C) Reinforced Cement Concrete |
| 55 | Removing all types of Hume pipes and stacking with all lead including Earthwork and Dismantalling of Masnory Works as per MORD Technical Specification Clause 202ABOVE 900 mm |
| 56 | Bill No. 4 Traffic Signs, Markings and Road Appurtenances, Road Safety & Road Furniture |
| 57 | Reinforced cement concrete M-15 grade 5th KM Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing andMORD Technical Specification Clause 1703. |
| 58 | Reinforced cement concrete M-15 gradeKilometer Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing andMORD Technical Specification Clause 1703. |
| 59 | Reinforced cement concrete M-15 grade 200m Stoneof standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing andMORD Technical Specification Clause 1703. |
| 60 | Reinforced cement concrete M-15 grade Boundary Pillar/ Local Stone of standard design as per IRC: 25, fixed in position including finishing and lettering but excluding painting as per drawing andMORD Technical Specification Clause 1704. |
| 61 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing MMGSY SIGN BOARD as per M.O.R.D. Specification Clause 1701 |
| 62 | Providing and fixing Semi reflective Cautionery, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads of required shade and colour supported and welded on 47mm *47mm *12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450*450*600mm, 600mm below ground level as per approved drawing as per M.O.R.D. Specification Clause 1701800 mm x 600 mm rectangular |
| 63 | Providing and fixing Semi reflective Cautionery, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads of required shade and colour supported and welded on 47mm *47mm *12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450*450*600mm, 600mm below ground level as per M.O.R.D. Specification Clause 1701600 mm equilateral and Triangle |
| 64 | MMGSY Citizen\" s information Board- Providing and fixing of typicalMMGSY Retro Reflective information board as peras per section1700 of MORD specifications and latest MMGSY Signage Manual / Circuler and drawing.Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottomduly rivetted with MSangles of 35 x 35x 5 mm thick M.S angle shall be welded by two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes / 75mm Dia Pipe posts duly embedded in cement concrete M-20 grade blocks of 600mm x 600mm x 75mm, below ground level. MMGSY / MMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circuler no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing MMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). The design, painting and lettering shall be done as per the MMGSY Signage Guidelines Fig.3 and Fig.4 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.MORD Technical Specification Clause 1701.2.5 |
| 65 | Providing and fixing Retro Reflective MMGSY LOGO informatory sign board with Logo as per section1700 of MORD specifications and latest MMGSY Signage Manual / Circuler and drawing. The board will be a composite unit consisting of TwoPlates of ACP (Aluminum Composite Panel), material specifications as per clause 17001.3. The top most plate will be of 3mm ACP in diamond shape of 600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The Lower plate will be of 4mm ACP of 1100x300mm size riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. Riveting of all the sheets over angle and flat iron frame will be done neatly to have plain surface on one side. The angle iron frame of Both the plateswill be welded to a 75mm x75mmx 12swg Mild steel post at / Tube Centre and this post will be embeded in cement concrete M15 grade block of 450x450x600mm below ground level. The height of the bottom of the lower plate will be 1200mm from normal ground level. The spacing between the diamond shaped plate and Lower Plate is kept 150mm. MMGSY / MMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circuler no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing MMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors.”All the section of the frame and posts shall be painted with primer and two coats of epoxy paint. The design, painting and lettering shall be done as per the MMGSY signage manual Fig.1 (A) and Fig.1 (B) and as directed by Engineer in-charge. A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor. MORD Technical Specification Clause1701.2.5. |
| 66 | Painting lines, dashes, arrows etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as perMORD Technical Specification Clause 1702. |
| 67 | STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides.The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof.As per MORTH Technical specification Clause 806 |
| 68 | Supplying & Fixing of Molded Shank Raised Pavement Markers / Cat\"s Eyemade of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warrantyfor satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.MORTH Circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. |
| 69 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete AS DIRECTED BY ENGINEER. IN CHARGE |
| 70 | Providing railing of mild steel angle post 2.0m center to center of section 75mm x 75mm x 10mm or equivalent I/C section of height 1.05 above bridge surface with minimum anchor length of 30cm including hold fast of 25mm diameter MS bar welded at the bottom and concreting of 1:3:6 of size 30cm x 30cm x 30cm with three rows of 40mm B class GI pipe provided at 30cm on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etc. complete.AS DIRECTED BY ENGINEER. IN CHARGE |
AI Tender Summary
Tender Timeline
May 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender