Military Engineer Services-MES has published Tender For Repair To Flooring, Plastering, Sanitary Fittings, Joinery And Other Misc Work At Biilets Area Under Aor Of Ge (Af) Srinagar.. Submission Date for this Tender is 02-06-2023. Civil Work Tenders in srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-May-2023 | BOQ Corrigendum and revised tender condition | BOQ | 02-06-2023 |
| 2 | 22-May-2023 | Date | Date | 02-06-2023 |
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm and credited to the contractor all as specified and directed by Engineer-in-Charge Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 2 | Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n exc 4 Sqm each and credited to the contractor all as specified and directed by Engineer-in-Charge Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 3 | Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 sqm and removing from site complete all as specified and directed. |
| 4 | S&F 125x60mm size ofpressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (40x3mm) etc. complete size /profile of frame as per IS complete all as specified and as directed by the Engineer-in-Charge |
| 5 | S&F 105x60mm size ofpressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (40x3mm) etc. complete size /profile of frame as per IScomplete all as specified and as directed by the Engineer-in-Charge |
| 6 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frame etc complete all as specified and directed. |
| 7 | M& L for Box type steel window double frame (glazed & gauged) made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed Skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with two Nos openable leaf consisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertical mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire guage/glass including fixture and fitting like as handle, tower bolt stopper , cleat, pintal hinges, holdfastprimer etc, complete all as specified and directed.(Note- sheet glass, wire mess,10mm Sqr Bar security grill will be measured and paid separately and window will be measured one side only) |
| 8 | All as per Item No 07 above but Box type steel Ventilators double shutters (glazed & gauged). |
| 9 | S & F for Factory made 35 mm thickGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, in second class hardwood, complete all as specified and directed by Engineer-in-Charge |
| 10 | S & F forFactory made 35mm thickPlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated in second class hardwood, complete all as specified and directed by Engineer-in-Charge |
| 11 | Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed. |
| 12 | Material and labour for applying one coat of synthetic enamal paint onsteel surface of any description over 10cm widht or girthincluding preparation of old painted surfaces complete all as specified and as directed. |
| 13 | Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed. |
| 14 | S & F in repair 18 mm thick plywood,grage BWR, type BB, fixed wih screws to timber frame woork, asin kitchen drawers, cupboard shutters etc |
| 15 | S & F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions |
| 16 | S & F 30mm width of flaps Continuous (piano) hinges, Stainless steel, bright finish or electrogalvanised, Complete all as specified and directed by Engineer-in-Charge |
| 17 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as specified and directed. |
| 18 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet fore tip rail, lock rail & bottom rail on either side and as gap insert fir top rail, lock on either side and as gap insert fir tip rail & bottom raill, paneling of plain colour PVC sheet to be filled in MS frame welded/sealed to the stiles and rails with suitable PVC shet beading and jointing together with solvent cement, supplying & fixing of frame at site all as directed. |
| 19 | S & F for Aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge. |
| 20 | S & F for 150 mm long Aluminium anodised,handle of extruded section fabricated type anodised and fixed complete all as specified and directed. |
| 21 | S & F for Aluminium, anodised, barrel tower bolts 150mm size of extruded section, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply & Fix 125 mm long Aluminium anodised,handle of extruded section fabricated type anodised and fixed complete all as specified and directed. |
| 23 | S&F for Aluminium, anodised, barrel tower bolts 125mm size of extruded section, complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F Butt hinges, medium weight, cold rolled mild steel 100mm size, complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F Floor door stopper of aluminium alloy body 140mm cover plate and tounge, anodised with harde drawn steel spring fixed in floor, complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws, complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S& F powder coated of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sashbars/ Sliding windows, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 29 | S & Fsheet glass 4mm thick, ordinary quality and glazing with oil putty, wooden beads and aluminium beading in square or rectangular in section n exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge. |
| 30 | S & F Stainless steel wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 31 | S & FFigured Glass pin head type 4mm thick n exc 0.5 Sqm and glazing with oil putty,Complete all as specified and directed by Engineer-in-Charge |
| 32 | Supply and fixing forframed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 33 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover filletscomplete all as specified and directed by Engineer-in-Charge. |
| 34 | M & L forAnodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specifiedcomplete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for 06 mm thick Non asbestos fibre cement building boards one side aluminium foil coated fixed or laid/ inserted to aluminium frame work with screws including taking down complete all as specified. |
| 36 | S&F in repair , 6 mm thick Plywood, grade BWR, type BB, fixed with nails or screws to timber frame work, complete all as specified and as direted by the Engr-in-Charge. |
| 37 | S & F for Wooden planks of second class hard wood, 20mm thick, planed one side and edges tongued and grooved or rebated fixed, inrepairs to replace old and or decayedboarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed by Engineer-in-Charge. |
| 38 | S & F in repair 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws putty to receive finishes complete all as specified and directed by Engineer-in-Charge. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed. |
| 40 | S&F rolled mild steel section as inmain and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A). |
| 41 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge |
| 42 | S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixedwithcoach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or crankedhook bolts in lieu of screws, complete all as specified and directed by Engineer-in-Charge. |
| 43 | All as per item No 42 but except Sheets Note : Old sheets obtained from item No 41 will be used. |
| 44 | S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 |
| 45 | M & L for tightening bolts and closing bolt holes, etc.to rectify the leakage/ seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead Complete all as specified and directed by Engineer-in-Charge. |
| 46 | M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paintof any description over 10cm width or girth in Camouflaging CCD pattern as approved complete all as specified and directed by Engineer-in-Charge |
| 47 | S & F in repair mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete 300mm length, complete all as specified and directed by Engineer-in-Charge |
| 48 | Demolition of reinforced cement concreteof any description in any position not otherwise specifically provided for, Complete all as specified and directed by Engineer-in-Charge |
| 49 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface; not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed by Engineer-in-Charge. |
| 50 | M & L for RCC, Type B1 1:2:4 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engineer-in-Charge. |
| 51 | MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge. |
| 52 | S & F Hasp & Staple, 125 size, safety type aluminium anodised with mild steel hinge pin including bolt, to hinge plate and fixed with screws,complete all as specified and directed by Engineer-in-Charge. |
| 53 | S & F in repair drapory rod 25mm dia fency type mild steel plastic coated inculdingwooden funnel and wooden brackets, Complete all as specified and directed by Engineer-in-Charge. |
| 54 | Demolition of Stone slabs and tiles of any description or thickness in floors aprons etc laid in cement mortar of any thicknes, complete all as specified and directed by Engineer-in-Charge |
| 55 | M & L forgranite (of any type) work (table rubbed and polished) 20mm thick as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cm 1:4,complete all as specified and directed by Engineer-in-Charge |
| 56 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L for non skid coloured ceramic colour tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm in floor etcset & jointed in neat cement slurry & pointed in white or coloured cement to match the tilesoverincluding screed bed15mm thickin cement mortar (1:4) for laying floor finished completeall as specified and directed by Engineer-in-Charge |
| 58 | M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick Screed bed or bedding layer of mortarfor laying floor finishes in CM 1:6 |
| 59 | M&L Coloured Glazed ceramic tiles in vertical surface 6000x300 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat. |
| 60 | Material and labour for any coloured Vetrifiedtiles size 600 x 600mm x 9mm thick as in floors set and jointed in neat cement slurry over and including 15 mm thick screed bed in cement mortor 1:6and pointed in coloured cement to match the colour of tiles complete all as specified and directed |
| 61 | Material and labour for any coloured any Vetrified tiles size 600 x 600mm x 9mm thick as on vertical surfaces, such as skirting/dado set and jointed in neat cement slurry and pointed in coloured cement tomatch colour of tiles over and incl 10 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 62 | M&L formachine cut kota stone slab flooring 20-25 mm thick over screed bed or bedding layer 20 mm thickin CM1:6, and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete. |
| 63 | M&LKota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 13014 including backing coat 10mm thick in CM 1:4 . |
| 64 | Material and labour grinding and polishing of existingof Kota stone/tarrazo tiles flooring polished upto mirror finish complete all as specified and directed |
| 65 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. Complete all as specified and directed by Engineer-in-Charge. |
| 66 | M & L for brick work with sub-class `B" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6,Complete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for brick work with sub-class `B" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 Complete all as specified and directed by Engineer-in-Charge. |
| 68 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge. |
| 69 | M & L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 70 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 71 | M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 72 | M&L for preparing new plastered surfaces andapplying two coats of distemper oil emulsion including Thin layer (1mm thick) of wall care putty and priming coat preparatory to distempering on surfaces of wall, , complete all as specified and directed by Engineer-in-Charge. |
| 73 | M & L for preparing of new surface of plaster and applying three coats of white wash on ceiling. |
| 74 | M&L Preparing of new surface of wall and applying twocoatsof cement base paint over one coat of primer. |
| 75 | Taking up or down steel water tubing 15mm bore and connection complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F 15 mm bore tubes, "medium grade", galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified. |
| 77 | Taking up or down steel water tubing and connection complete 20 mm bore complete all as specified and directed by Engineer-in-Charge |
| 78 | S&F 20 mm bore tubes, "medium grade", galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified. |
| 79 | Refixing old GI tubing and connections, 20 mm dia,in old or new position. (Walls, ceiling, floors, etc.) completed all as specified and directed. |
| 80 | M & L in repair for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge |
| 81 | M & L for in repair Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge |
| 82 | S&F in repairsvitreous china ware wash hand basin white flat back, size 550x400 mm including brackets complete all as specified and directed by Engineer-in-Charge. |
| 83 | S & F in PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge. |
| 85 | S & F in repair for600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,Complete all as specified and directed by Engineer-in-Charge. |
| 86 | S & Fin repair, Vitreous china squating pan, orissa pattern size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete Complete all as specified and directed by Engineer-in-Charge. |
| 87 | S & F in repairs PVC valveless, syphonic action type, flushing cistern (Twin fush type), low level 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F in repair sinkswithdrainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 89 | S & F in repair, Kitchen plate rack made of stainless steel 1 mm thick with plugs washers asoverall size of 75cm x 75 cm including fixing to wall and all assessaries Complete all as specified and directed by Engineer-in-Charge |
| 90 | S & F in repairs 15 mm bib tap CP, cast copper alloy with capstain head screwed down screwed for iron pipe or for brass ferrule fancy type,complete all as specified and directed by Engineer-in-Charge. |
| 91 | S & F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with capstain head screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 92 | S & F in repairs CP shower roses with CP Arms, 15mm bore, complete all as specified and directed by Engineer-in-Charge. |
| 93 | S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleates (minimum weight300gms) |
| 94 | S & F Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 95 | S & F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 96 | S & F in repair 15mm dia Brass CP Sink mixer (wall mounted) for mixing hot & cold water complete all as specified and directed by Engineer-in-Charge. |
| 97 | S & F in repair 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water, complete all as specified and directed by Engineer-in-Charge. |
| 98 | S & F in repairs Soap dish, brass CP any type, fixed to plugs with chromium plated brass screws Complete all as specified and directed by Engineer-in-Charge. |
| 99 | S & F in repairs, PVC (SWR) pipes 75mm diasingle socketed, in any length with rubber ring joints laid in trenches, floors or fixed to wall,complete all as specified and directed by Engineer-in-Charge. |
| 100 | S & Fin repairs, PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed to wall complete all as specified and directed by Engineer-in-Charge. |
| 101 | S & Fin repairs 75mm bore dia PVC floor trap(SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directedby Engineer-in-Charge. |
| 102 | S & Fin repairs 75mm bore PVC(SWR) door bends any radius complete all as specified and directedby Engineer-in-Charge. |
| 103 | S & Fin repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directedby Engineer-in-Charge. |
| 104 | S & Fin repairs 110 mm bore PVC(SWR) door bends any radiusprovided with access door complete all as specified and directedby Engineer-in-Charge. |
| 105 | S & Fin repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directedby Engineer-in-Charge. |
| 106 | S & Fin repairs 110mm bore PVC (SWR) "P’ trap complete all as specified and directedby Engineer-in-Charge. |
| 107 | S & Fin repairs 75mm bore PVC (SWR) vent cowl, complete all as specified and directedby Engineer-in-Charge. |
| 108 | M&L for complete removal of existing treatment of walls and applying 1 mm thick wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion (OBD) paint on walls complete all as specified and as directed by Engineer-in-Charge |
| 109 | M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying two coats of white (lime) wash complete all as specified and as directed by Engineer-in-Charge. |
| 110 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and flynut complete. |
| 111 | M&L for Complete removal of existing treatment from brickwalls or concretesurfacesincluding scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two coat of cement based paint over a coat of primer including preparation ofsurfaces on walls as specified and directed. |
| 112 | Dismantling Framed timber scantling, 40 Sqcm and over in section in any position including rafters and purlins, wooden planks |
| 113 | M&L for Second Class hard wood and scantling timber framed and fixed wrought |
| 114 | Dismantling boarding, any description, fixed in any position withnails in existing wooden slab complete all as spercifed. |
| 115 | Disconnecting existing water tanks exc 500 liters and n.exc 1000 liters setting aside(or lowering if reqd ) including ,Material and labour for cleaning and removing all scale,dirt and funges etc. from tanks and mouth of circulating pipes, with suitable cleaning chemical and brushing the wall and bottom of tanks, washing with clean water, writing letter i.e. "TANK CLEANED ON ......................(Date)" not exc. 100mm height with synthetic enamel paint for tanks of capacity 500 ltrs to 1000 ltrscomplete all as specified and asdirected. |
| 116 | M & L for wooden panelling of second class softwood 12mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90 cm centre to centre in both direction and including two or more coat of french polishing on all the exposed surfaces wooden panelling including taking down existing electrical fittings and re-fixing the same locations as directedcomplete all as specified and as directed by Engineer-in-Charge. |
| 117 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, Complete all as specified and directed by Engineer-in-Charge. |
| 118 | Material and labour for 100mm thick Cement concrete type B-1, 1:2:4(using 20 mm graded stone aggregate)as flooringandfinishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 119 | Material and labour for25mm thick cement concretetype B-0 (1:2:4) using 12.5 mm graded stone aggregate as in sub base of floorfinish even and rough to receive further floor finishes ( tile/kota stone/ marble ), complete all as completed all as specified and directed. |
| 120 | Material and labour for 75 mm thickcement concrete type D2, 1:4:8 (using 40mm graded stone aggregate)as in sub basecomplete all as spciified and directed |
| 121 | M&L for 75mm thick PCC 1:3:6 type C-2(using 40mm graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
