|
| 1 | Providing and fitting fixing of 10000 GPH x 76 mtrs. Head water lubricated submersible pump of maximum 150 mm outer dia. With maximun 10(Ten) stages coupled with required water and non-cover loading submersible motor suitable for 340-440 volts, phase 50Hz, AC supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less PVC 3 (three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, Suction case, strainer, coupling key, vertical non return valve cum discharge case including supplying of 10 Nos. suitable cable guard with clips and nuts & bolts, 2 (two) pair M.S. column clamps as per direction of Engineer-in-charge conforming to terms & conditions of the contract Each pump with motor shall consists of stainless stell closed type impeller, C.I. bowl, C.I discharge case, pump shaft (styainless steel), bush (bronze), shaft sleeve (bronze/ chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes.) |
| 2 | Providing and fitting fixing steel sheet enclosed switch fuse unit(suitable for DIN fuses), triple pole with Neutral Link (TPN),415/500 Volt, L & T / Havells / BCH make etc. completeas per specification and direction of the Engineer-in-charge. |
| 3 | i) 32 Amps |
| 4 | ii) 63 Amps |
| 5 | iii) 100 Amps |
| 6 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. |
| 7 | i. 25 HP/18.5 kw Relay range within 13-21 + 10% |
| 8 | ii. 35 HP/26 kw Relay range within 20-32 + 10% |
| 9 | iii) 50 HP/37 kw Relay range within 28-42 + 10% |
| 10 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. |
| 11 | i) 10 Sqmm |
| 12 | ii) 16 Sqmm |
| 13 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. |
| 14 | i) 4 Sqmm |
| 15 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. |
| 16 | i) 25-32 Amps |
| 17 | ii) 32-40 Amps |
| 18 | Providing and fitting fixing3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder completeas per specification and direction of the Engineer-in-charge. |
| 19 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. completeas per specification and direction of the Engineer-in-charge. |
| 20 | i) 5-15 kVAr 440 V |
| 21 | Providing & fitting fixing 3pole power contactor type ML of AC-3 rating 25 & AC-1 rating 25 Aux. contact 2 no +2NC cat no.SS 91851 suitable for ML 1.5 FASD L&T make starter as per direction of the Eng-in-charge. |
| 22 | Providing & fitting fixing 4pole power contactor type ML1 of AC-3 rating (A)11A cat no.SS 95200 of standard coil voltage 440, 50Hz of L&T make starter as per direction of the Eng-in-charge. |
| 23 | Providing & fitting fixing of spare kit without coil suitable for L&T make starter as per direction of the Eng-in-charge. |
| 24 | i. For ML 1.5 FASD starter contactor (cat no-SS 95305) |
| 25 | ii. For ML 2 FASD starter contactor (cat no-SS 95307) |
| 26 | iii. For MNX 25 starter contactor (cat no-CS 94127) |
| 27 | Providing & fitting fixing of spare coil suitable for L&T make motor startercontactor as per direction of the Eng-in-charge. |
| 28 | i. For ML 1.5 FASD starter contactor (cat no-SS 90873) |
| 29 | ii. For ML 2 FASD starter contactor (cat no-SS 90545) |
| 30 | iii. For MNX 25 starter contactor (cat no-CS 94105) |
| 31 | Providing & fitting fixing bimetal over load relay type ML/MN of L&T make as per direction of the Eng-in-charge. |
| 32 | i. For ML0/ML1/ML1.5 type L&T make starter (cat no-SS 185800VO/9185800BO) |
| 33 | ii. For ML 2 FASD starter contactor (cat no-SS9185900EO) |
| 34 | iii. For MNX 32 type L&T make starter(cat no-SS 9414400BO) |
| 35 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inchx 9 feet), nuts & bolts etc. for irrection of the same by1:1.5:3 cement concrete casting (1 feet x 1 feet x 2 feet) below the ground level and paintingtwo ormore coats & plastic paint as per specification and direction of the Engineer-in-charge. |