Urban Improvement Trust-UIT has published Tender For Electrical Panel Room, Pedustal Stone Work, Down Stream Steps And Other Misc. Work At Barrage Garden Kota. Submission Date for this Tender is 18-05-2023. Electrical Panel Tenders in kota Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 2 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix |
| 3 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix |
| 4 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 5 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : |
| 6 | Walls (any thickness) including attached pilasters, buttresses plinth and string course. |
| 7 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 8 | Columns, pillars, posts and struts etc. |
| 9 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ("Original producers" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) |
| 10 | Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 11 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks |
| 12 | Cement Mortar 1:4 ( 1-Cement : 4-Sand). |
| 13 | Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Good soil of earth |
| 14 | Preparation of mounds of various size and shape by available excavated/surplus/earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc.lead upto 50 meters and lift upto 1.5 m as per direction of officers in charge. |
| 15 | Providing and fixing of overhead impact sprinkler full/part circle having radius of throw 11.3m - 13.7m & flow of 0.13 0.52 ltr/sec at an operative pressure of 2.5-4.0 kg/cm.sq. The sprinkler is impact driven rotary type having 3/4" bottom inlet. The sprinkler shall be having double weighted arm for slower rotation and increased distance of threw, self flushing inner trip, adjustable arm spring for low pressure operation, hooded bearing, distance controller deffuser pin. The body of sprinkler is of noncorrodible, heavy duty, ABS plastic. The sprinkler shall accept seven inter chargeble, color- coded nozzles. A 3/4" ASTM Raiser (6" long) with sadsle Tee is use to connect the pop up to pipeline. The body of saddle is made of vergin polypropylence in master batch UV stablised, reinforcement O-rings made of Delrin, galvanized nut & bolts and parallel female thread (Pressure tight) |
| 16 | Providing and fixing of self closing spring loaded quick coupling 3/4" hydrant (Drip"n"Drip /Whethermetic/ Premier); made of Aluminium alloy doly procted ints main parts by brass stainless steel and techno polymors & having self closing thermoplastic hinged lid, anti rotating device and with requirew no. of 3/4" key for quick coupling hydrant made up of Aluminium alloy ;doly procted. An electro galvanized MS saddle with 3/4" G.I Riser with galvanized nut & bolts and parallel female thread (pressure tight) shall be used to connect the quick coupling hydrant to the pipeline. |
| 17 | Providing and fixing of self closing spring loded quick coupling 1 1/2" hydrant ( Drip`n `Drip/ whethermetic/premier); made of Aluminium alloy doly procted ints main parts by brass stainless steel and techno polymors & having self closing thermoplasic hinged lid for Gear driven rain gun sprinkler |
| 18 | Providing & Fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings |
| 19 | 50 mm OD4 kg/ cm2 |
| 20 | 63 mm OD4 kg/ cm2 |
| 21 | 75 mm OD4 kg/ cm2 |
| 22 | Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long |
| 23 | Single piece of stone element with carving work in Bansi Paharpur stone includes stone pillar, stone base, todies and thabi etc carving work as per direction of engineer in charge |
| 24 | Providing and Fixing Dholpur White / Mandana stone/ Gwalior mint stone base with white cement & Tinex chamical,& SS Clamp and Fastners (of approved brand) inclusive of moulding,carving, rubbing, polishing complet,laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attachedwith hairline joint at transition including rubbing, polishing and finishing, complete in all respect as per direction of Enginner & Architect with all lead & lift. The Stone measurement will be done of outer most dimension. |
| 25 | Supplying and fixing at site, single piece solid stone element/statue/sculpture made out by carving work in first class (Superior class) BANSWARA-WHITE Marble stone free from cracks, flaws & stains etc. with additional/required carving work (3-dimensional work) on stone element including Planning, developing, making base, carving work, polishing, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P (including white cement, pigment, Chemical, SS clamps and fasteners of approved brand etc.), fixing over/on base/surface as per shape-size & placement of approved drawing , finishing, surface treatment etc. coveringproperly till the date of opening/inauguration of site etc. The stone should be pre/post -treated with suitable chemical polish for maintaining original color and Ceramic surface treatment to be doneto avoid surface staining & effect of external weather condition, pollution & dust etc. Proto type model of element/statue/sculpture (fiber glass or plaster of Paris) may also be required of same shape, size and detailing, for which nothing be paid extra. Preferably, the single piece stone block shall be used for the particular element/statue/sculpture but if not possible, material from the same block/lot of stone, shall only be used for similarity & fine n hair line pasting/jointing shall be done with suitable material in such a way so that joint(s) be not visible from front site. Complete job in all respect including in-lay work if required, as per approved design & drawing under approval of project consultant, appointed for the project & as per directions of Engineer-In-Charge complete in all respect. All work upto 5.0 mtr height from plinth level |
| 26 | (Theme, concept plan, schematic arrangement, other relevant details and drawings of element/statue/sculpture are enclosed. The final drawing shall be provided after award of the work.) |
| 27 | Note: Payment shall be made as per cubical block size of largest O/O dimension of a finished (part/full) product in each direction from which the element/statue/sculpture etc. is prepared. Other masonry, concreting, steel reinforcement plastering etc. required shall be paid extra but metallic items such as copper/bronze/gunmetal pipes, nozzles etc of approved make etc., conduiting for water pipe line, electric line etc. or hole of desired shape n size, requiredfor fixing/installation or structurally etc. in any element shall be inclusive in the rate, assuming 1CFT=80 Kg. |
| 28 | Supplying and fixing at site, Bronze Metal Alloy (88% Copper, 8% Tin and 4% Zinc) sculpture including Planning, developing, casting, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P, fixing over/on base/surface as per shape -size & placement at all heights as per approved drawing, finishing, surface treatment etc. coveringproperly till the date of opening/inauguration of site etc. Modelling, 3D scanning of model Robotic machining (enlargement of model to desired height), assembling and final detailing, Piece moulding, Wax casting (Lost wax process), Wax chasing, sprung Investing, metal casting, Divesting, metal chasing, Brazing/Welding Finishing and Patina/Colour etc. Complete job in all respect as per approved design & drawing under approval of project consultant, appointed for the project & as per directions of Engineer-In-Charge complete in all respect. (Theme, concept plan, schematic arrangement, other relevant details and drawings of element/statue/sculpture are enclosed. The final drawing shall be provided after award of the work.) |
| 29 | Note: Payment shall be made per kg of the finished sculpture (final payment shall be paid after test result of composition-If variation in composition of alloy metal observed the rate shall be paid accordingly). Other masonry, concreting, steel reinforcement plastering etc. required shall be paid extra but additional support if required for bronze metal alloy sculpture, shall be of Stainless steel/ zinc coated iron steel etc. for which nothing shall be paid extra.) |
| 30 | Providing and fixing BISAZZA Glass Mosaic tiles ( hand made ) confiming to ISO 10545 part 3,9,12,13 & DIN 51097, ANSI A 137.2 2012 of size 20mm x 20 mm x 4 mm thick duly pasted on craft paper sheet of size 322 mm x 3222 mm and joint gap 1.57 mm in approved colour and design pattern and as per architectural drawings for Dome surface aea over smooth levelled dry and hard cement plastered surface with 2 mm thick bed of white BISAZZA ADHOC ADHESIVE WITH NOTCH TRowel removing of paper and grouting with specified fillgel plus UVR colour coordinated epoxy grout as per manufacturers specification & direction of Architect incharge |
| 31 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
